who's got the button? You do, which means you don't have to go the drugstore when your watch, calculator, camera, radio or nearly anything else stops. Be prepared for electronic quitters with this 30-pack of button cell batteries in the most popular sizes. Our each is (6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13 batteries. (Some devices may call these G1, G2, etc., or have other arcane codes for these same sizes.) Brand new!

Knowledge is power - in this case, battery power. You'll know from the easy-to-read gauge on this black-plastic handheld mini-tester whether a battery is good, low or needs to be replaced. The 4-1/4" x 2-3/8" x 1" tester reads "AAA," "AA," "C," "D," 9 volt, 1.5 volt button, and other sizes.

When you run out, you have to run out and buy more. Stay home with this pack of (24) "AA" and (12) "AAA" alkaline batteries from Polaroid. Box says they're good until 2021.

These super handy little tweezer-style battery testers are made for checking button-cell and 3V lithium coin-cell batteries, but they've got a wide enough spread for everything from "AAA"s to D-cells (but not 9-volts!). Red and black arms designate the +/- sides, and an LED at the base lights up if the battery is good.

So you like Nickel-Metal Hydride rechargeable battery bargains? You choose a 4-pack of "AA" 2600 MAH or "AAA" 1000 MAH NiMH batteries, the recommended choice for electronics, cameras, games, cordless phones and toys.

Nice little battery holder made to contain (4) “AA” cells. Measures 2-1/2" x 2-3/4" x 3/4" with a pair of 5-1/2" leads and an SPST slide switch. The cover closes with screws so all those AAs won’t go flying around where you can’t find them if you drop it. Great for science fairs.

Can you plug in a banana? You can when you have a pair of 34” black and red leads with banana clips on one end. And these have alligator clips on the other end, so you can also plug in your reptiles, too.

The pentapack: You pick a pack of (5) 3V lithium coin cell batteries, CR2025 OR CR2032, still in their packaging, for a price that looks like a single battery, because you're smart enough to shop here. Looking for a large quantity? Try our bulk pack of (20) batteries for huge savings!

This power supply is made for COB LED boards, and provides constant current up to 1750mA from 10-28VDC. Features 0-10V voltage control dimming, thermistor feedback, and a separate 5-12V 2W output for a cooling fan. Has full pinout on the case. Works perfectly as a driver for COB LED lighting boards. Like these. Click! Measures 5-5/8" x 3" x 1-3/8". RoHS compliant. UL.

Generic batteries that stand up to the big boys! These are very good alkaline batteries, and they seem to last just as long as the name brands when tested against them. Our each is a pack of (1), (2) or (4), depending upon the cell size.

Here's a brand new selection of sealed lead-acid rechargeable batteries, for when you're pushing something a little bigger than a penlight. All batteries are all direct from the manufacturer with current date codes. All of them have (2) 3/16" wide quick-disconnect terminals on top. Click on battery description for a photo.

Our each is (4) of the blue plastic "D" Cell modular battery holders, approx 3-3/8" x 1-7/16" x 1-1/8" deep without tabs. They slide together either side-to-side or end-to-end or any combination of both, with connecting tabs in both directions. Can be wired parallel or in series. Open tops. Interesting possibilities.

Nice, new 6-volt lantern batteries from Ultralast®, labeled for the international market. Standard 2-5/8" square x 3-3/16" high, standard spring tabs on top. Advanced Heavy-Duty the label says. We'll price it to save you a world of dollars, pesos and francs, Pat says.

This submersible 12VDC water pump is rated for 360gph flow, and up to a 6-foot lift. Draws approx 1A at full power. Input is 13mm ID/17mm OD with a slight lip. Housing measures 1-11/16” square x 2-1/2” on a 3” x 1-5/8” plate with a pair of 5/16” mounting holes and 7-1/2” leads. Also available is the compatible 12VDC 1.5A power supply with a 12+ foot cord with an inline toggle switch approx two feet off the 5.5mm (2.3mm) center-positive female plug. UL.

You know all those A.S.&S. catalog items that call for AG13 or AG10 button-cell batteries? We’ve got ya covered. Our each is a package of (10) or (100), for the bulk minder shoppers, of 1.5 volt AG13s (AKA A76s, LR44s, V13Gas, and RW82s) or AG10's (AKA 389, 390, 189, L1130, LR1130, L1131) No need to thank us, we're just doing our job.

These in-line battery holders, from we know not where, have a pair of Duracell® AAAs with 1-1/2” leads and a 4mm polarized Molex connector. The positive lead is soldered to (1) battery, not the holder (but easily removable to use the batteries alone), and the whole shebang measures 3-3/4” long x 1/2” square. You’ll get (3) shebangs, all of ’em made in USA.

We have a number of battery holders, constantly changing in detail. They may be plastic, they may be metal. They all have either simple short wire leads or connection points. In all cases, they hold a number of batteries and connect them internally in series. The table shows the number and type of batteries held, the final voltage, material, lead type and price.

These single “AA” battery holders, with springs, are in black plastic with pins ready to be mounted directly to a printed circuit board. Also have small mounting holes at each end.