Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.

You buy as much cord as you like and make your own extension cords with these male and female electrical connectors. Also use them to replace damaged plugs or sockets. Rated for 15A at 125V, type B. Use with 14AWG wire or thicker. Connectors are 2-5/8" long x 1-1/2" dia at their thickest, with strain reliefs on both at the cable sides.

Neatness definitely counts. Even in wiring. Especially in wiring. End those electrical mare's nests with this 6-position barrier strip, rated for up to 30A at 600V. Comes with a clear plastic cover with access to the screw terminals and measures 3-5/8" x 1-1/4" x 5/8" with a 5/16" mounting hole at each end. Terminals are in pairs.

Just plug this set of 2-contact flat molded connectors into each other. (Each one has both a male and a female port.) Yes, they're on opposite ends of 10" long red and black, 18-2 AWG leads, but that's just a device to keep them together. When you're ready to hook them up, just clip those leads and get each end wired. You'll get a pack of (2) complete sets, perfect for hobbyists, tinkerers, and electronic DIYers.

This is a panel-mount 3-prong grounded electrical plug rated for 15A at 125V, and we're thinking compressor applications. Has a 2" dia face with a 1-3/16" sq x 7/8" housing behind it, quick disconnect terminals and a ground screw, plus a pair of 2-3/4" mounting wings. Just plug your grounded extension cord into it. UL.

An easy way to light up the kids' eyes! Teach them to wire a simple circuit with our basic components.

The knife switches are mounted on a plastic bases.

The miniature plastic socket holds a standard flashlight bulb with a 14 mm dia screw base.

We pack 6 volt and 3 volt round bulbs, or 1.5 volt bell-shaped bulbs, (5) to a package.(Bulbs are rated slightly higher to prevent them from burning out.)

Hook up the black plastic and metal 2" x 4-1/4" telegraph key with brass contacts and (2) terminal posts with nuts.

Our blue-plastic holder for (1) "D" battery has a small tab at each end to hook a lead to, and a 1/8" square mounting hole at each corner.

You add the mounting surface and the know-how. Actual bulb voltage listed in parenthesis.

This heavy-duty plastic line connector from Mennekes® has a boot and is rated for 32A at 200-250VAC. It's 2-phase with a ground lug through set-screw terminals (ID just under 5mm). The (2) AC plugs are 6mm dia and the ground plug below it is 8mm. Adjustable. 19mm wide strain relief 52mm up from the terminal plate. Made in Germany. UL. Sorry, no mating connector.