GLASS BOTTLES & JARS

It looks as though it should be used for administering laudanum! A 30mL, 1-1/4" sq x 3" tall clear glass bottle, it has thick molded sides and a heavy lip: very antique in appearance. It is stoppered with a red(!) rubber stopper which is the squeeze bulb for the glass dropper tube inside. A real eye catcher, but give it a good wash please. It clearly is not sterile.

These nice clear glass jars hold 240ml (a tad more than 8 oz) and measure 4” tall x 2-1/4” square, with rounded corners and shoulders. Screw cap is a dark olive green. Opening ID is 1-3/4”. Line 'em up and put spices in them, is what we think. Also great for craft supplies like glitter, beads and rubber bands, and workshop essentials, like screws, nuts and washers.

Rejoice, we have finally found a source of reasonably priced borosilicate lab glassware. This is the kind of glass in the trade marked Pyrex(tm) and Kimax(tm) labware. The stuff you can put right over the flame of the Bunsen burner, or directly onto the hot plate. This stuff is imported from China, and is considered student grade, which is good enough for anything but the most exotic applications. We have beakers, test tubes, graduated cylinders and flasks. Compare the prices below and you will see that they are around half the U.S. equivalent. Call us for larger quantity prices.

Please Note: Physical sizes may vary slightly due to vendor and Mfg changes. Call or email for more info. 

In the lab or kitchen, these clear borosilicate glass mugs have a handle and lip and remind you that science is part of your every day. The smaller 4-1/2" 400mL one has graduations in 50mL increments and the larger 6" 1000mL one in 100mL increments with numeric markings every 100mL or 200mL accordingly; both with more room before you have to worry about spilling. May come with a pour spout on the side opposite the handle which won't affect your beverage consumption but will make it easier to water your favorite house plant. Not intended for serious lab use as the volumes are approximate. Remember to ask for 236.5ml of coffee the next time you visit your favorite diner.

Short and stubby, these 4-1/2 oz clear glass jars measure 2-1/8" tall x 2-5/8” dia tapering down to 2-3/8” at the bottom with white plastic gasketed screw caps. You’ll get (6) of them, and you’ll surely find uses for them. They’re right at home holding the stuff of craft rooms, offices, garages, workshops, man caves, she sheds and campers.

"Very interesting," our chief bottle washer said. This 3-1/16" tall x 1-7/16" dia corked glass bottle has a cream-colored rubber coating on the outside and a 15/32" ID mouth, with a little lip like an old-time baby bottle. The coating may make the bottle less likely to break if you drop it, It will certainly make it less likely to scatter shards of glass all over the floor! Holds approx 30ml (1 oz). Now with corks included and perfect for writing special messages on.

You pick small, medium or large borosilicate reagent bottles, all with ground glass stopper. Small is 60ml, 3-5/8" tall x 1-5/8" dia with a 7/8" long neck and a 1/2" ID mouth. Medium is 125ml, 4-3/4" tall x 2-1/8" dia with a 1" tall neck and an 11/16" ID mouth. Large is 250ml, 5-3/8" tall x 2-3/4" dia with a 1" long neck and a nearly 3/4" ID mouth. Made in India.

It looks like a jar for model paint, but it won't care what you put in it. In clear glass, it measures 2-3/4” tall x 1-7/8” dia, and holds just over (2) oz, with a black plastic screw cap. Got tiny amounts of things, like glitter, tiny beads or seeds? Well, here’s where you can store them.

No, these aren’t jars for olives. They’re that much rarer thing—jars made of olive-green glass. They’re opaque, and measure approx 2-1/4 dia x 2-1/4” tall with a round base morphing to a hexagon halfway up. Screw caps have silver-tone rims with a plastic olive insert. Jars hold approx (1) oz each, and you’ll get (3) of them.

These blue glass dropper bottles are the color of the cold cream bottles that everybody's mother used when everybody's mother used cold cream. Measure 3-1/8" tall x 1-15/16" dia and hold (1) oz. Plastic safety dropper cap is 2-3/8" tall and marked at 0.4 and 0.8ml.

OK, a jellyless jar, but you know what we mean. This one is clear glass, holds (8) oz of jelly or anything else, with a ribbed, white plastic screw cap. Stands 4” tall and tapers, as jelly jars will, from a 2-1/8” dia bottom to approx. 2-1/2” at the top.

We’ve never seen anything quite like these little clear glass vials, which means they must have myriad uses, particularly at this price. The large one is 1-3/4” tall x 15/16” dia with a shoulder and a 1/2” ID lipped mouth on the top, leading into a 1” deep conical cavity. The bottom has a 5/8” mouth, with an internal lip, and opens into a cavity around the little conical reservoir. So you can fill either end. Which would hold maybe a couple of ccs one way, or 1/4 oz the other way. The little one is the same, but is 1-9/16” tall x 5/8” dia and a1/4” ID mouth on top, 7/16” on the bottom. We’re thinking obscure lab experiments, or chimneys for streetlamps in model railroads. Or something.

From Bomex, this glass filtering flask is 500ml, stands 7" tall x 4-3/16" dia at the base, with a 1-1/16" dia mouth. The flask takes a #9 stopper and a 9mm OD outlet nipple.

A clear-glass, heat-resistant, volumetric flask with a ground glass neck and mating glass stoppers. These flasks are calibrated either at 500ml or 1000ml depending on which size you need. Both are around 12" tall. Not into lab work? Try it for techie salad dressings! Ain't surplus cool?

Our clear-glass brush bottles look empty, but that’s just because you can’t see the imaginary nail polish inside. They hold 5ml (1/5 teaspoon), and measure 1-1/4" x 3/4" oval x 1-1/4" tall with a screw cap that has a 3/16” wide brush attached. What do you use imaginary nail polish for? Painting imaginary fingernails. What do you use these bottles for? Craft, model, aromatherapy and DIY paint projects, among many others. Use your imagination.

Our clear glass vials come in 5ml, 10ml and 20ml sizes. You pick. The 5ml vials are 1-9/16" tall x 7/8" dia with 1/2" ID mouths; the 10ml vials are 2" tall x 15/16" dia with 1/2" ID mouths; and the 20ml vials are 2-3/8" tall x 1-1/8" dia with 1/2" ID mouths. All will take a #3 cork (our 88748), which is sold separately.

You never know you need a really sturdy, clear compact glass bottle until you actually need one. A lot of things are like that, but this bottle, which holds a little more than 4 oz, is one you might keep forever. And you’ll get (6) of them. Each measures 4-1/2" tall x just about 2”, and comes with a non-gasketed plastic screwcap. You might order a second set after you see how useful they are for art, craft, hobby, workshop and general storage purposes. Made in the USA.

You pick from our clear glass vial collection, all with gasketed black-plastic screw caps. When filled to the top, the small vials hold approx 4ml and measures 1-3/8” tall x 9/16” dia with a 9/32 (approx 7mm) ID and the larger vials hold approx 6ml and measure 2-1/4” tall x 19/32” dia with an 11/32” (7mm) ID. Very handy for small things, tiny stuff and a little dash of something.