..my sweet engravable you. Safeguard your stuff with this little battery-powered engraving pen. The 1/16” dia head vibrates to let you inscribe your ID on stuff  that might otherwise wander off. Surprisingly effective for a lightweight tool. Measures approx 6” long x 1” dia and works on metal, wood, glass, plastic, leather and more. Runs on (2) included “AA” batteries.

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

Teensy tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc. Think miniature bottle brushes. You get a set of (5) brushes: 1/32", 1/16", 3/32", 1/8" and 3/16" dia. All have nylon bristles, are 4" long, and are on a slip ring so you won't lose them.

This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serrated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.

Prick tiny bits of gunk from nasty places with these U.S. made hardened stainless steel dental tools. But please don't use them for dental work. They are slight seconds, and some may have been re-worked which only matters to teeth. Trim excess glue from models, place a barrel on the deck of the ship-in-a-bottle, clean a rasp. If you need the strength and durability in a tiny pick, you need these tools. We have an assortment of the sort you've seen laid out on your dentist's tray. We'll pick (3) different ones for you.

And we do mean micro. Sizes #61 to #80 (yes, that is twenty different bits) which are from 0.013 to 0.038 inches diameter!! The big boys sell a set of similar bits (carbon steel, like ours) for about $30.00!! Maybe theirs aren't from China.

Winner of this week's "What IS That?" award. It's a watch crab, also called a spanner wrench, that's designed to remove the back from watches, lenses from telescopes, and other thin, flat components from whatever they're attached to. Heavy for its size, it's 1" x 2-3/4" x 3/8" thick, with sharp 1/4" prongs projecting from the edge. The prongs move from 2" to 7/16" apart as you spin the knurled nut between them. An impressive tool to flash in front of your brother-in-law. If he doesn't read our catalog, he won't have a clue!

If your beads need reaming, nothing reams beads like diamond-coated bead reamers. This quartet includes a 5" tapered tip, 3-1/2" conical tip, a 3-1/2" cylinder with a conical tip and a 4" pointed tip, all with color-coded plastic handles, and all ready to meet your most sophisticated bead-reaming needs.

Refillable butane torch, with a 1/2" dia x 5-3/4" body and a 1/4" dia. x 2-1/4" long head. Strong enough to melt solder, silver and gold solder, glass tubing and such metals as gold, silver, copper, tin, and aluminum. Equally handy around the hobby shop, jewelry bench, or lab. Refills from standard butane lighter canister.

Sometimes you don’t want lead in your solder. You know this. Our each is a dispenser that feeds approx 109” of lead-free solder in 0.04” dia wire. Solder is 99.3” tin and 0.7% copper. No need to thank us for refraining from lead soldier puns.

It's officially a watch-case holder, and indispensable for jewelers and watch collectors, but it's equally useful for holding anything small and squirrely while you work on it. A pair of 1-3/4" long x 15/16" tall brackets have (4) sets of (6) holes that take (4) movable posts. Spring-loaded jaws dial open to a max of 1".

When you need to drill itsy-bitsy teeny-weeny little-bitty small holes, break out this 20-piece set of wire-gauge drills in diameters from .012" to .037". No, they won't work in a standard collet, but we'll send a micro-chuck with a 1/8" shank along with the drill set. We think of everything!

What do rotary tools have in common with fashionistas? Yes, it really is all about accessorizing. This set includes (20) shading bands, (10) fiberglass cut-off wheels, (21) assorted grinding stones, (3) polishing wheels, (45) woolen wheels and points, (36) silicone cut-off wheels, (60) sanding discs, (6) brushes, (5) diamond burrs, (8) high-speed steel burrs and drills, (3) mandrels and some polishing paste, all have a 1/8" shaft and come in a dandy wooden case. Case measures approximately 12-3/8" x 5-3/8" x 1-3/4". Check out our best selling rotary tool here.

For bigger, or longer, projects, and hands-free operation. This 1/4-hp flex-shaft grinder has a 42" long (counting the chuck) flexible shaft, a keyed chuck that accepts bits up to 5/32", a variable-speed control foot-pedal power switch, and a comfortable 1" dia hand grip. The motor runs 500 to 22,000 rpm, operates on 120VAC, measures 3-1/4" dia x 4" long, and has a sturdy hook to hang it from an over-the-bench shelf. Intermittent duty. Over 25 grinding tool accessories included!

Top off this beautiful tool with our 227 piece accessory set. Click here

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.

In translucent polypropylene, these measure 6” long with a bulbous top, 2mm dropper point and 0.5ml markings. The package calls these “Prospector’s Choice” and suggests using them to “collect fine gold particles with ease.” Feel free, but we like them for labs and crafts--anywhere that dropper dispensing occurs. Our each is a package of (50). Great for labs, crafts and hobbies.

Sounds like an Olympic figure-skating move, the standing, self-closing reverse tweezer, but it's really a tweezer that's closed until you squeeze it. It also has a frame to hold it up off a work surface, so it doubles as a vice. Ours have wooden grips and measure 6-3/8" long with 2-7/8" serrated jaws and a 2" x 1-1/2" stand.  

A great hand held rotary tool and an excellent buy. The plastic carrying case at 12" x 8-1/2" x 3-1/2" contains not only the 120VAC-powered variable speed (8,000-30,000 rpm) mini drill/grinder, but a 3-ft flexible extension shaft that allows you to operate in even the tightest spots and a good assortment of bits, grinding stones, cut-off wheels, etc, including collets to fit 1/8" and 1/16" bits. A nice package, and a very nice gift for yourself, or for anyone who enjoys working with hobby tools. UL listed, just like the big boys. Check out all our rotary tools and accessories.