A handy space-saver, this 6-outlet tap expands a double outlet (with grounded plugs) to take (6) grounded plugs. In off-white plastic, it measures 4-3/4" x 3-1/8" x 1-1/4" thick, with the outlets on the long sides. The plugs run in the same direction, along the long axis. Can also be flush-mounted if you remove the existing wall plate, since it will take a long screw (not included) through to the outlet threads. Rated for a maximum of 15A. Great for behind furniture, TVs, etc. UL.

This standard American polarized wall tap outlet allows you to control the flow of juice, up to 125Vac @15 Amps max. Measures 1-1/2" high x 3-1/4" long x 1-1/4" deep, not counting 2-prongs. Great for appliances and devices that draw power even when not in use. Great for Christmas lights and other string lighting, allows you to turn on and off without umplugging. Has a backlit amber on/off rocker switch on the side. UL, CSA, ETL.

Converts (1) grounded outlet to (3) outlets, oriented so that the plugs you add run along the wall, not perpendicular to it. In dark green, with a 15A maximum. Indoor use only. UL.

Take care of them all with this grounded and surge-protected wall tap with (6) outlets plus (2) USB ports--and everybody needs USB ports. Converts a standard double outlet to an 8-way source that will support up to 15 Amps. USB puts out 2.1 Amps. Measures 5-5/8" x 3-1/2" x 1-5/8" in a light gray/beige color. ETL listed. Even includes the center screw (most don't) to anchor it to the wall plate so it wont pull out!

Our oval (3)-outlet extension cord is 16-gauge and 6 feet long with an outlet housing that measures 4-1/2" x 3-1/2". Outer body is made of a soft, bendable material, which makes it easy to wrap around things and hide. You need the juice, not the eyesore. And you can always use an extra extension cord. Has a (2)-prong plug and (2)-prong outlets.

No funny business here folks. Just the facts. Ivory colored standard medium base 2-outlet socket adapter. Turns any medium base outlet into a 2 prong socket for plugging stuff in. It's also a pass--through for the bulb. From General Electric. 660Watt/120VAC max receptacles and 250Watt/120VAC max socket. 

Call us dim bulbs and we won’t argue. We’ll just let you pick from our selection of dimmers. All of them are made for standard electrical boxes, and you'll need 1-3/8” back clearance. All are good with incandescents but not CFLs, and can be used with LEDs, but will then not fade to total black. All include wiring instructions, screws and wire nuts and are UL listed. The dual slide one is for (2) 120V fixtures up to 300W, and has a full-off switch at one end of the faders. The 700W slide dimmer for a light fixture has an SPST rocker switch and is OK for single or 3-way wiring, although multi-gang wiring will be lower wattage. 

Can't beat this price for (30) 2' Replacement T-8 tubes.  Under $1/each! You know the type. Double pin on both sides. Ours are 5000k, Approx. 1500 Lumens, 10W and are frosted to disperse the light. Wiring diagram on lamp shows how to retrofit them but do require a driver. Guess what...We have the drivers. Click here! One heck of a deal. Please Note: These need to be retro fit and cannot just be swapped out with existing lamps. See photos.

Please Note: Your entire order will ship standard ground when purchasing this item.

Contact us for expedited shipping information. Thanks!

Time was, these NEMA 10-20 female receptacles were standard for large air conditioners, and if you need one, we've got 'em. These are Hubbell brand, 3-screw terminal type with a pair of mounting holes on the sides. Rated for 10A at 250V and 15A at 125V.