The boys in the back room called this IZoom Pro™ flashlight ludicrously bright, and they’re usually right. Rated at 300, 1200, and 2500 lumens with a strobe setting, light is through a reticular COB LED element with an adjustable focus lens. Takes (6) “AA” batteries, and they’re included. Measures 7” long x 1-1/2” dia in black aluminum alloy body. Has up to a 4-hour life, depending on the beam strength you use.

This 16-piece set of watchmaker's tools are just as handy for jewelry-makers, crafters, or anyone else working with small parts. The professional watch-repair kit Includes (2) tiny Phillips-head screwdrivers, (3) diminutive flat-heads, a case knife, non-magnetic tweezers, case wrench, metal/plastic watch hammer, link-pin remover, double-head pin pusher, (3) pin-punches, small needle-nose pliers, and a watchband holding block. Just changing bands and batteries? Get these tools to make it a lot easier, and order a brand-new pack of 30 popular-size button batteries-(6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13.

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

Call it a gonzo version of our best work-light, this 4-5/8" x 2-1/4" x 1" cigarette-pack-size light has (60) white LEDs in a 3" x 1-1/2" window with a bright mode and a way brighter mode that would blind a turkey vulture, plus (4) more for a standard flashlight mode. Includes a flip-out easel, hook and a disc magnet. Comes with (3) "AAA"s. Manufacturer rates this bad boy at 900 lumens. 

Electronics. The best thing that ever happened to calipers. Save your eyesight and measure accurate outside and inside dimensions with this digital instrument. Powered by an included button-cell battery, it measures up to 6 inches in .001 increments or 155 millimeters in .01 increments. Hardened stainless steel, 9-1/4" x 3" OA, with a locking vernier, it comes with a nice sturdy storage case and extra battery.

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments include slotted, Phillips, square (Robertson) head, torx, hex and 12-point bits, plus security Phillips, torx and hex, and (4) different driver adapters (one of which, a super-cute cup-hook driver, has us oddly excited). They're all in a flip-top plastic case. How come it's surplus? If you turn it upside down and shake it, some of the bits fall out of their little size-marked slots. So don't do that. Or stick a thin sheet of foam inside it and all will be well.

Trying to cut back on hobby expenditures? This incredibly priced utility knife set is x-actly what you need. Standard interchangeable blades and holders, the largest of which has an easy-grip, screwdriver-type handle. Everything is lined up in a fitted plastic box with extra blades magnetically anchored. The 13–piece set has (3) holders, plus assorted blades. The 48–piece set has (7) holders, a wide assortment of blades, (1) tube of glue, and (1) sharpening stone. Very nicely priced. Very sharp.

And then give us a little tweeze, and a couple more for luck. Our 4-piece stainless steel tweezer set includes: 4-5/8" long bent tweezers; 4-1/2” fine point; 4-5/8” cross-locks; and 4-1/4” blunt-tip stamp tweezers with 1/4” wide tips for you philatelists.

Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.

No gas or electricity needed for this pocket-sized manual chain saw, the camper's pal. It's 30" long overall, with (82) spring-steel teeth on the 18-1/2" middle section, and canvas loop handles on each end. Imagine a sharpened bike chain with a handle at each end. It's easy to use (we tested it), works a whole lot faster than a hatchet, rolls up into no space at all, and stores in the heavy-duty canvas belt pouch that comes with it.

Hook these on the zipper pulls on your jackets and you'll never be in the dark again. Tiny LED lights measure 1" x 9/16" in a 5/16" thick oblong, and come on a 7/8" long lanyard clip. We'll pick some that will go with your eyes, in blue, green, black or red. Include little button cell batteries that can be replaced if you're the sort of person who does that.

A really cool mini drill set for your mini projects! The 7-1/4" long aluminum push drill for delicate work comes with (1) 1/16" and (1) 1/32" collet, and (20) bits that fit them. The bits are #61 through #80, some so needle-thin they could add tear ducts to a fashion doll. They come in a mini case marked with the number and size of each bit in mils.

Refillable butane torch, with a 1/2" dia x 5-3/4" body and a 1/4" dia. x 2-1/4" long head. Strong enough to melt solder, silver and gold solder, glass tubing and such metals as gold, silver, copper, tin, and aluminum. Equally handy around the hobby shop, jewelry bench, or lab. Refills from standard butane lighter canister.

"Screeeeeek! Screeeeeek! Screeeeeek!" Recognize that? It's the sound of someone sawing a styro-foamal block. It's followed by the sound of a vacuum sucking up hundreds of little foam shards. Free yourself from both with this clever electric hot-knife that slides through those chunks of craft foam like a straight razor through a ripe mango. Perfect for carving foam blocks into shapes - or smaller blocks. Measures 10" long OA with a 4-3/4" long, needle-like cutting wand, heats up to 410°F (so be careful), and makes screeeek-free and shardless cuts. Has a 7-foot cord, line switch, safety stand, and wall-outlet adapter.

Diamond point bits that, if used by your dentist would send you through the roof. The assortment of bits includes cylinders, cones (points), balls and a couple of special shapes all in a variety of sizes.  This set of (10), each has a 1/8" dia. shank and is about 1-3/4" long OA, with larger size bit heads. Both come in plastic cases. A craftsperson's delight!!

What a cool little clamp! Only 8" long overall, the jaws open to 4" when you press the release button and close incrementally as you pull the trigger. The 3/4" x 7/8" pads on the metal-and-plastic tool won't mar the surfaces they're sandwiching. Makes you want to find something to clamp!

Our super soldering set comes with a 25W soldering iron with a 5/32" dia tip, approx (5) feet of de-soldering braid, de-soldering pump, iron holder and (5) feet of lead-free solder. A must have for any budding electronics kit builder.