And it’s cute. Just 4-3/8" long with a pocket clip, it looks like a pen but it has (8) driver bits stored in the barrel. The 5/32” hex bits include slotted 1.5mm, 2mm, 3mm, 3.5mm, and  Phillips #00, #0, #1, and  #2 . We’ll pick one in red, black or blue, because who cares?

Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” bits. Measures 9” long over all with a flexible portion that’s 4-1/2” long and will bend 180 degrees.

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments include slotted, Phillips, square (Robertson) head, torx, hex and 12-point bits, plus security Phillips, torx and hex, and (4) different driver adapters (one of which, a super-cute cup-hook driver, has us oddly excited). They're all in a flip-top plastic case. How come it's surplus? If you turn it upside down and shake it, some of the bits fall out of their little size-marked slots. So don't do that. Or stick a thin sheet of foam inside it and all will be well.

How big are your locking pliers? This giant pair, in hardened steel, will grip the largest vices in captivity at 14” long with serrated 1-7/8” jaws that adjust from 11/16” to a gaping 2-1/4” ID. Tighten via an 11/16” bolt. Easy to locate, too, in a popsicle-ish lime green.

Long nose, like Cyrano. Unlike Cyrano, these pliers measure 6" long in nickel-plated steel with mostly serrated jaws and a cutting edge near the pivot, where it ought to be. Handles are dipped in rubber to help prevent electrocution.

We like these small pliers and cutters - they're a higher quality than most of the Chinese import tools we're offered. They are drop-forged, high-carbon steel with double-leaf springs, lap joints and rubberized foam handles. There is a trim 6" needle nose, and a 4-1/2" mini-round diagonal cutter. For precision work and hobbies, and especially nice for anyone with small hands.

Dead-center in the universe of tools you can’t have too many of, this 7-1/2" driver has (2) reversible heads, one with Phillips #1 and 3/16” flat, and the other with Phillips #2 and 1/4” flat, in chrome vanadium. Handle is 4-1/2” long and rubber-coated. Keep it in the kitchen junk drawer, where you can always find it.

This set of (8) high-torque chrome vanadium screwdrivers with magnetic tips will have you looking for screws to drive. And their attractive red and black rubber handles might have you just looking at them in the rare moments that you’re not actually using them. Tips include various slotted and Phillips sizes at 7-3/4”, 6-1/2” and 6-1/8” long, plus a stubby slotted and Phillips, each at a tad over 4” long.

This handy set is pretty much the answer to your socketing needs. The (40) pieces include a 3/8” reversible ratcheting handle; a 6” driver handle; (14) 1/4” metric sockets from 4mm to 13mm; (14) SAE 1/4” sockets from 5/32” to 9/16”, a 3/8" to 1/4" adapter, 1/4" SAE sockets at 1/4”, 5/16" and 3/8", a 21mm spark-plug socket, a 3” extension, 3/8" sockets at 15mm and 16mm, a color sleeve, and a case.

Dandy set of (5) double-ended ratcheting box wrenches with reverse levers. Measure from 4-1/2” to 8-1/4” long with sizes 7/32”, 9/32”, 5/16”, 1/4”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” and 3/4”. All in chromed carbon steel with a red plastic strip around the outside presumably to prevent scratches on chrome fittings.