BEST SELLERS

Teutonic Noise

This well-made plastic siren/whistle, a touch over 3/4" in diameter and a similar touch under 2" long, has a perforated metal disk that rotates in response to a silent blast from the perpetrator's lungs. This creates a high-pitched, loud and certainly distinctive siren-sound that picks up pitch in relation to the air velocity, sustains it as long as your wind holds out, and winds down quickly thereafter. A fine way to signal your arrival or departure. Probably not loud enough to collect the clan at the beach, but loud enough to get their attention in the classroom! The size makes it hard, but not impossible, to swallow, so please use care in teaching youngsters to sound like a miniature air raid siren.

accent

SIREN WHISTLE

Teutonic Noise

This well-made plastic siren/whistle, a touch over 3/4" in diameter and a similar touch under 2" long, has a perforated metal disk that rotates in response to a silent blast from the perpetrator's lungs. This creates a high-pitched, loud and certainly distinctive siren-sound that picks up pitch in relation to the air velocity, sustains it as long as your wind holds out, and winds down quickly thereafter. A fine way to signal your arrival or departure. Probably not loud enough to collect the clan at the beach, but loud enough to get their attention in the classroom! The size makes it hard, but not impossible, to swallow, so please use care in teaching youngsters to sound like a miniature air raid siren.

accent
$2.75 PKG (5)

CD Rackette

Called "Hang 10" (groan) by the manufacturer, it is a grey plastic rack that will hold (10) CDs hanging on... With screw holes and mounting tape you can hang it and its load most anywhere you please. The holder is 2-1/2" x 11", but loaded it probably needs at least a 4" x 12" space. Call it "handy", call it "clever", just don't call it "Hang 10". Okay?

accent

CD HANGING RACK

CD Rackette

Called "Hang 10" (groan) by the manufacturer, it is a grey plastic rack that will hold (10) CDs hanging on... With screw holes and mounting tape you can hang it and its load most anywhere you please. The holder is 2-1/2" x 11", but loaded it probably needs at least a 4" x 12" space. Call it "handy", call it "clever", just don't call it "Hang 10". Okay?

accent
$3.25 PKG (2)

Phone Fix

One too many jerks on your phone? Fix that loose connection with a new telephone cord. Our replacement set includes (1) 80" wall-to-phone line cord and a matching 16" coiled handset cord that extends to approx 6 feet, with modular plugs on both ends of both cords. The sets are forest green, white, taupe, light blue, dark blue, and whatever shows up next. Our choice, but we'll give you (4) sets in at least (2) different colors, at a price that will ring your bell.

accent

PHONE CORD SETS

Phone Fix

One too many jerks on your phone? Fix that loose connection with a new telephone cord. Our replacement set includes (1) 80" wall-to-phone line cord and a matching 16" coiled handset cord that extends to approx 6 feet, with modular plugs on both ends of both cords. The sets are forest green, white, taupe, light blue, dark blue, and whatever shows up next. Our choice, but we'll give you (4) sets in at least (2) different colors, at a price that will ring your bell.

accent
$3.95 PKG (4)

This One Hertz Our Ears

Our little solid-state buzzer is a diminutive 9/16" x 3/32" x 1-1/4" but it buzzes along at 8,000 hertz. Rated for 6VDC 20mA, but works fine with as little as 3V. Mounting brackets with holes on the back of the short sides, 4" wire leads. Lotta buzz for the buck.

accent

3 Volt DC Solid State Buzzer

This One Hertz Our Ears

Our little solid-state buzzer is a diminutive 9/16" x 3/32" x 1-1/4" but it buzzes along at 8,000 hertz. Rated for 6VDC 20mA, but works fine with as little as 3V. Mounting brackets with holes on the back of the short sides, 4" wire leads. Lotta buzz for the buck.

accent
$2.75 EACH

Restore Your Remote

Don't toss it and buy a universal remote. (How many things are really universal, after all?) Try this jar of Keypad Fix, designed to clean and restore conductivity to the carbon on the keys and the copper PC board pads that make up the rubber-coated switches on remotes, game controllers, and security keypads. Contains enough to coat over 200 button contacts.

accent

KEYPAD FIX

Restore Your Remote

Don't toss it and buy a universal remote. (How many things are really universal, after all?) Try this jar of Keypad Fix, designed to clean and restore conductivity to the carbon on the keys and the copper PC board pads that make up the rubber-coated switches on remotes, game controllers, and security keypads. Contains enough to coat over 200 button contacts.

accent
$4.95 EACH

Buzzing Transducer

This little (12mm dia x 8mm thick) transducer makes that ultra-annoying buzzing modem sound, because it's made for a modem. Apply a square wave signal in the 2200Hz range at approx 6V and it will buzzerate for you. Well, who wouldn't? Sound pressure level is about 85dB, 80 Ohm impedance. Housing is marked for polarity. Printed on the top is RDI-DMT-1206. Application notes are at www.microchip.com, reference AN655.

accent

TRANSDUCER

Buzzing Transducer

This little (12mm dia x 8mm thick) transducer makes that ultra-annoying buzzing modem sound, because it's made for a modem. Apply a square wave signal in the 2200Hz range at approx 6V and it will buzzerate for you. Well, who wouldn't? Sound pressure level is about 85dB, 80 Ohm impedance. Housing is marked for polarity. Printed on the top is RDI-DMT-1206. Application notes are at www.microchip.com, reference AN655.

accent
$3.50 PKG (4)

The 3 Phases

This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2" dia plastic sprocket on the side with the leads. The white lead feeds a Hall effect sensor, then ground, +5V control, and then the three coil leads  Samsung P/N 02914900.

accent

3-PHASE BRUSHLESS SERVO MOTOR

The 3 Phases

This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2" dia plastic sprocket on the side with the leads. The white lead feeds a Hall effect sensor, then ground, +5V control, and then the three coil leads  Samsung P/N 02914900.

accent
$2.75 EACH

Kiss The Cable Guy Goodbye!

Go digital without paying the cable guy. This refurbished digital amplified indoor antenna from RCA features a switchable inline amp with a 55dB boost and a pair of 7-draw dipoles (think: ears of a very large rabbit). Slick looking. Measures 8-3/8" tall x 4-5/8" x 4-1/8" before extension. The only cable you’ll ever need is the 6-foot coax from the unit to the TV.

accent

RCA DIGITAL INDOOR ANTENNA

Kiss The Cable Guy Goodbye!

Go digital without paying the cable guy. This refurbished digital amplified indoor antenna from RCA features a switchable inline amp with a 55dB boost and a pair of 7-draw dipoles (think: ears of a very large rabbit). Slick looking. Measures 8-3/8" tall x 4-5/8" x 4-1/8" before extension. The only cable you’ll ever need is the 6-foot coax from the unit to the TV.

accent
$19.85 EACH

Remote Without A Cause

Remake, recycle and reuse this repurposable Personal Response System remote. Made for answering test questions in college classrooms, this PRS TX-02 remote is now discontinued but full of lovely parts and waiting for a new electronic home. Inside you'll find a 940nm IR LED, a 12-digit touchpad, 2-C9015 PNP transistors, a red/orange/green LED, a 3.5795454 MHx crystal and a couple of ICs. As is, no guarantees. And let's keep it legal, OK?

accent

PERSONAL RESPONSE SYSTEM REMOTE

Remote Without A Cause

Remake, recycle and reuse this repurposable Personal Response System remote. Made for answering test questions in college classrooms, this PRS TX-02 remote is now discontinued but full of lovely parts and waiting for a new electronic home. Inside you'll find a 940nm IR LED, a 12-digit touchpad, 2-C9015 PNP transistors, a red/orange/green LED, a 3.5795454 MHx crystal and a couple of ICs. As is, no guarantees. And let's keep it legal, OK?

accent
$4.95 EACH

Good As Gold

The electroplated gold "F" connectors on this 18AWG 6-foot coax cable mean you're conducting things in the best possible way. High-def and quad shielded, too. The black RG6 audio/video cable, from Philips 150 series, is marketed for TV, DVD, CBL, SAT and modems.

accent

RG6 6-FT 18AWG GOLD-CONNECTOR COAX

Good As Gold

The electroplated gold "F" connectors on this 18AWG 6-foot coax cable mean you're conducting things in the best possible way. High-def and quad shielded, too. The black RG6 audio/video cable, from Philips 150 series, is marketed for TV, DVD, CBL, SAT and modems.

accent
$3.50 EACH

Elliptically Speaking

Nice little 3" x 5" oval (actually elliptical) 4 ohm speaker is rated for 5W with a 1/2" dia voice coil. Has (4) 7/32" mounting holes and measures 1-3/4" deep over all.

accent

OVAL SPEAKER

Elliptically Speaking

Nice little 3" x 5" oval (actually elliptical) 4 ohm speaker is rated for 5W with a 1/2" dia voice coil. Has (4) 7/32" mounting holes and measures 1-3/4" deep over all.

accent
$2.95 EACH

EMI Filter

This chassis-mounted in-line EMI filter from Schaffner (model #FN2020-3-06) accepts up to 3A at 110/250VAC. Unit measures 1-3/4" x 1-5/16" x 1-3/16" with (2) 3/16" mounting holes on side wings. Has 1/4" quick-disconnect terminals and has a wiring diagram on the housing. UL/CSA.

accent

SCHAFFNER 3AMP EMI FILTER

EMI Filter

This chassis-mounted in-line EMI filter from Schaffner (model #FN2020-3-06) accepts up to 3A at 110/250VAC. Unit measures 1-3/4" x 1-5/16" x 1-3/16" with (2) 3/16" mounting holes on side wings. Has 1/4" quick-disconnect terminals and has a wiring diagram on the housing. UL/CSA.

accent
$7.50 EACH

Air Flow Sensor

From Honeywell (part #AWM730B5), this medical airflow sensor is a takeout with a range from -300 to +300 SI/min. With a 5V activating current, will give an output between 0.5 and 4.5V responding in <10ms. Pins 1-4 are +15VDC in, ground, 5V in, and output. Unit measures 1-7/8" long x 13/16" dia, mounted on a 1-1/8" x 1-3/4" bracket. We'll include a spec sheet. Made in the USA.

accent

HONEYWELL AIR FLOW SENSOR AWM730B5

Air Flow Sensor

From Honeywell (part #AWM730B5), this medical airflow sensor is a takeout with a range from -300 to +300 SI/min. With a 5V activating current, will give an output between 0.5 and 4.5V responding in <10ms. Pins 1-4 are +15VDC in, ground, 5V in, and output. Unit measures 1-7/8" long x 13/16" dia, mounted on a 1-1/8" x 1-3/4" bracket. We'll include a spec sheet. Made in the USA.

accent
$24.50 EACH

Sliders

This DPDT slide switch has a couple of extra positions and is rated for 13A at 125VAC, 6A at 250VAC, and 0.5A at 125VDC. Measures 1-1/8" x 1/2" x 1/2" counting the (6) solder terminals on the bottom. The two middle positions are tied together.

accent

DPDT SLIDE SWITCH W/2 EXTRA POSITIONS

Sliders

This DPDT slide switch has a couple of extra positions and is rated for 13A at 125VAC, 6A at 250VAC, and 0.5A at 125VDC. Measures 1-1/8" x 1/2" x 1/2" counting the (6) solder terminals on the bottom. The two middle positions are tied together.

accent
$3.50 PKG (10)

Bitsy SPDT Switch

This SPDT slide switch is rated for 6A at 125VAC and 3A at 250VAC. Measures 3/4" long x 3/8" x 3/16" deep. Made in China for Defond. Part #CSJ-1206.

accent

SPDT DEFOND SLIDE SWITCH, 3A-6A

Bitsy SPDT Switch

This SPDT slide switch is rated for 6A at 125VAC and 3A at 250VAC. Measures 3/4" long x 3/8" x 3/16" deep. Made in China for Defond. Part #CSJ-1206.

accent
$3.50 PKG (10)

Air Flow Sensor

This 4" x 3-3/4" x 1-3/4" medical take-out air sensor has (3) ports coming off the main 3-1/8" x 3/4" ID chamber, (2) leading to one sensor and the other leading to a second one, then through circuitry on a mounted PC  board leading to a 10-pin output connector. Also has a PCB-mounted 3V coin cell battery. The sensors have input, output and trigger voltage and a voltage output, but we have no specs. Nice parts and pieces, though.

accent

HONEYWELL MULTI PORT AIR FLOW SENSOR

Air Flow Sensor

This 4" x 3-3/4" x 1-3/4" medical take-out air sensor has (3) ports coming off the main 3-1/8" x 3/4" ID chamber, (2) leading to one sensor and the other leading to a second one, then through circuitry on a mounted PC  board leading to a 10-pin output connector. Also has a PCB-mounted 3V coin cell battery. The sensors have input, output and trigger voltage and a voltage output, but we have no specs. Nice parts and pieces, though.

accent
$14.50 EACH

Piezo Pair

This PCB-mount piezo buzzer draws 1mA at 3VDC and measures 7/8" dia x 1/4" thick with (2) radial leads. Driver not included. Made in Japan by Projects Unlimited®. Model AT-20.

accent

7/8" DIA PIEZO BUZZER WITH 2 RADIAL LEADS

Piezo Pair

This PCB-mount piezo buzzer draws 1mA at 3VDC and measures 7/8" dia x 1/4" thick with (2) radial leads. Driver not included. Made in Japan by Projects Unlimited®. Model AT-20.

accent
$3.25 PKG (2)

Can You Hear Me Now?

This 4" 10W 8-Ohm speaker with a more-attractive-than-usual white metal grille with rounded corners was made for an intercom, we think. Has a 1-1/4" dia voice coil, ceramic magnet, and polyester cone. It's a squarish 4" that's 2-1/4" thick. Includes mounting hardware.

accent

4” WHITE-GRILLED INTERCOM SPEAKER

Can You Hear Me Now?

This 4" 10W 8-Ohm speaker with a more-attractive-than-usual white metal grille with rounded corners was made for an intercom, we think. Has a 1-1/4" dia voice coil, ceramic magnet, and polyester cone. It's a squarish 4" that's 2-1/4" thick. Includes mounting hardware.

accent
$8.50 EACH

Showing 127–144 of 214 results