
Or antenna splitter if you prefer. Hook the standard flat 300 Ohm lead from your UHF, VHF, FM antenna to one side of this box and (2) identical leads to the other side. Each of the (2) output leads can connect to a different TV input connection. Thus you will couple (2) TV's to a single antenna. 2" x 2-3/4" x 1-1/4".
![]() |
25595 COUPLER, 2 SET |
We have hundreds of thousands of 1/4 watt resistors which we will send an assortment of (100) 1/4 watt resistors of at least (10) different ohm ratings. All have two axial leads, and 5% tolerance. Don't miss out! This is to cheep to pass up.
![]() |
21970 ASSORTED RESISTORS |
What can you do with a thin stainless steel tube? The question should be what can’t you do with a thin stainless steel tube. It's flexible, it's thin, it's stainless steel. What it's for is up to you. Here are the specs: #27529 is 10 feet long,.059” OD, .040” ID.
![]() |
27529 10 FT STAINLESS STEEL TUBING |
Great for chokes, toroids, RFI suppression and much more. Our ferrite cores are attracted to magnets, but are not magnetic themselves. Edges are slightly beveled. 29122 is 1" O.D. x 5/8" I.D. x 1/4" thick. 29180 is 1/2" O.D. x 1/4" I.D x 3/16"thick.
![]() |
29122 FERRITE CORE, 1" | |
![]() |
29180 FERRITE CORE, 1/2" |
And we do mean micro. Sizes #61 to #80 (yes, that is twenty different bits) which are from 0.013 to 0.038 inches diameter!! The big boys sell a set of similar bits (carbon steel, like ours) for about $30.00!! Maybe theirs aren't from China.
![]() |
89087 20-PIECE MICRO ROTARY DRILL BIT SET |
How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.
![]() |
91507 CHUCK KEYS |
Flat plastic Fresnel lens. This flexible magnifier is 7-1/4" x 10-1/4" and only about a millimeter thick. It is great when you need to scan a list or to look for something in a directory. You can see most of the page without moving the magnifier. Only about 1.5 power, but that can make a huge visual difference. The quality is not high, but neither is the price.
![]() |
8665 MAGNIFYING SHEET |
Mini-clips (aka alligator clips) let you make your own low-voltage jumper leads, or repair broken leads on test equipment and chargers. The kit includes (2) 30 amp clips, (2) 25 amp clips, (2) 10 amp clips, (6) 2" clips and (6) 1-1/2" clips, all of which are insulated, plus (10) naked alligator clips.
![]() |
92074 CLIP KIT |
Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!.
| O.D. | I.D. | ||||
|---|---|---|---|---|---|
![]() |
33505 BEARING, 19MM | 19mm | 7mm | Details | |
![]() |
40281 BEARING, 2-7/16" | 2-7/16" | 1-3/16" | Details | |
![]() |
39108 BEARING, 20MM | 20mm | 6.5mm | Details | |
![]() |
39900 BEARING, 23MM | 23mm | 13mm | Details | |
![]() |
39110 BEARING, 24MM | 24mm | 8mm | Details | |
![]() |
39905 BEARING, 35MM | 35mm | 15mm | Details | |
![]() |
39901 BEARING, 40MM | 40mm | 23mm | Details |
That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Small one is 15/16" dia x 7/16" thick with a 3/8" bore and a slight taper and very light striations on the wider face. The middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper. The largest is 1" dia x 17/32" thick with a 3/8" bore.
![]() |
36271 LARGE BUSHING | |
![]() |
36269 MEDIUM BUSHING | |
![]() |
36270 SMALL BUSHING |
We've never seen anything quite like these little clear glass vials, which means they must have myriad uses, particularly at this price. The large one is 1-3/4" tall x 15/16" dia with a shoulder and a 1/2" ID lipped mouth on the top, leading into a 1" deep conical cavity. The bottom has a 5/8" mouth, with an internal lip, and opens into a cavity around the little conical reservoir. So you can fill either end. Which would hold maybe a couple of ccs one way, or 1/4 oz the other way. The little one is the same, but is 1-9/16" tall x 5/8" dia and a 1/4" ID mouth on top, 7/16" on the bottom. We're thinking obscure lab experiments, or chimneys for streetlamps in model railroads. Or something.
![]() |
37111 LG. INJECTION VIAL | |
![]() |
37110 SM. INJECTION VIAL |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »