BEST SELLERS

What's a backwards light socket? A socket light. This vanadium steel socket adapter for 1/2" and 3/8" drives has a bright white LED that shines through your sockets, so you never have to ask someone to hold the flashlight. Runs on (3) AG-13 batteries, included along with a spare set of (3) more. 

Jarvis Says: Don’t even try the “TRY ME” invitation on the package because the (3) AG-13 batteries in the piece are dead. Good news is, we’re sending you (3) brand new ones. You might have to blow out some gunk from the battery compartment, but that’s a small task for such a cool piece. Instructions included for changing them with a screwdriver and a pen. That's surplus, folks! That's surplus!

A really small guy who lives....Whoops! Wrong Chuck. This one is a drill or rotary tool chuck with a 1/8" shank and fits bit sizes #60-#80 to facilitate handling tools with truly small shanks. Very handy in the modeling and electronics worlds.

We have to say, we’d love to see someone make a Red Fusion movie, or a Red Fusion soft drink. Until then, we’ll keep on loving this red Fusion Pro silicone tape. It’s water-retardant, self-fusing, 1” wide x 10 feet long. The pros use it for repairs and insulation because it stretches, sticks to itself and keeps water out—three things you often want in a roll of tape. The red color is just a bonus.

Silent movie star—came to a bad end. Also this 38-piece stubby handled driver and bit set in an easy-to-tote case. Forward, reverse and lock settings. Includes 3mm, 4mm, 4.5mm, 5mm, 6mm, 7mm slotted; #0, #1(2), #2(2), #3(2) Phillips; #0, #1(2), #2(2), #3(2) Pozi; T8, T10, T15, T20, T25, T30, T35, T40 torx; 3mm, 4mm, 5mm, 6mm hex; and #0, #1, #2, #3 square. Whole shebang in a 3.5" x 6.5"x 1.25" case. Get ratcheting.

It's officially a watch-case holder, and indispensable for jewelers and watch collectors, but it's equally useful for holding anything small and squirrely while you work on it. A pair of 1-3/4" long x 15/16" tall brackets have (4) sets of (6) holes that take (4) movable posts. Spring-loaded jaws dial open to a max of 1".

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

This nicely made 13-piece file set has a dozen diamond-encrusted files at 2, 4 and 6mm wide x 1-3/16” long with 120, 180, 300, and 400 grit surfaces. Includes a colleted 4-3/4” long aluminum handle, Go rub something the right way.

The secret is ceramics. This newly redesigned 5-1/2" long precision cutter has a ceramic point that's as sharp as an X-actly knife, stays sharp 11x longer than steel, never rusts, is non-conductive, non-magnetic, non-sparking, chemically inert and is easier to maneuver in intricate cutting patterns. Cuts paper, card stock and more easily while being finger-friendly. Pencil-style ambidextrous durable nylon handle with a textured anti-slip grip and no-roll oval design has a cap and now features a replaceable blade. A boon for crafters, and a blessing for junior crafters.

Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” bits. Measures 9” long over all with a flexible portion that’s 4-1/2” long and will bend 180 degrees.

A 2-1/2" x 1-5/8" plastic-framed mirror swivels on a ball-joint mount at the end of telescoping handle that stores at 8" long and extends to 31". The contoured rubber-coated handle makes those double-shift inspection days a little easier.

How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.

Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.

Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

Safety is as safety does these days, and we recommend these high-quality, safety goggles, unvented for maximum splatter protection and ANSI Z87.1-rated. Measure 6” wide x 3-5/8” tall x 3-1/8” deep. The black elastic strap is adjustable, and the flexible sides and top allow for a better seal against the face. One size fits most adults, and Pat, the boss around here, slipped them over his glasses, no problem. Goggles are sealed in a bag and the vendor says sterile if un-opened, which is good since you just washed your hands. We’ve seen them selling for $9-plus in the Ama-zone. Our price is better, right? Our bulk pricing makes them great for the workplace or schools.

Possibly the most stylin’ tape measure we’ve ever had. The plastic case is approx 3” x 3”, and comes in assorted bright colors like red, green and yellow, but we won’t make you choose. We got it—we’re good at this type of thing. Inside is a rolled up 16-foot classic yellow metal tape with an end grab. Has a locking button on the side, a locking switch on top, a wrist strap and a belt clip. Go ahead, show up at a club or art gallery with a tape measure on your wrist. You always did want to start a trend

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

Now you can have a good, strong hook without drilling any holes. This plated magnetic hook sticks to any ferrous metal surface via a 2" dia alnico magnet with a 10-12 pound pull. Handy gadget to hold a tool, towel, broom or key ring (and if the ring is too heavy, consider throwing away the keys to your 1983 Chevy, and maybe a few more). The 3/4" long J-hooks have threaded ends and are removable. Our each is a package of (2).

Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.