
Slightly larger than some of our hobby motors, this Mabuchi RS-365SH double-shaft motor is a good choice for science-fair projects. Its range is 6 VDC, 50 mA, 550 rpm to 24 VDC, 80 mA, 2,000 rpm. The 3/32" dia shaft extends 5/8" from the terminal end of the 1-1/2" x 1-1/16" dia motor, and 3/8" from the other end. It has (2) 5" leads.
![]() |
35567 MABUCHI MOTOR |
This deluxe ABS storage case is called a Store-It-ALL, and it does. But it could be called a Carry-It-ALL, for the sturdy handle and locking clasp, or it could be called a See-It-ALL, for its translucent lid. Or a Fits-It-ALL, for the removable dividers that let you configure it with any number of compartments from 5 to 26. But the 12" x 18" x 3" OA case should really be called ALL-I-Ever-Needed- To-Get-Organized!
![]() |
92454 STORE-IT-ALL |
We don't know exactly what this doohickey is for, but we're sure that if we were selling it to the government, it would cost at least a couple of hundred dollars. Labeled an ASM Cable Sensor (JKM Part #QMPD9700-3493-01), it has (2) 32" leads and a 1/8" dia eye in a 17/32" x 13/32" x 3/8" casing. It has a nominal impedance of approx 120,000 ohms in normal ambient light, and will go down to 750 ohms in bright light. If you want a bulk price so you can peddle this to Uncle Sam, just call. We can talk.
![]() |
35134 OPTICAL SENSOR |
Start with one naked wire or a number of them, and a piece of our clever tubing, and end up with nice, tightly covered wire. For the specific diameters below, our each is a package of (10) 12" pieces of heat-shrink tubing. For an assortment of sizes, our each is a dozen pieces of 4" long tubing. You'll get (4) pieces each in 1/8", 1/4" and 1/2" diameters. All sizes are black. All will shrink to trim diameters half their current size when heated to 125°C/257°F. If only it worked on waistlines.
![]() |
92441 1/2" SHRINK TUBE | |
![]() |
92440 1/4" SHRINK TUBE | |
![]() |
92439 1/8" SHRINK TUBE | |
![]() |
93365 1/8"-1/2" ASST. SHRINK TUBE |
Stick that hot pencil-style soldering gun or woodburning tool into this stand. The base is approx 5" x 3-1/2" x 7/8" in black-painted steel. The holder is a 4" x 1-3/8" dia protective outer coil with an inner metal sleeve, plus a little sponge for wiping your iron.
![]() |
92713 SOLDER STAND |
Our delovely desoldering device is de spring-loaded suction type, 10-3/4" long. Depress de pump, heat de circuit board pad, squeeze de button, and de solder deesappears. Devious little devil.
![]() |
92812 DESOLDERING PUMP |
WARNING: CHOKING HAZARD-Small Parts. Not for children under 3 yrs.
Or gear down-for the science fair or for any number of hobby projects. This hard-to-find set of (3) combination spur/beveled gears-for when you want gears set either straight or at 90° to one another-also has one small spur gear, plus three bushings. All in red, green, or blue plastic (we'll pick). The combo-beveled gears are 1-5/8", 1-1/4" and 27/32" dia with 3/16" bores to accept the bushings, which are 3/16" OD, 3/32" ID. The straight gear is 17/32" dia with a 1/16" half-bore. All are 24 pitch.
![]() |
92657 GEAR SET |
Our pocket-sized multimeter measures a tiny 3-5/8" x 1-3/4" x 1" thick, with a 3-1/2 digit display on a 1-1/4" x 9/16" LCD screen. Will measure up to 500VAC, 100VDC, current from 200uA up to 10A, resistance up to 2000K ohms, and will also test diodes and transistors. Comes with (2) 24" test leads and a battery to power it. Teeny price to match its size. Great for science fair projects.
![]() |
93148 MULTIMETER |
When you could just order this 480-pack of 1/4 watt, 5%-tolerance resistors. You'll get (30) pieces each of 10, 22, 47, 100, 220, 470, 1K, 2.2K, 4.7K, 10K, 22K, 47K, 100K, 220K, 470K, and 1M OHM.
![]() |
93191 480 RESISTORS |
This reversible DC Johnson motor (Johnson #34513) operates from 12-24VDC with a max efficiency of 24VDC, 3057 rpm, and .14 amps. Measures 1-3/16" dia x 1-3/16" long with (2) hook-up tabs on the back and a 3/32" x 5/16" long slotted shaft. Has (2) mounting holes on the face. Works great as a small generator, output 2.5-3 V. Draws 30mA no load, and spins about 1200 rpm at 12VDC.
![]() |
37855 JOHNSON MOTOR |
You'll get two-fer-cheap. This permanent-magnet DC motor from Molon operates from 6-12VDC, max efficiency at 12VDC, 11,100 rpm at 1.40A. Measures 1-1/2" long x 1-1/16" dia with a 3/8" long x 3/8" dia striated shaft. Has (2) mounting holes on the face and power tabs on the back. Molon model numbers CMO-1237 and FRS-385S-2358N
![]() |
37857 MOLON HOBBY MOTOR |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »