
More subtle than regular white zip-ties, these dark green ties were made to blend in with floral leaves and stems, but are unobtrusive wherever you use them. And the (75) pieces, all 3/32" wide, give you (35) 3-3/4" long, (20) 5-1/2" long, and (20) 8" long ties. Handy to have around.
![]() |
39813 SKINNY ZIP TIES |
Dowel rod, pine. Finished in a light varnish. Measures 30" long x 3/4" dia, with (1) flat-cut and (1) slightly rounded end. Like the handle for those one-hand brooms that bellboys used in old movies, or the body of a small hobbyhorse. We'll send (4) for less than a buck each. You can't beat that with a stick.
![]() |
39877 DOWEL ROD |
Great for roboticists, too. It's a mighty-mite, this little 6VDC 45 RPM motor with a right-angle gearbox. Draws 13mA, no load, and stalls at 120mA. Output is through (2) double-flattened 1/4" dia x 3/16" long shafts on opposite sides of the white plastic housing, both with 1/16" dia center holes. Measures 1-7/8" x 7/8" overall. Gear ratio is 228:1.
![]() |
94000 45 RPM GEAR MOTOR |
Build your own. This is a very nice kit from Tamiya, but not for beginners or the fumble-fingered, since it’s fairly complex and can take a couple hours to assemble. The Twin Gear Motor Kit has a pair of 2.3VDC motors that draw approx 60mA no load, stall at 130mA, and will run 60 to 212 rpm. Finished size is approx 3" long x 2" x 7/8" with dual 1-1/16" long x 1/8” dia hexagonal shafts.
![]() |
93998 TWIN GEAR MOTOR |
A great display base for those extra-special tchotchkes, usually glass or crystal, that benefit from oscillating red, yellow and blue LEDs flashing up from beneath them. This black-plastic base with Chippendale-ish feet is 3” square x approx 2” tall, with a 2” square top. The top is a clear-plastic grill with the lights and a diffraction sheet under it to give it an iridescent effect. You add (3) “AA” batteries.
![]() |
39967 BLACK LED BASE |
No, no, we mean actually cool, as in no heat and no laminating machine needed. (In fact, you can't put them in hot laminators.) You get three 5-packs of clear, 2-1/2 x 4" sleeves (1/2" bigger than business cards) for a total of (15). Made to be used with a Cool-Seal Laminator, but you can just slide the card or paper inside, and press together or put in a book for few minutes. Trimmable after sealing.
![]() |
39070 LAMINATE SHEETS |
The Surface Gard® is a 99-piece pack of felt protectors to keep your floors and tabletops scratch-free. Includes dark-brown felt in a big 6" x 4" piece to custom-cut, a dozen 3/4" squares and 3/4" rounds, and (24) 1/2" rounds, plus (50) white felt 3/8" rounds. All self-adhesive.
![]() |
40183 FELT PAD PACK |
Big and bright, with (3) red LEDs flanked by (2) yellows in a 5" wide x 2" high x 1-1/4" thick housing with a belt clip and handlebar bracket. Flashes fast or slow, right to left and vice versa, or constant on. For joggers, bikers, hikers, kids, road emergencies or any other time when visibility is important. May also be clipped to a bride's tiara for finding her at a crowded wedding. Water resistant. You add (2) "AA" batteries.
![]() |
94103 5-LED FLASHER |
Inflatable 30” high basic female torsos. Life-size. White plastic. Nice 30" chrome chains at the top with carabiners so you can hang them up. Perfect for display mannequins in some stores. "Not to be used," the packaging warns us, "as a flotation or life-saving device." Other than that, we don't want to talk about it.
![]() |
40590 BASIC FEMALE NOT ILLUMINATED INFLATABLE TORSO |
Just imagine what you could do with this nifty pair of 3-volt motors (our each is a set of 2). The motors, each of which draws 700 mA and spins at 1,000 rpm, are in white-plastic housings 2-1/2" thick x 2-7/8" dia OA, and are connected by a 15" wire harness with a battery contact and a high/low/off switch. Peeking out from each housing and driven by each motor is a soft, black-rubber wheel 3/8" wide x 3/4" thick x 2-1/2" dia. Think toy race track, and spin out from there!
![]() |
35298 3V MOTORS, PAIR |
Meet the stainless steel wallet. Woven from stainless steel thread, the mesh feels like silk but prevents in-pocket scanning of credit cards and IDs. Extremely thin, extremely hip, and much more durable than skin from a dead cow. Measures approx 4-1/2" x 3-1/2" x 1/3" thick when folded and has (1) windowed ID pocket, (5) card slots, (2) pockets under the card slots and (2) compartments in the billfold area. A must for DeLorean fans.
![]() |
94138 RFID BLOCKING STAINLESS STEEL WALLET |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »