What is a killer rare earth magnet? Well, once upon a time, a copywriter put this little magnet next to his computer monitor and got really pretty, wavy, aurora-like effects. And then got a new monitor! Don't try this at home. Our shiny, silver-colored 1" x 1" x 1/2" neodymium magnet looks innocent, but is industrial strength, pulling something like 25 lbs with enough strength left over to erase all your credit cards. And wreak havoc with your monitor.

Our each is a stack of (10) nickel-plated neodymium magnets. They measure 5/16” dia x 1/8” thick and have about 2 lbs of pull. We like them for light cabinet door latches or hanging your macaroni craft project very securely.

Donut magnet you can take to town!! 74mm dia x 14mm thick with a 30mm hole. Very strong and well pedigreed - in fact, its kin are activating pacemakers. They are of a high permeability ferrite material with a lovely light blue or white epoxy coating. Okay, we have them because there is the odd bubble, slight scratches or the word MAGNET painted in the coating which ruled them out of the medical ball, but they're fine company nonetheless. Good display bases, paper clip traps, and super for classroom demos.

Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.

Pick up this 1-3/4" x 7/8" x 3/8" ceramic pick-up magnet while we still have it. It's in a heavy metal housing and has a stationary metal hoop, about 1/2" i.d., on top. The manufacturer tells us the magnet will grab up to 5 lbs of metal, however Pat and Magnet Testing Team #3 have repeatedly lifted 10+ lbs, so it's very strong. Especially if you're going to dangle it on the end of a cord to gather spilled nails or to fish your keys out of the lake/pond/sewer/drain!

Voted most likely to attract by the judges, this magnet has the relative strength of 10 men. A shiny silver 1/2" cube of neodymium magnetism, it packs approx a 15-lb pull. If our boss Pat were that strong he could lift 2,160 lbs! Besides its superpower strength, this beautiful cube also would improve the looks of your fridge or bulletin board to no end.

Rare earth magnets are usually killers for their size, and these thick nickel neodymium discs are no exception. The price, on the other hand, for (3) 7/16" dia x 1/4" 5-lb lift or (2) 15/32” dia x 3/16” 8-lb lift magnets each stored on a 2" dia steel disc, is a rare exception.

Okay, it isn't the cheapest magnet in the warehouse - but we pulled about 35-40 pounds with this 4-7/8" x 1" x 3/4" ceramic magnet,  and we think it's a bargain. It has a 6" bracket with mounting holes on 5-1/2" centers, plus a 1/2" ID eyehook bolted into the center of it. It's all set to troll the bottom of the lake next time your filing cabinet falls overboard.

This plated N52 14,200 gauss neodymium magnet is shaped like a miniature silver ingot, measuring 1-1/2" long x 1/2" wide x 1/8-1/4" thick. Has a big hangonability quotient, which the manufacturer claims is 15 lbs of pull, meaning it's probably closer to 13 lbs. Impressive either way for such a cute little magnet. 

This plated rare-earth magnet is 15mm (0.59”) dia. x 10mm (0.39”) thick, and has a hefty 10-lb pull. Comes inside a white plastic cylinder with a lip, which you can keep or discard, not that you need us to tell you that.

The 5/32” bore in the center of this small plated neodymium magnet just makes it easier to mount. Measures 3/4" dia x 1/4" thick with a pull of approx 7 lbs. Works great with #6 or #8 flat head screws.

Add a door/drawer pull to any ferrous surface with this 1" dia x 1/4" thick neodymium disc in a polished sleeve with a 3/16" dia hole in a stand-off. Comes with a 1" slip-ring attached, and hangs on for 22 lbs worth. Plenty handy for hanging stuff from other stuff, too.

Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

We're liking this little plated N45 neodymium magnet because it will stand on end and stick out very prettily on the ice box. Measures 1" tall x 1/4" square with a hefty, for its size, 3-1/2 lb pull, 13,800 gauss. (Will also lie down on its side, of course, because everybody does.)

This is your chance to own a genuine cow magnet. Fed to cows by vets and farmers to attract the odd metallic parts of cows' diets (they tend to scarf up nails, staples and other stuff with the grass) and prevent bovine traumatic reticuloperitonitis, also known as hardware disease. Used for lots of magnetic lab experiments because they're so handy. In plated alnico, 3" long x 1/2" dia in a rounded tubular shape. Approx a 5-lb pull.

Just a big, smooth ceramic block magnet, 2" square x 1" thick with an affirmative 15-pound pull. You stick a note on the fridge with this puppy and you can be pretty sure it's going to be there when you get home. Even if you leave the windows open. Nice for grabbing loose screws on the workbench, too, but keep it away from your hard drive and the credit cards in your wallet.

Pair of alnico bar magnets, each 7/16" x 1/4" x 3". Magnetized end to end with the North pole marked, the North end painted red and the South pole painted blue. Come with a pair of keepers and a wood separator bar.

Yes, this grade C8 ceramic magnet is beastly--a monster, measuring 6" X 4" X 1" thick with a conservatively rated pull of 35 lbs, 3850 gauss. Powerful and, like all ceramic magnets, brittle, so keep it away from your laptop and don’t drop it or you may have several little beastly magnets. Use it to hold tools in the shop, or knives in the kitchen--or paint a bull’s eye on it and toss paper clips at it.