TOOLS/HARDWARE

Get The Hooks

Hang it all with this set of (10) magnetic hooks. The 1-3/16" long x 9/64" hooks screw into 1-3/8" dia magnetic bases with an approx 8-lb pull, which is lighter than most jackets and keys. Good for horizontal or vertical mounts, and dandy for adding hooks to gym or school lockers.

accent

MAGNETIC HOOKS 10 PIECE SET

Get The Hooks

Hang it all with this set of (10) magnetic hooks. The 1-3/16" long x 9/64" hooks screw into 1-3/8" dia magnetic bases with an approx 8-lb pull, which is lighter than most jackets and keys. Good for horizontal or vertical mounts, and dandy for adding hooks to gym or school lockers.

accent
$6.95 EACH

Stick 'Em Up

Now you can have a good, strong hook without drilling any holes. This plated magnetic hook sticks to any ferrous metal surface via a 2" dia alnico magnet with a 10-12 pound pull. Handy gadget to hold a tool, towel, broom or key ring (and if the ring is too heavy, consider throwing away the keys to your 1983 Chevy, and maybe a few more). The 3/4" long J-hooks have threaded ends and are removable. Our each is a package of (2).

accent

STRONG MAGNET HOOKS

Stick 'Em Up

Now you can have a good, strong hook without drilling any holes. This plated magnetic hook sticks to any ferrous metal surface via a 2" dia alnico magnet with a 10-12 pound pull. Handy gadget to hold a tool, towel, broom or key ring (and if the ring is too heavy, consider throwing away the keys to your 1983 Chevy, and maybe a few more). The 3/4" long J-hooks have threaded ends and are removable. Our each is a package of (2).

accent
$3.50 EACH

The Long & Longer Of It

These standard pegboard hooks fit, wait for it, standard pegboards, with 1” spacing on the legs, and made of 7/32” steel. Not really hooks, these are the long straight thingies with a slight upward angle to approx the last 3/4”. You pick the 3-1/2” long or the 5-1/2” long ones. Very handy in pantries, basements and garages. And isn't it time you finished that organizing project from last year? 

accent

HOOK, PEGBOARD, 3-1/2"

The Long & Longer Of It

These standard pegboard hooks fit, wait for it, standard pegboards, with 1” spacing on the legs, and made of 7/32” steel. Not really hooks, these are the long straight thingies with a slight upward angle to approx the last 3/4”. You pick the 3-1/2” long or the 5-1/2” long ones. Very handy in pantries, basements and garages. And isn't it time you finished that organizing project from last year? 

accent
$3.50 PKG (6)

Brass Hooks

Brass L-shaped shoulder hooks (Why aren’t they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total of (6) 1” hooks, or (4) 1–1/2” hooks.

accent

1-1/2" SHOULDER HOOKS

Brass Hooks

Brass L-shaped shoulder hooks (Why aren’t they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total of (6) 1” hooks, or (4) 1–1/2” hooks.

accent
$1.50 PKG (2)

Knobbies

1-7/8" dia. green, brown or orange hard plastic balls with a 1-1/4" ID x 1-1/2" deep hole on one side. Use them as slippery chair feet, as knobs on the ends of levers or tops of canes or even as protective caps for sharp pole ends. The tapered inner veins will provide a tight friction fit. You get an assortment of colors.

accent

KNOBBY CAPS

Knobbies

1-7/8" dia. green, brown or orange hard plastic balls with a 1-1/4" ID x 1-1/2" deep hole on one side. Use them as slippery chair feet, as knobs on the ends of levers or tops of canes or even as protective caps for sharp pole ends. The tapered inner veins will provide a tight friction fit. You get an assortment of colors.

accent
$2.00 PKG (8)

Snap & Swivel

A fatal yoga position? Crocodile moves? Nope, just a shiny steel snap hook, 3-1/2" long with a 3/8" ID, attached to a 3/4” ID swivel, the better to hook your keys on whatever you hook your keys on.

accent

3-1/2” SWIVELING SNAP HOOK

Snap & Swivel

A fatal yoga position? Crocodile moves? Nope, just a shiny steel snap hook, 3-1/2" long with a 3/8" ID, attached to a 3/4” ID swivel, the better to hook your keys on whatever you hook your keys on.

accent
$3.50 PKG (4)

VERSATILE GROMMET

A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that forms a flange over one face and lines about 3/4" of the length of the 1/4" dia bore. Use it as a grommet, a shock mount, or both. With  a brass wire hanger that is set under the insert flange and extends 1" to the side. The hanger is bent to hold a 1/4" dia wire.

accent

GROMMET W/ HANGER

VERSATILE GROMMET

A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that forms a flange over one face and lines about 3/4" of the length of the 1/4" dia bore. Use it as a grommet, a shock mount, or both. With  a brass wire hanger that is set under the insert flange and extends 1" to the side. The hanger is bent to hold a 1/4" dia wire.

accent
$2.00 PKG (20)

Vegetable Hook

Large plastic hook, pointed on one end, blunt on the other. We have no idea what it was made for. Some suggest a meat hook in a pet food factory, which the shape supports. But the red or white plastic suggests not. Maybe it is for veggies? A loyal reader is convinced that it goes over a door and bananas are hung from it. Sounds good to us. The blunt end is shaped to hang over a square beam, 1-1/4" or so thick. The other pointy end, when the hook is so hung, will be 3" from the beam top, and will point out 3" and up @ about 15°. The whole is made of 3/8" dia plastic rod. You figure out what to do with it.

accent

PLASTIC HOOK

Vegetable Hook

Large plastic hook, pointed on one end, blunt on the other. We have no idea what it was made for. Some suggest a meat hook in a pet food factory, which the shape supports. But the red or white plastic suggests not. Maybe it is for veggies? A loyal reader is convinced that it goes over a door and bananas are hung from it. Sounds good to us. The blunt end is shaped to hang over a square beam, 1-1/4" or so thick. The other pointy end, when the hook is so hung, will be 3" from the beam top, and will point out 3" and up @ about 15°. The whole is made of 3/8" dia plastic rod. You figure out what to do with it.

accent
$2.50 PKG (10)

Pentagonish Plastic Thingies

In big quantities. And dirt cheap. The dark brown plastic, 1-11/16" squares with one corner cut off at a 45° angle are approx 1/16" thick, with a raised center square, a 9/16" hole in the center, and peel-off really-self-adhesive backing. For art projects, air vents for snake cages, wall plates for cable runs, or something. Please.

accent

SQUARE-ISH BASE

Pentagonish Plastic Thingies

In big quantities. And dirt cheap. The dark brown plastic, 1-11/16" squares with one corner cut off at a 45° angle are approx 1/16" thick, with a raised center square, a 9/16" hole in the center, and peel-off really-self-adhesive backing. For art projects, air vents for snake cages, wall plates for cable runs, or something. Please.

accent
$1.95 PKG (20)

We Zinc Zis Is A Bargain

This zinc-plated carbon steel clevis grab hook is rated Grade 43 with a 2,600-lb load limit (that's about a Mini Cooper hatchback). Measures 3" long x 1-7/8" at the wide part x 1/2" at the thick part, with a 3/8" axle held with a cotter pin. Clearance from hood to axle is also 3/8".

accent

CLEVIS GRAB HOOK

We Zinc Zis Is A Bargain

This zinc-plated carbon steel clevis grab hook is rated Grade 43 with a 2,600-lb load limit (that's about a Mini Cooper hatchback). Measures 3" long x 1-7/8" at the wide part x 1/2" at the thick part, with a 3/8" axle held with a cotter pin. Clearance from hood to axle is also 3/8".

accent
$2.95 EACH

We Hate Unmounted Placards!

These black steel placard mounts are perfect for restaurant specials, place cards, or more permanent signage. Two very tight 1" tall clips are mounted on an approx 2" x 11/16" base with good'n'sticky self-adhesive foam on the bottom. Also drilled with (2) small holes if you want to nail or screw through the foam.

accent

PLACARD MOUNTS

We Hate Unmounted Placards!

These black steel placard mounts are perfect for restaurant specials, place cards, or more permanent signage. Two very tight 1" tall clips are mounted on an approx 2" x 11/16" base with good'n'sticky self-adhesive foam on the bottom. Also drilled with (2) small holes if you want to nail or screw through the foam.

accent
$3.95 PKG (10)

Get The Hook

This one will do, particularly if you’re hanging up something substantial, and you need a hook that looks sort of like a question mark. Brass-plated steel, 4-3/4” long with a 1” ID and made from 3/8” stock. The last 2-1/4” have a 3/8-16 thread waiting for a nut you could find in any hardware store.

accent

BRASS-PLATED THREADED STEEL HOOK

Get The Hook

This one will do, particularly if you’re hanging up something substantial, and you need a hook that looks sort of like a question mark. Brass-plated steel, 4-3/4” long with a 1” ID and made from 3/8” stock. The last 2-1/4” have a 3/8-16 thread waiting for a nut you could find in any hardware store.

accent
$3.50 PKG (4)

Bringing In The Sheaves

Pulleys? You need pulleys? Step right up and pick from our selection of single-sheave zinc-plated steel pulleys, mounted on swivel hooks with the axles held in by a cotter pin for easier rigging. We’ve got 2” dia pulleys for ropes up to 3/8” dia with a 480-lb max load, mounted to a 2” x 5/8” ID swivel hook; 2-1/2” dia pulleys for ropes up to 3/8” dia with a 550-lb max load, mounted to a 2-1/2” x 3/4” ID swivel hook; 3” dia pulleys for ropes up to 1/2” dia with a 650-lb max load, mounted to a 2-1/2” x 3/4” ID swivel hook.

accent

2-1/2” STEEL PULLEY

Bringing In The Sheaves

Pulleys? You need pulleys? Step right up and pick from our selection of single-sheave zinc-plated steel pulleys, mounted on swivel hooks with the axles held in by a cotter pin for easier rigging. We’ve got 2” dia pulleys for ropes up to 3/8” dia with a 480-lb max load, mounted to a 2” x 5/8” ID swivel hook; 2-1/2” dia pulleys for ropes up to 3/8” dia with a 550-lb max load, mounted to a 2-1/2” x 3/4” ID swivel hook; 3” dia pulleys for ropes up to 1/2” dia with a 650-lb max load, mounted to a 2-1/2” x 3/4” ID swivel hook.

accent
$8.75 EACH

It’s Time To Hang It Up

That flat-screen TV you paid a fortune for has been sitting on a coffee table long enough. Time to wall-mount it like all the television sets on television shows. You pick: the full-motion mount fits standard LED wall mounts, holds sets from 23” to 50" and up to 44 lbs, can pull away from the wall up to 13-1/2”, tilts 5-15 degrees, and swivels 90 degrees right or left; the flat-to-the-wall mount holds 32” to 50” sets up to 132 lbs, and will sit a smidgen over 1/2” from the wall.

accent

TV FLAT-TO-WALL MOUNT

It’s Time To Hang It Up

That flat-screen TV you paid a fortune for has been sitting on a coffee table long enough. Time to wall-mount it like all the television sets on television shows. You pick: the full-motion mount fits standard LED wall mounts, holds sets from 23” to 50" and up to 44 lbs, can pull away from the wall up to 13-1/2”, tilts 5-15 degrees, and swivels 90 degrees right or left; the flat-to-the-wall mount holds 32” to 50” sets up to 132 lbs, and will sit a smidgen over 1/2” from the wall.

accent
$14.50 EACH

Showing 1–14 of 14 results