Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.

The interior decoration version of the Krummlauf gun (just groogle it, OK?), this 2-1/2" wide polyester-bristle paint brush has a semi-circular ring as part of its handle so that it swivels 90 degrees right or left, and front to back. Tightens with a thumbscrew clutch on the 6-1/2" long handle. Remove the handle and it's a 5-3/4" long brush on a ring. Jim dandy handy for painting behind fixtures, inside bookshelves, anyplace with limited access.

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.

Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.

Or bag something else in this olive drab unwashed 100% cotton canvas mechanics tool bag with webbing carry handles. Bag measures 11" x 7" x 6" with a zippered middle compartment, which is wide open with (8) interior side sleeves to hold pencils, tire gauges and items like that. Also has (2) double-zippered side compartments, (1) adorned with cool-looking orange printed tech info about the bag. Firm bottom permanently sewn in. It’s a sturdy, handsome little bag, no two ways about it.

From Morris Products, this heavy-duty plastic resin toolbox is lightweight and both weather- and impact-resistant. In gray and yellow, it has lid snap locks, a hasp for a small padlock, and an interior removable tray with a handle. The top has a fold-down handle, (2) slide-out lidded storage containers, plus a 20-slot driver-bit keeper. Measures approx. 16" x 10” x 7” deep.

Could be what you do if you’re buried alive, or if you want to dance your life away, but most likely it’s a description of the machinist’s friend. This tap & die set cuts straight, clean threads and includes a 1/8” to ¼” tap wrench, and a tap & die in 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, 1/4 – 20 NC and 5/16 – 18 NC. In drop-forged, heat-treated steel coated with titanium nitride. Titanium tools!

These lights have COB LEDs in a 3-2/4” x 1-1/4” lens that rotates 250 degrees out of a red and black triangular housing. Two magnets in the base make them perfect for shedding light down on a locker shelf or workbench, or as a work light stuck on the underside of a car hood or trunk lid. Also has (6) LEDs on one end, so it will also function as a flashlight. The push-button lights the lens and flashlight in sequence. The housing measures 5” long x 2-1/8” on a side. You add a quartet of “AAA” batteries.

Hang on to your widgets, screws, bolts, pins and assorted teeny tinies while you're taking things apart. This indispensable 6" dia x 1-1/8" deep magnetic stainless steel dish from Omaha Tools holds all those parts and saves you from crawling around on the floor later, when you're putting things back together.

Shove these down the throat of your bigger bottles or tubes and clean up. Measure 16" long over all, with 4" long x 1-1/2" dia spiral nylon bristles on a stainless steel handle and a small, but bendable, metal nub on the bottom.