Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Items tagged "jake"
LEDs By The Dozen
Light emitting diodes. Solid state devices that provide the ubiquitous power and indicator lights on your electronic gadgetry. Unlike lamps, there are no filaments that glow. Rather, some two volts of DC power at a miniscule 10 to 20 milliamps of current get the chemistry excited, and they just plain emit. Emit is a good word, too, as they don't really cast light, but glow brightly. We have a nice assortment of 3 and 5 MM diameter sizes in red, green, orange, and yellow. The longer lead is always positive, the shorter always negative, and you always need a current limiting resistor (about 500 to 1,000 ohms for 5 to 9 volt DC sources) to keep the current in the 10-20 MA range. If that's Greek to you you're either going to blow a lot of LED's or learn to change incandescent indicator lamps ! !
 |
6796 LED ASSORTMENT |
Resistors
We have hundreds of thousands of 1/4 watt resistors which we will send an assortment of (100) 1/4 watt resistors of at least (10) different ohm ratings. All have two axial leads, and 5% tolerance. Don't miss out! This is to cheep to pass up.
|
21970 ASSORTED RESISTORS |
A Snarl of Magnet Wire
One of those sharpie East Coast outfits pulled a fast one on this poor naive Midwestern dealer. The result is we have a pile of exotic coated copper magnet wire. The coatings and colors vary widely, as does the gauge of the wire. With a couple of exceptions there isn't enough of any one kind among the hundreds in the pile to list separately. So we are offering an assortment and you get whatever we grab. Either way you will get a terrific value, particularly if you have an exotic application and get just what you need. Even if you are just making a garden variety coil or electromagnet you will still find the prices are very good. So go ahead, profit from our misfortune. We are glad to be of service. Sigh.
|
36227 MAGNET WIRE, 16 GA | |
|
36228 MAGNET WIRE, 20 GA | |
|
36229 MAGNET WIRE, 24 GA |
Plastic Graduates
The Graduate devotee knows the importance of plastic. To fill the need we offer these fine cylinders of the hard milky white polypropylene persuasion, to help you measure out your chemicals. With a large bases for stability and spouts for pouring, they are just like their glass cousins, except these are cheaper and not heat-resistant (each is marked 20° C ?!). The graduation increments and total volume are shown as increment/total in milliliters.
|
91175 PLAS. GRAD., 0.2/10ML | |
|
91176 PLAS. GRAD., 1/50ML | |
|
91177 PLAS. GRAD., 2/250ML | |
|
91178 PLAS.GRAD., 10/1000ML |
Mashers and Smashers
Porcelain mortars and pestles. Great heavy duty mortars, with sides that are easily 5/16" thick on the smaller ones, and up to 1/2" on the larger. The mortars are glazed outside, but rough inside, the better to grind, and have a pouring lip. The business ends of the pestles are unglazed, while the shafts are glazed. Very functional, very good looking!! So grind your own spices or lab concoctions as you prefer. You get a mortar and pestle as a single order.
| Mortar Dimensions | Pestle Length | |||
|---|---|---|---|---|
|
88314 MORT & PEST, 130ML | 4" OD x 1-3/4" | 4-3/4" | |
|
88909 MORT & PEST, 600ML | 6-1/2" OD x 2-15/16" | 6-3/16" |
Rotary On/Off
Just like your love life?? This switch turns between on and off when the 1/4" dia x 7/8" long shaft is rotated 90°. Rated 120 VAC, 10 amps, it is 1-1/2" x 1" x 1" deep. (2) threaded mounting holes on the face plate and (2) spade connectors complete the picture.
|
29731 ROTARY SWITCH |
Right Angle Driver
Direct that power right where you want it. Inside the metal box are a couple of gears and shafts, what counts, though, is the way it lets you turn a shaft at a 90° angle, with no loss of power. 1/4" splined shaft couplings, male at one end and female at the other. 2" x 1-3/4" x 1" thick overall.
|
27440 RIGHT ANGLE DRIVE |
Popular Tags:
RIGHT
xwalt
zappenfusen
|
Add Tag 
Giant Sucker
Huge black soft rubbery suction cup, 4-3/4" dia with a handle molded onto the back. Made in Taiwan, the French and English labeling suggests it was destined for use as a dent puller or glass carrier. Which is fine if you have dents to pull and glass to carry. If not, use it as a non-invasive and or temporary hanging device in locales where such features are desirable, such as hotel rooms, boat hulls, windows, and the sides of fine antiques (Grandmothers excepted). It is really powerful!!
|
88956 GIANT SUCTION CUP |
Get Your Bearings
Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!.
| O.D. | I.D. | ||||
|---|---|---|---|---|---|
|
32904 BEARING | 1/2" | 3/16" | Details | |
|
39107 BEARING | 1-1/4" | 7/16" | Details | |
|
39108 BEARING | 20mm | 6.5mm | Details | |
|
39109 BEARING | 22mm | 8mm | Details | |
|
39110 BEARING | 24mm | 8mm | Details | |
|
39111 BEARING | 1-1/8" | 1/2" | Details | |
|
39112 BEARING | 1-3.8" | 5/8" | Details | |
|
39113 BEARING | 5/8" | 1/4" | Details | |
|
34239 SEALED BEARING | 46mm | 20mm | Details |
RF? Maybe
Good things come in little packages. In this case the package is a 1-1/4" x 1-1/4" x 1/2" modulator, and the good things are a circuit board with at least a trimpot, electrolytic capacitor, assorted coils, 3-pin connector, RCA plug and (2) pop-off covers. Have a blast.
|
34533 MODULATOR |
Worth Springing For
No large ones, but (101) amazingly assorted small extension, compression and torsion springs -- most, but not all, 1" to 2" long. Assorted lengths, assorted widths, assorted finishes, asorta handy bag of replacement parts to have around the house.
|
92272 101 ASST SPRINGS |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
