Our each is a set of (4) removable sink strainers with stainless steel mesh wells and flat rims. The set includes (1) 4-1/2" dia for 2-1/4" drains, (1) 2-3/4" dia for 1-1/8" drains, and (2) 2" dia for 3/4" drains.

Two guys from our warehouse and a truck? Sorry, our guys aren't all that hefty, but we can lend you a hand with this Hefty Haulers Furniture Moving Kit. Lifts up to 2,600 pounds (which is about 2,400 pounds more than any two guys in our warehouse can lift anyway) with the lever/crane, and lets you wheel up to 960 lbs. of stuff around on (4) handy little trolleys (240 lbs. max each). Slide the lever under the corner of the fridge, washer, sofa, file cabinet or any other weighty item, lift it off the floor, slide a trolley under it, repeat on the other three corners, and roll the item along. Trolleys rotate 360 degrees and have swivel wheels. Kit includes a lever, cradle and (4) trolleys, plus (4) risers and (4) mini-risers for items with longer legs. Works on wood, tile and floors with short-pile carpeting. Truck not included.

These are the split rings with the beveled profile, the good ones. The bevel and the largeness of these rings translate to fewer chipped fingernails and blurted-out obscenities. Measure 1-1/2" dia x 1/8" thick, in steel, and hold a bunch of keys.

The package says these are “zipper pulls” and it could be right, but we know them as 1” dia steel split rings with 1” long spring clips that open to approx 3/16”. Our each is a pack of (18). Go pull a zipper, or make a bunch of key rings.

This fitted, hinged plastic box from American Tool Group would be worth buying even if it didnt come with hundreds of O-rings. And it does. Black nitrile O-rings sorted by size. O-rings that will stay in their places until you need them. The 407-piece set includes 32 sizes from 1/4" OD x 1/8" ID x 1/16" to 2-1/4" OD x 2" ID x 1/8". It includes the size you're going to need. At your fingertips. Instead of in aisle 12 at the home center.

No, O-rings. Get ’em here, because we got ’em. These black rubber (neoprene, we believe) O-rings are nominally 1-1/2” ID and 1/8” thick, and made in the USA. Use them for crafts, tiny ring toss games, in dioramas or dollhouses, as vibration pads, or in actual O-ring applications. Because, after all, they’re O-rings.

Get started with this package of toilet bolts which includes (2) 1/4" x 2-1/4" bolts with nuts and washers for securing the bowl to the floor. Finally, the tank bolt replacement set, for securing the toilet tank to the bowl, is a pair of 3" long x 5/16"-18 brass bolts, with nuts, rubber gaskets and brass washers.

This steel drawer slide measures 11-3/4" x 1-3/8" x 3/8" with a single draw, and has a 3-3/4" x 3-1/8" mounting plate that slides from one end to the other. For mounting on a single drawer, and rated for up to 30 lbs. Plate has (6) countersunk 7/32" mounting holes and the slide has (4) at 5/32".

These tiny stainless-steel, precision, linear rolling-motion slides from IKO--Nippon Thompson are designed for disk drives, measuring equipment, IC mfg, inspection devices, etc. They have a 7/8" x 5/8" x 1/4" plate mounted with (24) teeny bearings on a 2-3/8" x 9/32" x 3/16" slide with rubber stops 1-3/4” apart. Has a pair of 3/32" countersunk mounting holes on the slide, and (4) 1/16” holes on the plate with mating screws. Thousands of uses for model-makers, crafters, artists and window-dressers. Also: can you say kinetic jewelry?

O my. It's time to restock the O-ring cabinet. You'll get (36) total, (6) bags of (6) black rubber O-rings, all 1/8" thick. Each bag will have (2) 1-3/4" OD x 1-1/4" ID and (4) 3/4"OD x 1/2" ID. Made in the USA.