Final Days Summer Sale! Our 600 Item Sale Ends Midnight Tuesday!

COMMUNICATIONS & ELECTRONICS

Itsy Bitsy Blower

This little black plastic fan and frame measures 2” square x 7/8” thick, and is a 12VDC 0.15 mA brushless model EFB0512HA. Has an air flow of 11.40cfm, and spins at 5500rpm. Able to operate from -10 to 70 degrees Celsius. Has a pair of 6” long red/black leads with a quick-disconnect.

accent

2” SQUARE 12VDC BRUSHLESS 5500 RPM FAN

Itsy Bitsy Blower

This little black plastic fan and frame measures 2” square x 7/8” thick, and is a 12VDC 0.15 mA brushless model EFB0512HA. Has an air flow of 11.40cfm, and spins at 5500rpm. Able to operate from -10 to 70 degrees Celsius. Has a pair of 6” long red/black leads with a quick-disconnect.

accent
$4.50 EACH

Have You Seen The Muffin Man?

Muffin fans, pay attention. You pick the "nice" 110 VAC 21W fan from Thermocool, measuring 4-3/4" square x 1-1/2" thick with an offset two-pin power connector, rated for 82-95 cfm and spinning at approx 2600 rpm, with five blades and 3/16" mounting holes at the corners (Mfr part # G12038HA1ST); or the "beastly" 110VAC 36W muffin fan from the same mfr, which blows up to 198 cfm at 2900 rpm and measures 6-3/4" x 6" tall x 2" thick with (2) power terminals on a removable shroud, 5 blades, 5/32" mounting holes on the corners plus a ground lug. Both UL.

accent

110VAC MUFFIN FAN, 198CFM, 36W, 6-3/4" SQ., 2900 RPM

Have You Seen The Muffin Man?

Muffin fans, pay attention. You pick the "nice" 110 VAC 21W fan from Thermocool, measuring 4-3/4" square x 1-1/2" thick with an offset two-pin power connector, rated for 82-95 cfm and spinning at approx 2600 rpm, with five blades and 3/16" mounting holes at the corners (Mfr part # G12038HA1ST); or the "beastly" 110VAC 36W muffin fan from the same mfr, which blows up to 198 cfm at 2900 rpm and measures 6-3/4" x 6" tall x 2" thick with (2) power terminals on a removable shroud, 5 blades, 5/32" mounting holes on the corners plus a ground lug. Both UL.

accent

WE HAVE SO MANY FANS

And even more fan blades. Choose a white-plastic 5-blade or a black-plastic 4-blade, each approx 4" across with a 3/16" bore. Designed for clockwise rotation. No motor. Just blades. (But nice little blades.)

accent

BLACK FAN BLADE

WE HAVE SO MANY FANS

And even more fan blades. Choose a white-plastic 5-blade or a black-plastic 4-blade, each approx 4" across with a 3/16" bore. Designed for clockwise rotation. No motor. Just blades. (But nice little blades.)

accent
$1.25 EACH

Motor Mit Piston Pump

This 12VDC low-pressure, piston-driven, diaphragm air pump has a 7/32" inlet. Motor draws 100mA no load, stalls at approx 4.3A, spins approx 3500 rpm and measures 4" x 1-5/8" x 3" with 10" leads. Shaft has a 1/2" dia cam to drive the piston. Motor is Mabuchi RK-555PH.

accent

MOTOR AND AIR PUMP

Motor Mit Piston Pump

This 12VDC low-pressure, piston-driven, diaphragm air pump has a 7/32" inlet. Motor draws 100mA no load, stalls at approx 4.3A, spins approx 3500 rpm and measures 4" x 1-5/8" x 3" with 10" leads. Shaft has a 1/2" dia cam to drive the piston. Motor is Mabuchi RK-555PH.

accent
$9.50 EACH

In-And-Out Burper

This little L-shaped low-pressure piston-and-diaphragm air pump has a 7/32" OD inlet and an 11/32” OD x 9/32” ID outlet, and is attached to a Mabuchi RK-555PH 12VDC motor that draws 100mA no load, stalls at 4.3A, and spins approx 3500 RPM. Measures 4" x 1-5/8" x 3" with 2” leads.

accent

12VDC MABUCHI AIR PUMP

In-And-Out Burper

This little L-shaped low-pressure piston-and-diaphragm air pump has a 7/32" OD inlet and an 11/32” OD x 9/32” ID outlet, and is attached to a Mabuchi RK-555PH 12VDC motor that draws 100mA no load, stalls at 4.3A, and spins approx 3500 RPM. Measures 4" x 1-5/8" x 3" with 2” leads.

accent
$9.50 EACH

Showing 1–5 of 5 results