Want to turn your phone or tablet into a storage dynamo? Of course you do -- you've got data! This 5" long cable has a micro USB male fitting at one end and a standard USB female connection at the other, which enables you to use a standard thumb drive on devices that only accept a micro USB. Transfer the 2,738 photos from the picnic off your phone or plug in your USB stick of Yanni music; an On-The-Go data necessity.

Our each is a dozen nickel-plated 2” long steel alligator clips with PVC sleeves but no boots because they’re made for electrical testing or soldering. You’ll get (6) each with red and black sleeves.

This 5-pin socket is already wired with 9" leads in black, red, white, yellow and blue to its quick-disconnect sockets, ready for your 1/4" or 7mm spade terminals. Housing is slotted so you can interlock them end to end. Measures 1-1/4" x 1-1/16" x 1" thick. Matches our 94746 relay.

This pair of 3” pliers-style alligator clips for quick wire connections have red and black insulator boots, and are good for up to a whopping 30A. Crimp connections are under the rubber insulators. We'll send you (2) pairs because you can't charge a battery without (4) clips. 

From the electric swamp. Our each is a six-pack of 2” plated alligator clips with screw terminals, waiting for you to shove some 14-18 gauge wire down their throats--or in their necks, we guess.

It’s a sweater in England, but here it’s a 4" double cord with a molded female 1/8” standard headphone jack at one end, and molded left-right (white-red) male RCA jacks on the other.

Multi-purpose, plated, center-spring charging clips. You pick; the 2” clips with 3/8” wide jaws for up to 10A, in packs of (4); or the single 4” clip with 3/4” wide jaws rated for up to 50A.

You get (3) packs of Gardner Bender black heat-shrink tubing, at least (2) different, from our selection of 3/16", 3/8" and 3/4", all 4" long. This is the best way to keep your wires tidy and packed in, and watching that tube shrink into shape is worth the project alone.

These 0.1uF ceramic capacitors have potted radial leads of stranded wire and are rated for up to 250V. Measuring 1-1/2" x 1/2", these are older-type capacitors and are probably more for point-to-point wiring, not PCB mounting.

Our 4-position terminal block is rated for 300V and measures 3/4" x 5/8" x 5/8" tall with set-screw terminals and a 3.6mm ID. 300V max rating. CSA.