Nifty little display motor has (3) gears operating a 7-5/8” long pivoting plastic arm that swings to and fro a tad faster than twice a second. Mounted in a 4-3/4” x 3-5/8” x 1-7/8” white plastic box. All you add is a (1) D-cell battery, and something to wave. A good battery and it will go for hours and hours.

This bipolar, 2-phase stepper motor from Shinano Kenshi Corp (SKC) draws 500mA at 9VDC with a 0.9 deg./step. Coils are brown/orange and red/yellow. Measures 1-7/16" dia x 1/2" with a 4" long, 3/8" threaded shaft, and mounting wings with 1/8" holes.

That’s us, a breath of fresh air in the shopping atmosphere. Also, your source for these surplus Swiss-Air™ II Freshener Systems--one with a motion activator, and one without (you pick). Originally took cartridges that freshened the air with cherry, orange, berry, potpourri or other scents. Do they work? Might could, as they say in Nowth Car’lina, but we’re selling them for parts. The wall-mount cases measure 7-3/4" x 3-1/2" x 3-1/8” in cream plastic, with a cover that comes off to reveal a dandy 1.5V motor with a 5-blade fan, and terminals for a D cell battery. Motor is 1” dia x 1” long, shaft is 1/16” dia x 3/8” long, and fan blade is 2-3/8” dia.

This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2" dia plastic sprocket on the side with the leads. The white lead feeds a Hall effect sensor, then ground, +5V control, and then the three coil leads  Samsung P/N 02914900.