HOBBY TOOLS

For bigger, or longer, projects, and hands-free operation. This 1/4-hp flex-shaft grinder has a 42" long (counting the chuck) flexible shaft, a keyed chuck that accepts bits up to 5/32", a variable-speed control foot-pedal power switch, and a comfortable 1" dia hand grip. The motor runs 500 to 22,000 rpm, operates on 120VAC, measures 3-1/4" dia x 4" long, and has a sturdy hook to hang it from an over-the-bench shelf. Intermittent duty. Over 25 grinding tool accessories included!

Top off this beautiful tool with our 227 piece accessory set. Click here

Teensy tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc. Think miniature bottle brushes. You get a set of (5) brushes: 1/32", 1/16", 3/32", 1/8" and 3/16" dia. All have nylon bristles, are 4" long, and are on a slip ring so you won't lose them.

This excellent 4-piece set of double-ended picks is made of nylon so you won't damage your electronics or electrocute yourself. They have hex-shaped shafts for a good grip, and assorted pick, probe, hook and scraper ends. Equally good for auto detailing or any place where you want to avoid scratching.

Prick tiny bits of gunk from nasty places with these U.S. made hardened stainless steel dental tools. But please don't use them for dental work. They are slight seconds, and some may have been re-worked which only matters to teeth. Trim excess glue from models, place a barrel on the deck of the ship-in-a-bottle, clean a rasp. If you need the strength and durability in a tiny pick, you need these tools. We have an assortment of the sort you've seen laid out on your dentist's tray. We'll pick (3) different ones for you.

This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serrated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.

A really cool mini drill set for your mini projects! The 7-1/4" long aluminum push drill for delicate work comes with (1) 1/16" and (1) 1/32" collet, and (20) bits that fit them. The bits are #61 through #80, some so needle-thin they could add tear ducts to a fashion doll. They come in a mini case marked with the number and size of each bit in mils.

Winner of this week's "What IS That?" award. It's a watch crab, also called a spanner wrench, that's designed to remove the back from watches, lenses from telescopes, and other thin, flat components from whatever they're attached to. Heavy for its size, it's 1" x 2-3/4" x 3/8" thick, with sharp 1/4" prongs projecting from the edge. The prongs move from 2" to 7/16" apart as you spin the knurled nut between them. An impressive tool to flash in front of your brother-in-law. If he doesn't read our catalog, he won't have a clue!

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.

Nice big, 60cc/2+ oz, polypropylene syringe is graduated in 5cc and 1/2 oz increments. Plunger has a black rubber gasket and a thumb ring at the top. Measures 6-1/2” long overall with a 1-7/16” x 5/32” ID nozzle with a cap. Handy in the shop, kitchen or craft room for gluing or decorating.

It's officially a watch-case holder, and indispensable for jewelers and watch collectors, but it's equally useful for holding anything small and squirrely while you work on it. A pair of 1-3/4" long x 15/16" tall brackets have (4) sets of (6) holes that take (4) movable posts. Spring-loaded jaws dial open to a max of 1".

If Verdi Had Been A Jeweler... The Anvil Chorus would have been much quieter. Play your own chorus on this excellent forged jeweler's anvil, which is much smaller than the ones in cartoons. In heavy polished steel, it measures approx 4-1/4” x 1-3/4” x 1-1/8” with a 2-1/4” x 1-1/4” flat working surface for chasing, bending corners and flattening wire to harden it, plus (1) round horn and (1) flat horn with a hole for riveting and beading. Essential for making flattened hook-and-eye clasps with craft wires. Also, a must for teeny-tiny blacksmiths.

Sometimes you don’t want lead in your solder. You know this. Our each is a dispenser that feeds approx 109” of lead-free solder in 0.04” dia wire. Solder is 99.3% tin and 0.7% copper. No need to thank us for refraining from lead soldier puns.

Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.

What do rotary tools have in common with fashionistas? Yes, it really is all about accessorizing. This set includes (20) shading bands, (10) fiberglass cut-off wheels, (21) assorted grinding stones, (3) polishing wheels, (45) woolen wheels and points, (36) silicone cut-off wheels, (60) sanding discs, (6) brushes, (5) diamond burrs, (8) high-speed steel burrs and drills, (3) mandrels and some polishing paste, all have a 1/8" shaft and come in a dandy wooden case. Case measures approximately 12-3/8" x 5-3/8" x 1-3/4". Check out our best selling rotary tool here.

You know how when you try to replace a watch band yourself and that little spring bar flies out and you can never find it in your retro shag carpeting? We’re here to help. First, get rid of that carpeting. Then get this set of multiple standard 1.5mm spring bars. You’ll get between 7 and 10 of each in a dozen sizes (100 pieces altogether) from 8mm to 19mm, plus a double-ended tool to help you swap them out in the first place.

Diamond files never wear out, hardly, unless you file diamonds with them. This 10-piece set of diamond files has an assortment of wedges, flats, points and triangle files, all 6” long overall and up 5/16” wide. If you can’t find the one you need here, you probably shouldn’t file the thing in the first place.

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.