
This connector is 3-3/8" of straight "in-line" plastic with 5/8" ridges only and a 13/32" I.D. It has a separator rib around its mid-section.
![]() |
24352 IN-LINE CONNECTOR |
Good red neon indicator light of the square variety. Operates on 125 VAC, 1/3 W. It snaps into a 1-1/8" x 1/2" panel hole and is 1-5/16" deep including the (2) spade connectors. The white plastic bezel and housing surrounds a 13/16" x 3/8" red lens. Probably an on indicator from an appliance or tool.
![]() |
23744 RED NEON INDIC. LIGHT |
Zipseal plastic bag of the size gnomes use to store leftovers. 1" sq, 2" sq, 2" x 3" or 3" x 4" (our each come in bags of 100 count), clear polyethylene (the 2" x 3" 27906 has a white strip across one side, 36562 does not.). Store rings, small rock samples, biology parts, and model pieces. Great for cleaning up behind your Guinea pig when you take him for a walk.
![]() |
90273 POLY BAG, 1" | |
![]() |
27906 POLY BAG, 2" X 3" (STRIP) | |
![]() |
90274 POLY BAG, 2" | |
![]() |
36562 POLY BAG, 2" X 3" | |
![]() |
34552 POLY BAG, 3" X 4" |
Rejoice, we have finally found a source of reasonably priced borosilicate lab glassware. This is the kind of glass in the trade marked Pyrex(tm) and Kimax(tm) labware. The stuff you can put right over the flame of the Bunsen burner, or directly onto the hot plate. This stuff is imported from China, and is considered student grade, which is good enough for anything but the most exotic applications. We have beakers, test tubes, graduated cylinders and flasks. Compare the prices below and you will see that they are around half the U.S. equivalent. Call us for larger quantity prices.
![]() |
88987 BEAKER, 1000ML | |
![]() |
92611 BEAKER, 2000ML | |
![]() |
88985 BEAKER, 250ML | |
![]() |
88984 BEAKER, 50ML | |
![]() |
88986 BEAKER, 600ML | |
![]() |
88993 ERLEN FLASK, 500ML | |
![]() |
88992 ERLEN. FLASK, 250ML | |
![]() |
88991 ERLEN. FLASK, 50 ML | |
![]() |
88989 GRADUATED CYL. 100ML | |
![]() |
88988 GRADUATED CYL. 10ML | |
![]() |
88990 GRADUATED CYL. 250ML | |
![]() |
88995 TEST TUBE, 13X100MM | |
![]() |
88996 TEST TUBE, 16X150MM | |
![]() |
88997 TEST TUBE, 20X150MM | |
![]() |
92614 TEST TUBE, 25X150MM |
One of those sharpie East Coast outfits pulled a fast one on this poor naive Midwestern dealer. The result is we have a pile of exotic coated copper magnet wire. The coatings and colors vary widely, as does the gauge of the wire. With a couple of exceptions there isn't enough of any one kind among the hundreds in the pile to list separately. So we are offering an assortment and you get whatever we grab. Either way you will get a terrific value, particularly if you have an exotic application and get just what you need. Even if you are just making a garden variety coil or electromagnet you will still find the prices are very good. So go ahead, profit from our misfortune. We are glad to be of service. Sigh.
![]() |
36227 MAGNET WIRE, 16 GA | |
![]() |
36228 MAGNET WIRE, 20 GA | |
![]() |
36229 MAGNET WIRE, 24 GA |
They have the look of something designed for the space program. They're mylar, a paper-thin shiny metallic sheet, that comes in handy when your car breaks down in winter, or when you're separated from your climbing group on the slopes of Mt. McKinley. Barring that, they're also a perfect material for a do-it-yourself cold-climate Halloween costume-near impossible to rip by hand, but cut easily with scissors. There's no padding, so they wouldn't be too comfy on your bed, but they sure are warm. They both come folded about the size of a wallet. The Blanket is 52" x 82", the Sleeping Bag is 34" x 84".
![]() |
91007 EMERGENCY BLANKET | |
![]() |
91432 MYLAR SLEEPING BAG |
Here are the ins and outs of submersible pumps for your DIY fountain.These small electric pumps run on 24 VAC (For low energy consumption.) from the included wall outlet adapter, are rated for continuous duty, have (3) suction-cup feet, an adjustable flow control and both a straight and 90° 5/16" tubing adapter. This little pump is roughly 2-5/8" x 1.5" x 2-1/4", has a 6-ft power cord with an in-line switch, and pumps 70 gal/hr @ 1 ft lift. Plug it in and go with the flow. Indoor use only.
![]() |
91348 INDOOR PUMP |
Tubing for all your tubing needs. We have rubber, acrylic, vinyl, and PVC, in a variety of somber colors. All are nice and flexible like a tube ought. And they're all at our typically low, low prices. See the table for the specs.
| Material | Color | ||||
|---|---|---|---|---|---|
![]() |
25401 TUBING, 1/4"X3/8" | PVC | Green | Details | |
![]() |
27669 TUBING, 1/8"X3/16" | PVC | White | Details |
Porcelain mortars and pestles. Great heavy duty mortars, with sides that are easily 5/16" thick on the smaller ones, and up to 1/2" on the larger. The mortars are glazed outside, but rough inside, the better to grind, and have a pouring lip. The business ends of the pestles are unglazed, while the shafts are glazed. Very functional, very good looking!! So grind your own spices or lab concoctions as you prefer. You get a mortar and pestle as a single order.
| Mortar Dimensions | Pestle Length | |||
|---|---|---|---|---|
![]() |
88314 MORT & PEST, 130ML | 4" OD x 1-3/4" | 4-3/4" | |
![]() |
88909 MORT & PEST, 600ML | 6-1/2" OD x 2-15/16" | 6-3/16" |
We have obtained a large number of real natural corks, mostly surplus with a few fill-ins bought commercially. They range across the popular sizes used in science labs to seal vessels (drill your own holes for glass tubing, etc) and to use as floats. Or just use them to seal bottles that don't have closures or cry out for a decorative seal.
| Top Dia. | Bottom Dia. | ||||
|---|---|---|---|---|---|
![]() |
92688 CORK #0 | 3/8" | 9/32" | Details | |
![]() |
88746 CORK, #00 | 5/16" | 7/32" | Details | |
![]() |
92718 CORK, #1 | 7/16" | 5/16" | Details | |
![]() |
89230 CORK, #10 | 1" | 3/4" | Details | |
![]() |
89232 CORK, #16 | 1-3/8" | 1-1/16" | Details | |
![]() |
1711 CORK, #2 | 1/2" | 7/16 | Details | |
![]() |
89234 CORK, #20 | 1-5/8 | 1-5/16" | Details | |
![]() |
88748 CORK, #3 | 9/16" | 7/16" | Details | |
![]() |
23594 CORK, #5 | 11/16" | 9/16" | Details |
Affordable, adaptable lab equipment for serious scientists with laughable budgets. The basic stand is heavy black metal 8" long x 5" wide x 1" high with a 19-1/2" x 3/8" dia support rod screwed into it. Position a beaker or bunsen burner on the stand and build the configuration you need above it. Both of the Burette clamps and the ring attach to the rod with thumbscrew clamps. The Burette clamps have wing nuts so they can be adjusted to any angle. The single clamp extends 4" from the rod, with rounded, uncoated, adjustable metal jaws with spring tension and a wing nut. The double clamp like it has rubber-coated jaws. The 3" metal support ring holds the 6" x 6" heavy-gauge steel-mesh burner screen with crimped edges. Nice, solid equipment at a rare price.
![]() |
88192 3" SUPPORT RING | |
![]() |
91831 6" X 6" SCREEN | |
![]() |
88597 DOUBLE CLAMP | |
![]() |
88195 LAB STAND | |
![]() |
88186 SINGLE CLAMP |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »