
It's hard to make a good exit if your feet keep slipping off the pedals. We have acquired (2) styles of replacement bike pedals, so you can depart in dignity. Cheap dignity. Flat-top pedals give each foot a 3-1/4" x 4-1/4" hard plastic platform on a shaft with 1/2" dia x 7/8" threaded end. Both pedals threaded counter-clockwise. These "excel" pedals may have been made for an exercise bike. Concave pedals are 1-3/16" thick and have slightly dished 2-5/16" x 4" faces. These come in lefts and rights (you'll get one of each) with 1/2" x 1/2" clockwise and counterclockwise threaded shafts.
![]() |
27223 FLAT-TOP PEDALS |
Plastic safety goggles with a clear, fairly hard single pane front. The wrap around is clear The top and sides have dozens of little holes for ventilation and the whole is big enough to fit over regular glasses comfortably. An elastic strap holds them in place. Made in China.
![]() |
20647 SAFETY GOGGLES |
Miniature 5–1/2" steel needle files. They come in the usual assortment of flat, wedge, triangular, and round shapes, (10) in all. They seem to be pretty uniformly fine with none that we would call coarse. Made in China, they come in a vinyl carrying case that snaps shut. Not as classy as some of the sets we have seen in the $12.00 range, but perfectly serviceable for most applications. And at a third the price.
![]() |
10900 NEEDLE FILES |
Just because hospitals toss 'em after one use doesn't mean you should. These are sterile scalpels, and they're ultra-handy in the shop or craft room. Measure 6" long with snap-off blade shields. You pick #10 with a rounded profile or #11 with pointed blades
![]() |
89241 SCALPEL, #10 | |
![]() |
89243 SCALPEL, #11 |
Diamond point bits that, if used by your dentist would send you through the roof. The assortment of bits includes cylinders, cones (points), balls and a couple of special shapes all in a variety of sizes. In the set of (20), each has 3/32" dia. shank and is about 2-3/4" long OA. In the set of (10), each has a 1/8" dia. shank and is about 1-3/4" long OA, with larger size bit heads. Both come in plastic cases. A craftsperson's delight!!
![]() |
91246 DIAMOND POINTS, SET (10) | |
![]() |
89137 DIAMOND POINTS, SET(20) |
Mystery Boxes of stuff like what you see in the catalog. Maybe we had a little left but not enough to continue the listing. Maybe we only got a few as part of an odd lot. Maybe we just lost some, and just found them in our warehouse. You will get items which originally listed for at least $25.00 total in our catalog (or would have, if we had enough). You pick. The "electro-mechanical" box has things like motors, switches, hardware and components that are useful parts but want to be worked into something bigger. The "consumer" box has more ready-to-go type items, and things that don't have as technical a flavor, like bottles, toys, books and giant rubber bands. The fun is in the mystery and surprise. Perfect if you don't know what to give Aunt Maude and Uncle Ned, or if you can't decide how to bring your order up to the minimum. Every couple of months the contents will keep changing, so even if you have gotten a box before, feel free to order again! (Please note: Ordering multiple boxes at the same time will result in duplicate items.)
![]() |
23610 CONSUMER SURPRISE BOX |
You schuss down the slope and come to a perfect stop at the edge of the chalet deck just as the (you hope to be) love of your life steps out and hands you a cup of hot buttered rum. You slip off your mitten and reach for it, a broad grin on your face and-OOOOPS! There goes the mitten under the deck. The possibility of love everlasting fades with your clumsiness. But wait! True love can be yours with the handy dandy AS&S wrist straps! Yes, just snap the clip to the ring on the mitten, slip the 5" or 9" loop over your wrist, and never worry again about ending up alone in a basement apartment eating cat food. Braided nylon, the 9" in black, the 5" in a variety of colors with chrome plated clips.
![]() |
29829 WRIST STRAP, 5" | |
![]() |
29221 WRIST STRAP, 9" |
A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that forms a flange over one face and lines about 3/4" of the length of the 1/4" dia bore. Use it as a grommet, a shock mount, or both. With or without a brass wire hanger that is set under the insert flange and extends 1" to the side. The hanger is bent to hold a 1/4" dia wire.
![]() |
30601 GROMMET W/ HANGER | |
![]() |
30443 GROMMET W/O HANGER |
Porcelain mortars and pestles. Great heavy duty mortars, with sides that are easily 5/16" thick on the smaller ones, and up to 1/2" on the larger. The mortars are glazed outside, but rough inside, the better to grind, and have a pouring lip. The business ends of the pestles are unglazed, while the shafts are glazed. Very functional, very good looking!! So grind your own spices or lab concoctions as you prefer. You get a mortar and pestle as a single order.
| Mortar Dimensions | Pestle Length | |||
|---|---|---|---|---|
![]() |
88314 MORT & PEST, 130ML | 4" OD x 1-3/4" | 4-3/4" | |
![]() |
88909 MORT & PEST, 600ML | 6-1/2" OD x 2-15/16" | 6-3/16" |
We have obtained a large number of real natural corks, mostly surplus with a few fill-ins bought commercially. They range across the popular sizes used in science labs to seal vessels (drill your own holes for glass tubing, etc) and to use as floats. Or just use them to seal bottles that don't have closures or cry out for a decorative seal.
| Top Dia. | Bottom Dia. | ||||
|---|---|---|---|---|---|
![]() |
92688 CORK #0 | 3/8" | 9/32" | Details | |
![]() |
88746 CORK, #00 | 5/16" | 7/32" | Details | |
![]() |
92718 CORK, #1 | 7/16" | 5/16" | Details | |
![]() |
89230 CORK, #10 | 1" | 3/4" | Details | |
![]() |
89232 CORK, #16 | 1-3/8" | 1-1/16" | Details | |
![]() |
1711 CORK, #2 | 1/2" | 7/16 | Details | |
![]() |
89234 CORK, #20 | 1-5/8 | 1-5/16" | Details | |
![]() |
88748 CORK, #3 | 9/16" | 7/16" | Details | |
![]() |
23594 CORK, #5 | 11/16" | 9/16" | Details |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »