SCREWDRIVERS, PLIERS & WRENCHES

Might As Well Be Magic

Yes, there’s a scientific explanation, but we prefer to think this magnetizing/demagnetizing tool relies on magic. Stick a screwdriver head in the bottom, it’s magnetized. Stick it in the top, it’s demagnetized. Fun for the whole family. Measures 2” square x 1-1/4” with stair-step ports for blades of different sizes. Never drop a screw again.

accent

MAGNETIZING-DEMAGNETIZING TOOL

Might As Well Be Magic

Yes, there’s a scientific explanation, but we prefer to think this magnetizing/demagnetizing tool relies on magic. Stick a screwdriver head in the bottom, it’s magnetized. Stick it in the top, it’s demagnetized. Fun for the whole family. Measures 2” square x 1-1/4” with stair-step ports for blades of different sizes. Never drop a screw again.

accent
$3.35 EACH
$3.95
-15%

Need To Screw Around?

Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” bits. Measures 9” long over all with a flexible portion that’s 4-1/2” long and will bend 180 degrees.

accent

180-DEGREE FLEXIBLE EXTENSION DRIVER SHAFT

Need To Screw Around?

Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” bits. Measures 9” long over all with a flexible portion that’s 4-1/2” long and will bend 180 degrees.

accent
$6.75 EACH

Pinnochio Pliers

These high-quality 8” long nickel-plated pliers from Tolsen Tools have an extra long nose, even when they’re telling the truth, and, as you know, pliers never lie. The 3” long jaws finish with a 1/2” gripper section and another side-cutter section. Also have coated plastic handles.

accent

8” LONG-NOSE PLIERS

Pinnochio Pliers

These high-quality 8” long nickel-plated pliers from Tolsen Tools have an extra long nose, even when they’re telling the truth, and, as you know, pliers never lie. The 3” long jaws finish with a 1/2” gripper section and another side-cutter section. Also have coated plastic handles.

accent
$8.70 EACH

Tamper With The Tamperproof

This 34-piece set of chrome vanadium bits includes 1/4" hex bits with (8) security Torx from T8 to T40; (3) Pozi from PZ1 to PZ3; (2) Phillips at PH1 & PH2; (6) security Hex from H2 to H6; (4) Tri-wing from Y1 to Y4; (4) spanner head from U4 to U10; (3) Torq from S6 to S10; and a 6mm slotted bit. All are 3” long. Includes (2) mag-demag blocks, and a storage case.

accent

34-PIECE TAMPER-PROOF BIT SET

Tamper With The Tamperproof

This 34-piece set of chrome vanadium bits includes 1/4" hex bits with (8) security Torx from T8 to T40; (3) Pozi from PZ1 to PZ3; (2) Phillips at PH1 & PH2; (6) security Hex from H2 to H6; (4) Tri-wing from Y1 to Y4; (4) spanner head from U4 to U10; (3) Torq from S6 to S10; and a 6mm slotted bit. All are 3” long. Includes (2) mag-demag blocks, and a storage case.

accent
$14.95 EACH

Attach Anything!

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments include slotted, Phillips, square (Robertson) head, torx, hex and 12-point bits, plus security Phillips, torx and hex, and (4) different driver adapters (one of which, a super-cute cup-hook driver, has us oddly excited). They're all in a flip-top plastic case. How come it's surplus? If you turn it upside down and shake it, some of the bits fall out of their little size-marked slots. So don't do that. Or stick a thin sheet of foam inside it and all will be well.

accent

100-PIECE SECURITY BIT SET

Attach Anything!

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments include slotted, Phillips, square (Robertson) head, torx, hex and 12-point bits, plus security Phillips, torx and hex, and (4) different driver adapters (one of which, a super-cute cup-hook driver, has us oddly excited). They're all in a flip-top plastic case. How come it's surplus? If you turn it upside down and shake it, some of the bits fall out of their little size-marked slots. So don't do that. Or stick a thin sheet of foam inside it and all will be well.

accent
$13.75 EACH

What’s The Combination?

For these pliers--known at lineman’s pliers, TLs or combination pliers--the combination is a blunt nose, flat serrated gripper, rounded gripper and cutting jaws, in that order. Ours is a quality tool from Tolsen Tools, 8” long in nickel-plated steel with plastic-coated handles.

accent

NICKEL-PLATED LINEMAN’S PLIERS

What’s The Combination?

For these pliers--known at lineman’s pliers, TLs or combination pliers--the combination is a blunt nose, flat serrated gripper, rounded gripper and cutting jaws, in that order. Ours is a quality tool from Tolsen Tools, 8” long in nickel-plated steel with plastic-coated handles.

accent
$6.75 EACH

Hobby Tools

We like these small pliers and cutters - they're a higher quality than most of the Chinese import tools we're offered. They are drop-forged, high-carbon steel with double-leaf springs, lap joints and rubberized foam handles. There is a trim 6" needle nose, and a 4-1/2" mini-round diagonal cutter. For precision work and hobbies, and especially nice for anyone with small hands.

accent

HOBBY SIZED DIAGONAL CUTTER

Hobby Tools

We like these small pliers and cutters - they're a higher quality than most of the Chinese import tools we're offered. They are drop-forged, high-carbon steel with double-leaf springs, lap joints and rubberized foam handles. There is a trim 6" needle nose, and a 4-1/2" mini-round diagonal cutter. For precision work and hobbies, and especially nice for anyone with small hands.

accent

Sockets-R-Us

This handy set is pretty much the answer to your socketing needs. The (40) pieces include a 3/8” reversible ratcheting handle; a 6” driver handle; (14) 1/4” metric sockets from 4mm to 13mm; (14) SAE 1/4” sockets from 5/32” to 9/16”, a 3/8" to 1/4" adapter, 1/4" SAE sockets at 1/4”, 5/16" and 3/8", a 21mm spark-plug socket, a 3” extension, 3/8" sockets at 15mm and 16mm, a color sleeve, and a case.

accent

40-PIECE SOCKET SET

Sockets-R-Us

This handy set is pretty much the answer to your socketing needs. The (40) pieces include a 3/8” reversible ratcheting handle; a 6” driver handle; (14) 1/4” metric sockets from 4mm to 13mm; (14) SAE 1/4” sockets from 5/32” to 9/16”, a 3/8" to 1/4" adapter, 1/4" SAE sockets at 1/4”, 5/16" and 3/8", a 21mm spark-plug socket, a 3” extension, 3/8" sockets at 15mm and 16mm, a color sleeve, and a case.

accent
$9.95 EACH

Calipering Wrench

First of all, this adjustable wrench has a super-handy 0-3/4” x 1/16” rule that functions as an outside caliper on one side, with a 0-25mm x 1mm version on the other. And it’s an 8" drop-forged steel adjustable wrench that opens to a maximum of 1-1/16”. It’s a handy tool, to be sure.

accent

8” STEEL ADJUSTABLE WRENCH-CALIPER

Calipering Wrench

First of all, this adjustable wrench has a super-handy 0-3/4” x 1/16” rule that functions as an outside caliper on one side, with a 0-25mm x 1mm version on the other. And it’s an 8" drop-forged steel adjustable wrench that opens to a maximum of 1-1/16”. It’s a handy tool, to be sure.

accent
$9.95 EACH

Locking PLIERS

How big are your locking pliers? This giant pair, in hardened steel, will grip the largest vices in captivity at 14” long with serrated 1-7/8” jaws that adjust from 11/16” to a gaping 2-1/4” ID. Tighten via an 11/16” bolt. Easy to locate, too, in a popsicle-ish lime green.

accent

EXTRA LARGE LOCKING PLIERS

Locking PLIERS

How big are your locking pliers? This giant pair, in hardened steel, will grip the largest vices in captivity at 14” long with serrated 1-7/8” jaws that adjust from 11/16” to a gaping 2-1/4” ID. Tighten via an 11/16” bolt. Easy to locate, too, in a popsicle-ish lime green.

accent
$26.65 EACH

Standard Four-Headed Driver

Dead-center in the universe of tools you can’t have too many of, this 7-1/2" driver has (2) reversible heads, one with Phillips #1 and 3/16” flat, and the other with Phillips #2 and 1/4” flat, in chrome vanadium. Handle is 4-1/2” long and rubber-coated. Keep it in the kitchen junk drawer, where you can always find it.

accent

FOUR-HEAD SCREWDRIVER

Standard Four-Headed Driver

Dead-center in the universe of tools you can’t have too many of, this 7-1/2" driver has (2) reversible heads, one with Phillips #1 and 3/16” flat, and the other with Phillips #2 and 1/4” flat, in chrome vanadium. Handle is 4-1/2” long and rubber-coated. Keep it in the kitchen junk drawer, where you can always find it.

accent
$3.75 EACH

Long-Distance Stars

For those can't-reach screws that you don't want anyone else to loosen. This 10-piece set of star security bits are 6" long and you get sizes T6, 7, 8, 9, 10, 15, 20, 25, 30 and 40 with 1/4" hex shafts to fit your standard electric drill.

accent

6" LONG STAR SECURITY BITS

Long-Distance Stars

For those can't-reach screws that you don't want anyone else to loosen. This 10-piece set of star security bits are 6" long and you get sizes T6, 7, 8, 9, 10, 15, 20, 25, 30 and 40 with 1/4" hex shafts to fit your standard electric drill.

accent
$8.75 EACH

These Are A Lock

Nice set of (3) locking pliers (called Mole grips in the UK, and you’re welcome) include a 5” pair that opens to 3/4”; 7” pair opening to 1-1/4”; and a 10” pair opening to 1-1/2”. All have quick-release levers and serrated jaws, and they’re rolled up in a fabric storage pouch.

accent

3 LOCKING PLIERS WITH POUCH

These Are A Lock

Nice set of (3) locking pliers (called Mole grips in the UK, and you’re welcome) include a 5” pair that opens to 3/4”; 7” pair opening to 1-1/4”; and a 10” pair opening to 1-1/2”. All have quick-release levers and serrated jaws, and they’re rolled up in a fabric storage pouch.

accent
$19.50 EACH

Totally Torquey

This set of (8) high-torque chrome vanadium screwdrivers with magnetic tips will have you looking for screws to drive. And their attractive red and black rubber handles might have you just looking at them in the rare moments that you’re not actually using them. Tips include various slotted and Phillips sizes at 7-3/4”, 6-1/2” and 6-1/8” long, plus a stubby slotted and Phillips, each at a tad over 4” long.

accent

8-PIECE CHROME VANADIUM SCREWDRIVER SET

Totally Torquey

This set of (8) high-torque chrome vanadium screwdrivers with magnetic tips will have you looking for screws to drive. And their attractive red and black rubber handles might have you just looking at them in the rare moments that you’re not actually using them. Tips include various slotted and Phillips sizes at 7-3/4”, 6-1/2” and 6-1/8” long, plus a stubby slotted and Phillips, each at a tad over 4” long.

accent
$9.95 EACH

Gentlemen, Fold Your Wrenches!

Is that a set of socket drivers in your pocket or did you just forget your toolbox? Imagine a set of (7) drivers mounted together and folding to a compact 4-3/8” x 2-1/8” x 1”. You pick the metric drivers at 5mm, 6mm, 8mm, 9mm, 10mm, 11mm and 12mm; or the SAE set at 3/16", 1/4", 5/16", 11/32, 3/8", 7/16" and 1/2".

accent

FOLDING SAE DRIVER TOOL SET

Gentlemen, Fold Your Wrenches!

Is that a set of socket drivers in your pocket or did you just forget your toolbox? Imagine a set of (7) drivers mounted together and folding to a compact 4-3/8” x 2-1/8” x 1”. You pick the metric drivers at 5mm, 6mm, 8mm, 9mm, 10mm, 11mm and 12mm; or the SAE set at 3/16", 1/4", 5/16", 11/32, 3/8", 7/16" and 1/2".

accent

Pliers de Bergerac

Can’t quite reach your work? Try these extra-long-nose, pliers, a full 11” long and heat-treated with padded grips. You pick the straight pliers with cutting blades, serrated tips and 2-3/4” long jaws; or the 45-degree bent-nose pliers with 3” jaws serrated from the bend to the end.

accent

PLIERS, 11-1/4" LONG NOSE W/CUTTER

Pliers de Bergerac

Can’t quite reach your work? Try these extra-long-nose, pliers, a full 11” long and heat-treated with padded grips. You pick the straight pliers with cutting blades, serrated tips and 2-3/4” long jaws; or the 45-degree bent-nose pliers with 3” jaws serrated from the bend to the end.

accent
img
IZOOM LED LIGHT 8-IN-1 MULTITOOL
NEW

Octotool

The 8-in-1 screwdriver/flashlight combo from iZoom® features un-lose-able drivers. Includes slotted 1/8", 3/16", 1/4", Phillips #0, #1, #2, plus mini-slotted and Phillips, all on hinges at the bottom of the light. Swing them up and they snap in place with the light as a handle. The light/handle has (6) cool-white LEDs shining at 100 lumens. The whole shebang measures 5” long x 1-3/4” dia.

accent

IZOOM LED LIGHT 8-IN-1 MULTITOOL

Octotool

The 8-in-1 screwdriver/flashlight combo from iZoom® features un-lose-able drivers. Includes slotted 1/8", 3/16", 1/4", Phillips #0, #1, #2, plus mini-slotted and Phillips, all on hinges at the bottom of the light. Swing them up and they snap in place with the light as a handle. The light/handle has (6) cool-white LEDs shining at 100 lumens. The whole shebang measures 5” long x 1-3/4” dia.

accent
$6.75 EACH

Backwards Light Socket

What's a backwards light socket? A socket light. This vanadium steel socket adapter for 1/2" and 3/8" drives has a bright white LED that shines through your sockets, so you never have to ask someone to hold the flashlight. Runs on (3) AG-13 batteries, included along with a spare set of (3) more.

accent

VANADIUM STEEL LED SOCKET ADAPTER

Backwards Light Socket

What's a backwards light socket? A socket light. This vanadium steel socket adapter for 1/2" and 3/8" drives has a bright white LED that shines through your sockets, so you never have to ask someone to hold the flashlight. Runs on (3) AG-13 batteries, included along with a spare set of (3) more.

accent
$4.95 EACH

Showing 1–18 of 30 results