Steel, These Rulers

Our each is a package of (2) steel tech rulers. One is 6” x 1/32” for the first 2-1/2” then 1/64” for the next 1/2” then 1/16” for the last 3”. The other is 150mm x 0.5mm. Both have sliding markers/pocket clips, and both have mm:inch tables on the reverse side. You’ll need excellent eyesight.

accent

6” STEEL TECH RULERS

Steel, These Rulers

Our each is a package of (2) steel tech rulers. One is 6” x 1/32” for the first 2-1/2” then 1/64” for the next 1/2” then 1/16” for the last 3”. The other is 150mm x 0.5mm. Both have sliding markers/pocket clips, and both have mm:inch tables on the reverse side. You’ll need excellent eyesight.

accent
$2.50 EACH
$2.95
-15%

Rechargeables Of The Light Brigade

Our “AA” rechargeable 2000mAH NiMH batteries (our each is a pair) are great for high-use devices like cameras, junior’s remote control cars, and lights that need to be on for a long time. Any campers out there?

accent

RECHARGEABLE AA NIMH BATTERIES

Rechargeables Of The Light Brigade

Our “AA” rechargeable 2000mAH NiMH batteries (our each is a pair) are great for high-use devices like cameras, junior’s remote control cars, and lights that need to be on for a long time. Any campers out there?

accent
$3.95 EACH

Move Your Butt

These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is non-standard, so treat it as a smooth shaft and mount pulley or gear with a setscrew. Measures 5-5/8" x 2-1/2" x 2-1/2" overall, not counting the shaft, and has power terminals opposite the gearbox with (2) 1/4" mounting holes opposite the shaft.

accent

CAR SEAT 12VDC GEAR MOTOR

Move Your Butt

These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is non-standard, so treat it as a smooth shaft and mount pulley or gear with a setscrew. Measures 5-5/8" x 2-1/2" x 2-1/2" overall, not counting the shaft, and has power terminals opposite the gearbox with (2) 1/4" mounting holes opposite the shaft.

accent
$13.50 EACH
$14.75
-8%

Fluid Pump

From ET Tech, this series 23 liquid micro-pump draws less than 300mA at 4-6VDC (5VDC nominal) with a liter-per-minute flow rate and up to a 3-foot lift. Not submersible, but suitable for hot-water apps and continuous duty. Measures 1" x 1" dia with a barbed 1/4" right-angle outlet and a 3/8" OD inlet on top. Great for fountains!

accent

4-6VDC MICRO PUMP

Fluid Pump

From ET Tech, this series 23 liquid micro-pump draws less than 300mA at 4-6VDC (5VDC nominal) with a liter-per-minute flow rate and up to a 3-foot lift. Not submersible, but suitable for hot-water apps and continuous duty. Measures 1" x 1" dia with a barbed 1/4" right-angle outlet and a 3/8" OD inlet on top. Great for fountains!

accent
$7.50 EACH

Clean Your Contacts

Works on all of them except the ones stuck to your eyeballs. Corrosion-Be-Gone is a gel made to remove the schmutz from all types of battery terminals, circuit boards and contacts, on everything from cars to computer boards. Our each is a 0.3 oz jar.

accent

BATTERY GOOP

Clean Your Contacts

Works on all of them except the ones stuck to your eyeballs. Corrosion-Be-Gone is a gel made to remove the schmutz from all types of battery terminals, circuit boards and contacts, on everything from cars to computer boards. Our each is a 0.3 oz jar.

accent
$4.95 EACH

Low Energy Motor

This little 1.5-3VDC motor draws just 15mA no load, which means it's just the ticket for solar-cell applications. At 3VDC it spins approx 600 rpm and stalls at 125mA. Measures 1-1/8" long x 15/16" dia with a 5/16" long x 1/16" dia shaft and 3-1/2" leads.

accent

1-1/2 - 3VDC MOTOR

Low Energy Motor

This little 1.5-3VDC motor draws just 15mA no load, which means it's just the ticket for solar-cell applications. At 3VDC it spins approx 600 rpm and stalls at 125mA. Measures 1-1/8" long x 15/16" dia with a 5/16" long x 1/16" dia shaft and 3-1/2" leads.

accent
$2.95 EACH

Tiny Toggle

This panel-mount SPST toggle switch is rated at 125VAC 6A or 250VAC 3A and is prewired with 24” leads. Comes with a mating switch-plate, lock washer and nut. Shaft is 5/32” and housing measures 1/2” x 5/16” x 3/8”.

accent

SMALL TOGGLE SWITCHES

Tiny Toggle

This panel-mount SPST toggle switch is rated at 125VAC 6A or 250VAC 3A and is prewired with 24” leads. Comes with a mating switch-plate, lock washer and nut. Shaft is 5/32” and housing measures 1/2” x 5/16” x 3/8”.

accent
$3.25 PKG (3)

Engineer's Fashion Accessory

No self-respecting number cruncher can afford to be seen without one of these fashion classics. We'll pick out (3) black or white vinyl pocket protectors in the traditional 5-1/2" x 3-1/2" size. Order quickly; It's only a question of time before these are seen on the runways in Milan.

accent

POCKET PROTECTORS

Engineer's Fashion Accessory

No self-respecting number cruncher can afford to be seen without one of these fashion classics. We'll pick out (3) black or white vinyl pocket protectors in the traditional 5-1/2" x 3-1/2" size. Order quickly; It's only a question of time before these are seen on the runways in Milan.

accent
$4.95 PKG (3)

Wheels Within Wheels

Nice little pulley unit kit includes (1) pulley each at 50, 30, 25 and 20mm and (3) pulleys at 11mm, plus myriad bushings, a 3VDC motor, (2) belts and a belt guide, base, mounts and assorted hardware. Includes graphic assembly instructions, plus a couple of rudimentary drawings with suggested projects. It's a mechanical science project waiting for a home.

accent

PULLEY KIT

Wheels Within Wheels

Nice little pulley unit kit includes (1) pulley each at 50, 30, 25 and 20mm and (3) pulleys at 11mm, plus myriad bushings, a 3VDC motor, (2) belts and a belt guide, base, mounts and assorted hardware. Includes graphic assembly instructions, plus a couple of rudimentary drawings with suggested projects. It's a mechanical science project waiting for a home.

accent
$12.95 EACH

Mabuchi Motor

This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a setscrew-mounted coupler that resembles a router bit. Has prewired leads. Mabuchi part no. RS-545SH.

accent

12VDC MABUCHI MOTOR

Mabuchi Motor

This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a setscrew-mounted coupler that resembles a router bit. Has prewired leads. Mabuchi part no. RS-545SH.

accent
$3.50 EACH

Wire Are You Guessing?

This 3-5/16” dia double-sided wire gauge wheel measures from 0-36 AWG on one face and from .005" to .325" on the other. It’s for non-ferrous metals, which is pretty much all of what you run across anyway, unless you’re Ferrous Bueller.

accent

DOUBLE-SIDED WIRE GAUGE

Wire Are You Guessing?

This 3-5/16” dia double-sided wire gauge wheel measures from 0-36 AWG on one face and from .005" to .325" on the other. It’s for non-ferrous metals, which is pretty much all of what you run across anyway, unless you’re Ferrous Bueller.

accent
$7.95 EACH

Shrink-To-Fit

Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.

accent

HEAT-SHRINK TUBES

Shrink-To-Fit

Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.

accent
$2.25 EACH

Gear Motor

Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty. Has a 3/4" long x 5/16" flattened shaft with a 4-5/8" dia x 5/16" wide (3/16" ID) single-sheave pulley attached, with a matching O-ring. The gearbox measures 2-3/4" x 3" x 9-1/16". The motor measures 1-1/16"dia x 1-5/8" long and comes with 7" leads and a 2-pin Molex connector.

accent

12-24VDC GEAR MOTOR W/PULLEY

Gear Motor

Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty. Has a 3/4" long x 5/16" flattened shaft with a 4-5/8" dia x 5/16" wide (3/16" ID) single-sheave pulley attached, with a matching O-ring. The gearbox measures 2-3/4" x 3" x 9-1/16". The motor measures 1-1/16"dia x 1-5/8" long and comes with 7" leads and a 2-pin Molex connector.

accent
$12.50 EACH
$14.75
-15%

You Say Breadboard…

The manufacturer, Elenco Electronics, says Bredblox, but what's in a name? This is just a nice little breadboard for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16" thick with (2) power busses up both long edges and (63) double rows of more busses. The holes for components and jumper wires are approx .050" each and multiple boards can be interlocked via tabs and ports on the long edges. Now go invent something and get rich.

accent

9830 BREADBOARD

You Say Breadboard…

The manufacturer, Elenco Electronics, says Bredblox, but what's in a name? This is just a nice little breadboard for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16" thick with (2) power busses up both long edges and (63) double rows of more busses. The holes for components and jumper wires are approx .050" each and multiple boards can be interlocked via tabs and ports on the long edges. Now go invent something and get rich.

accent
$8.50 EACH

Big Switches

These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut. There's also an internal 12V 3W replaceable indicator bulb. Needs 3" of rear clearance. You pick a red, green or yellow lens.

accent

GIANT RED LENS SWITCH

Big Switches

These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut. There's also an internal 12V 3W replaceable indicator bulb. Needs 3" of rear clearance. You pick a red, green or yellow lens.

accent

Block That Pillow!

Pardon us--just a little machinists’ joke. This sturdy cast-iron pillow block measures 5" x 2-3/8" tall x 1-3/8". Has a sealed 1-3/4" dia bearing with a 3/4" ID x 1-7/32" bushing and a pair of set screws. Mounts via 7/16" x 13/16" x 1/2" slots in the base. Has a 1/4” lube fitting with a cover. Get a couple and add a 3/4” dia steel rod, and you’ve got the toughest towel bar in the universe.

accent

3/4” DIAMETER SEALED PILLOW BLOCK

Block That Pillow!

Pardon us--just a little machinists’ joke. This sturdy cast-iron pillow block measures 5" x 2-3/8" tall x 1-3/8". Has a sealed 1-3/4" dia bearing with a 3/4" ID x 1-7/32" bushing and a pair of set screws. Mounts via 7/16" x 13/16" x 1/2" slots in the base. Has a 1/4” lube fitting with a cover. Get a couple and add a 3/4” dia steel rod, and you’ve got the toughest towel bar in the universe.

accent
$8.75 EACH

It's Your Nickel

So you like Nickel-Metal Hydride rechargeable battery bargains? You choose a 4-pack of "AA" 2600 MAH or "AAA" 1000 MAH NiMH batteries, the recommended choice for electronics, cameras, games, cordless phones and toys.

accent

"AA" NIHM RECHARGEABLE BATTERIES

It's Your Nickel

So you like Nickel-Metal Hydride rechargeable battery bargains? You choose a 4-pack of "AA" 2600 MAH or "AAA" 1000 MAH NiMH batteries, the recommended choice for electronics, cameras, games, cordless phones and toys.

accent

How About A Little Service?

This tiny servo motor can swing approx 90 degrees in either direction via any of the (3) included servo horns with screws on the 3/16" toothed shaft: a 13/16" long single horn, a 1-5/8" long double horn or the 1-5/8" long double horn with (2) smaller cross horns. Draws between 220 and 650mA at 5VDC, and is rated for 25 oz/in of torque. Measures 7/8" x 1/2" x 1-1/16" deep with a pair of mounting wings with 1/16" bores. Wiring is 5V to red, ground to brown and timing pulses to orange. Use any 1-2ms pulses at 50Hz.

accent

MINI SERVO MOTOR

How About A Little Service?

This tiny servo motor can swing approx 90 degrees in either direction via any of the (3) included servo horns with screws on the 3/16" toothed shaft: a 13/16" long single horn, a 1-5/8" long double horn or the 1-5/8" long double horn with (2) smaller cross horns. Draws between 220 and 650mA at 5VDC, and is rated for 25 oz/in of torque. Measures 7/8" x 1/2" x 1-1/16" deep with a pair of mounting wings with 1/16" bores. Wiring is 5V to red, ground to brown and timing pulses to orange. Use any 1-2ms pulses at 50Hz.

accent
$4.50 EACH

Showing 1–18 of 101 results