The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.

What we have here is a bunch of toggle switches rated at 20A, 12VDC (Max) with LED lights in their tips so you can tell when your rockets are hot and ready to launch. On/off 2-position standard size toggles, SPST. with a 12mm neck and mounting nuts. We've matched each with a classic flip up cover so all your friends at the airfield will think you are cool. Switch measures 1" x 9/16" x 1-1/8" overall with cover 2" x 1-3/4" x 9/16". Each has (3) spade terminal connectors, (2) are switch contacts and third is to power LED. Already have some toggles to cover? Pick-up the (2) packs of opaque plastic ones in carbon fiber-pattern or solid red.

These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut. There's also an internal 12V 3W replaceable indicator bulb. Needs 3" of rear clearance. You pick a red, green or yellow lens.

This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.

These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA. On-Off-On.