
Affordable, adaptable lab equipment for serious scientists with laughable budgets. The basic stand is heavy black metal 8" long x 5" wide x 1" high with a 19-1/2" x 3/8" dia support rod screwed into it. Position a beaker or bunsen burner on the stand and build the configuration you need above it. Both of the Burette clamps and the ring attach to the rod with thumbscrew clamps. The Burette clamps have wing nuts so they can be adjusted to any angle. The single clamp extends 4" from the rod, with rounded, uncoated, adjustable metal jaws with spring tension and a wing nut. The double clamp like it has rubber-coated jaws. The 3" metal support ring holds the 6" x 6" heavy-gauge steel-mesh burner screen with crimped edges. Nice, solid equipment at a rare price.
![]() |
88192 3" SUPPORT RING | |
![]() |
91831 6" X 6" SCREEN | |
![]() |
88597 DOUBLE CLAMP |
$13.95
EACH
Out of Stock. Check Back Soon! |
![]() |
88195 LAB STAND | |
![]() |
88186 SINGLE CLAMP |
Stethos is Greek for chest. Indeed you can scope your stethos with this stethoscope, or your friend's or your dog's. But it works equally well for picking up any sound being transmitted through a solid medium. Listen to the air flowing through the heating ducts, the water in the pipes, the sounds of machinery, the termites munching on the floor joists!! The color does vary so we will select from what's currently available. We've had blue, teal, red, black, burgundy, green and purple, but there may be other colors yet to be seen! A great discovery device whether for biology or other pursuits. Not of professional quality, but not just a toy.
![]() |
11077 STETHOSCOPE |
A fine concept and pretty successful execution. Weighted bases hold fully adjustable clips and lenses for delicate hands–free work. The Helping Hand w/solder has a 2” high base connected to (2) alligator clips via (3) universal joints and a 4–1/2" sliding beam, and to a 2–1/2" dia roughly 3X magnifier via another universal joint on the sliding beam. It also adds a holder for your soldering iron, plus a hole and thumbscrew in the base to firmly position it. The larger Work Stand has a 3–1/2” x 4–3/4” stand with a 2–3/4” square x 3/8” deep reservoir to hold small parts, an L–shaped sliding beam with (2) alligator clips, and another L-shaped beam with a 3–1/2” lens, about 4X magnification. Joints adjust every which way. The set screws can all be hand–tightened, but we suggest a small pliers to secure the hefty 4X lens. Think of the clips as extra hands to hold wires, components, beads, what-have-you while you perform some operation on them with your own two hands.
![]() |
92280 HELPING HAND W/SOLDER | |
![]() |
91855 WORK STAND W/MAG. |
Our aluminum canisters with clear glass pull–off lids are cool. The smaller canisters are aluminum–colored, a set of (20) 1–1/4” dia x 3/4” deep in a 6–1/2” x 5–1/4” x 7/8” lightweight aluminum box with a hinged lid. When the box is shut, a layer of foam padding inside the lid presses down on the canisters, keeping them securely closed. If you need slightly larger canisters, and a cardboard box will work instead of a carrying case, try our colorful display of anodized tins. They are packaged in sets of (12) and come in great assorted colors and are 2” dia x 7/8” deep. Each is an ideal carrying case for paints, many different screws, or other sets of small items or quantities that must remain separate. Prices are per set.
![]() |
91895 (12) 2" ASSORTED COLORS | |
![]() |
89964 (20) 1-1/4" ALUMINUM COLORED |
How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.
![]() |
91507 CHUCK KEYS |
If you like bowls that say "Pretzels" and address books that say "Addresses," you'll love this 4" x 2-1/2" x 1-5/16" black-plastic box the says "MOM'S JEWELRY BOX" on it in white. It has a mirror on the inside of the hinged lid, a cheesy red liner, and a light-activated music box that plays a snatch of Beethoven - after you find the little electronic device under the removable lining and put in a couple of watch batteries (not included). If you're not into labeling, Mom can be rubbed out with a little denatured alcohol (along with any other letters you choose). Lift out the music module, and you're left with a snazzy black box you can use for storing any number of small items. And you thought it was going to be tacky!
![]() |
33198 MOM'S BOX |
Simple is good, and life don't come much simpler. This U-shaped 1-1/8" deep drawer pull/cabinet handle is molded cream-colored plastic. Matte finish, 3/8" dia, 3/16" unthreaded bores, 4" centers. Recycle a couple of screws from the old handle, 'cause we won't be sending you new ones. Simple.
![]() |
33397 DRAWER HANDLE |
Flexible, strong and wiry. No, not one of those guys who climbs rock walls for fun. We're talking about our roll of 24-gauge (.023") solid wire that we believe is stainless-steel. Perfect for the workshop, and a nice weight for hobbies from bead-stringing to wreath-making. We'll clip off 20 ft to share with you.
![]() |
33463 24-GAUGE WIRE |
"Laser" safety lights each with super bright LEDs run by (2) "AA" batteries that you supply. It's square and has a flashing or steady LED lamp visible up to 2500 feet (distance may be exaggerated). A 2" x 2-1/2" red plastic reflecting lens covers (3) lamps. Hook it on your belt or pack with the belt clip, use the included elastic strap for arm or leg mounting, or the included aluminum flange to attach it to your bike.. It's great for general use as a warning device or as an emergency signal for roadside breakdowns.
![]() |
89594 LASER SAFETY LIGHT |
There are temporary tattoos all over the place, but how many of them glow in the dark? Our (6) packs, that's how many. Each pack holds a 5" x 5-1/2" sheet full of tattoos, most 1/2" to 2" across. The spirals and tai chi designs are black and white, the rest are in full color.
![]() |
33552 PEACE/LETTERS TATTOOS |
Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.
![]() |
10955 RIFFLER FILES |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »