Over 200 Great Gifts On-Sale and Mustgo Sections All Week Long!

ELECTRONICALS

What’s Liquid, Crystal & Square

This 3.2" square LCD display from a new Epson® print replacement part has an SCI7500F0A MLS driver chip, and measures 3-1/2" x 2-5/8" with a 15-pin ribbon connector. Made in Japan because that’s where Epson’s from. “Epson” means “Son of Electronic Printer,” by the way. You think we’re kidding.

accent

EPSON® PRINTER LCD

What’s Liquid, Crystal & Square

This 3.2" square LCD display from a new Epson® print replacement part has an SCI7500F0A MLS driver chip, and measures 3-1/2" x 2-5/8" with a 15-pin ribbon connector. Made in Japan because that’s where Epson’s from. “Epson” means “Son of Electronic Printer,” by the way. You think we’re kidding.

accent
$2.75 PKG (2)

Feeling Punchy?

Wethinks this is some sort of pneumatic punch assembly. The cast aluminum body is a 3-3/4" x 2-3/4" x 1-3/4" block with a 1/4" dia spring-loaded punch, (2) rows of (6) 12VDC 500mA, 15psid solenoids sealed into the block with a printed circuit board, wiring harness and a 3/32” inlet barb. Whole shebang measures 4-3/8" x 3-3/4" x 3". Part# LHDX0512700BA.

accent

12VDC SOLENOID PUNCH ASSEMBLY

Feeling Punchy?

Wethinks this is some sort of pneumatic punch assembly. The cast aluminum body is a 3-3/4" x 2-3/4" x 1-3/4" block with a 1/4" dia spring-loaded punch, (2) rows of (6) 12VDC 500mA, 15psid solenoids sealed into the block with a printed circuit board, wiring harness and a 3/32” inlet barb. Whole shebang measures 4-3/8" x 3-3/4" x 3". Part# LHDX0512700BA.

accent
$14.50 EACH

PATCH CORD

And it’s a long ’un. This 85" long insulated CAT6 ethernet network patch cable from Commscope® has 8-pin connectors at each end. In a lovely blue, too.

accent

COMMSCOPE® CAT6 ETHERNET NETWORK PATCH CABLE

PATCH CORD

And it’s a long ’un. This 85" long insulated CAT6 ethernet network patch cable from Commscope® has 8-pin connectors at each end. In a lovely blue, too.

accent
$5.75 EACH

Thermistor On A Lead

This dipped, nominally 10K Ohm thermistor is on a heatshrunk and tubed 27” lead with a 6mm 2-pin Molex connector. Resistance drops as heat increases (NTC). AC takeout.

accent

10K OHM THERMISTOR

Thermistor On A Lead

This dipped, nominally 10K Ohm thermistor is on a heatshrunk and tubed 27” lead with a 6mm 2-pin Molex connector. Resistance drops as heat increases (NTC). AC takeout.

accent
$3.95 EACH

Buck The Force!

With this 1.2K OHM 10% tolerance power resistor. Rated 3 to 5 watts, it has a ceramic block body 3/8" sq x 1-1/2" long with wire leads on ends, one of which is 1/2" long and the other 1-1/2". Any questions?

accent

POWER RESISTOR, 1.2K OHM

Buck The Force!

With this 1.2K OHM 10% tolerance power resistor. Rated 3 to 5 watts, it has a ceramic block body 3/8" sq x 1-1/2" long with wire leads on ends, one of which is 1/2" long and the other 1-1/2". Any questions?

accent
$1.95 PKG (3)

Car-Phone 84, Where Are You?

Time was, these were sticking through the trunk of every 1984 Taurus on the planet. Now the car phone is mostly a memory, but you can own the antennas for a song. These are passive, 13" long with the bottom 2-1/2" in a coil and a ferrite choke halfway up. Base has a 5/32" - 24 thread.

accent

13” LONG COILED ANTENNA

Car-Phone 84, Where Are You?

Time was, these were sticking through the trunk of every 1984 Taurus on the planet. Now the car phone is mostly a memory, but you can own the antennas for a song. These are passive, 13" long with the bottom 2-1/2" in a coil and a ferrite choke halfway up. Base has a 5/32" - 24 thread.

accent
$3.95 PKG (2)

Capacitor Quartet

These 0.1uF ceramic capacitors have potted radial leads of stranded wire and are rated for up to 250V. Measuring 1-1/2" x 1/2", these are older-type capacitors and are probably more for point-to-point wiring, not PCB mounting.

accent

0.1UF 250V CAPACITORS

Capacitor Quartet

These 0.1uF ceramic capacitors have potted radial leads of stranded wire and are rated for up to 250V. Measuring 1-1/2" x 1/2", these are older-type capacitors and are probably more for point-to-point wiring, not PCB mounting.

accent
$3.25 PKG (4)

A Cling For Your Phone

Phone Slip-Sliding Away? Tell it to Paul Simon, then get this clear gel sticky pad, aka cling, at 5-1/2" x 3-1/4" x 1/16" thick. It’s super-tacky, heat-resistant, water-resistant, residue-free and will keep your phone on the dash or window where it belongs.

accent

STICKY PHONE PAD CLING

A Cling For Your Phone

Phone Slip-Sliding Away? Tell it to Paul Simon, then get this clear gel sticky pad, aka cling, at 5-1/2" x 3-1/4" x 1/16" thick. It’s super-tacky, heat-resistant, water-resistant, residue-free and will keep your phone on the dash or window where it belongs.

accent
$4.95 PKG (2)

EMI Filter

This chassis-mounted in-line EMI filter from Schaffner (model #FN2020-3-06) accepts up to 3A at 110/250VAC. Unit measures 1-3/4" x 1-5/16" x 1-3/16" with (2) 3/16" mounting holes on side wings. Has 1/4" quick-disconnect terminals and has a wiring diagram on the housing. UL/CSA.

accent

SCHAFFNER 3AMP EMI FILTER

EMI Filter

This chassis-mounted in-line EMI filter from Schaffner (model #FN2020-3-06) accepts up to 3A at 110/250VAC. Unit measures 1-3/4" x 1-5/16" x 1-3/16" with (2) 3/16" mounting holes on side wings. Has 1/4" quick-disconnect terminals and has a wiring diagram on the housing. UL/CSA.

accent
$7.50 EACH

Mabuchi Motor

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are 1/16” ID. Wired with 2” leads for super easy battery or wall adapter hook up. These were originally from copiers so you'll want to wipe 'em down before use.

accent

3-6VDC MABUCHI MOTOR

Mabuchi Motor

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are 1/16” ID. Wired with 2” leads for super easy battery or wall adapter hook up. These were originally from copiers so you'll want to wipe 'em down before use.

accent
$2.95 PKG (2)

Jumper

It’s a sweater in England, but here it’s a 4" double cord with a molded female 1/8” standard headphone jack at one end, and molded left-right (white-red) male RCA jacks on the other.

accent

JUMPER CABLES

Jumper

It’s a sweater in England, but here it’s a 4" double cord with a molded female 1/8” standard headphone jack at one end, and molded left-right (white-red) male RCA jacks on the other.

accent
$3.95 PKG (3)

Remote Without A Cause

Remake, recycle and reuse this repurposable Personal Response System remote. Made for answering test questions in college classrooms, this PRS TX-02 remote is now discontinued but full of lovely parts and waiting for a new electronic home. Inside you'll find a 940nm IR LED, a 12-digit touchpad, 2-C9015 PNP transistors, a red/orange/green LED, a 3.5795454 MHx crystal and a couple of ICs. As is, no guarantees. And let's keep it legal, OK?

accent

PERSONAL RESPONSE SYSTEM REMOTE

Remote Without A Cause

Remake, recycle and reuse this repurposable Personal Response System remote. Made for answering test questions in college classrooms, this PRS TX-02 remote is now discontinued but full of lovely parts and waiting for a new electronic home. Inside you'll find a 940nm IR LED, a 12-digit touchpad, 2-C9015 PNP transistors, a red/orange/green LED, a 3.5795454 MHx crystal and a couple of ICs. As is, no guarantees. And let's keep it legal, OK?

accent
$4.95 EACH

Air Flow Sensor

This 4" x 3-3/4" x 1-3/4" medical take-out air sensor has (3) ports coming off the main 3-1/8" x 3/4" ID chamber, (2) leading to one sensor and the other leading to a second one, then through circuitry on a mounted PC  board leading to a 10-pin output connector. Also has a PCB-mounted 3V coin cell battery. The sensors have input, output and trigger voltage and a voltage output, but we have no specs. Nice parts and pieces, though.

accent

HONEYWELL MULTI PORT AIR FLOW SENSOR

Air Flow Sensor

This 4" x 3-3/4" x 1-3/4" medical take-out air sensor has (3) ports coming off the main 3-1/8" x 3/4" ID chamber, (2) leading to one sensor and the other leading to a second one, then through circuitry on a mounted PC  board leading to a 10-pin output connector. Also has a PCB-mounted 3V coin cell battery. The sensors have input, output and trigger voltage and a voltage output, but we have no specs. Nice parts and pieces, though.

accent
$14.50 EACH

EIGHT LEADS

Good for detectives, and equally handy on this 9-pin Molex connector with (8) leads breaking out into (3) different pairs of leads with (2) offset and (1) regular Molex connector, plus (2) wires left over. Measures 7” long between the connectors. Great for DIY'ers looking for extra connectors. Now go wire something.

accent

9-PIN MOLEX CONNECTOR

EIGHT LEADS

Good for detectives, and equally handy on this 9-pin Molex connector with (8) leads breaking out into (3) different pairs of leads with (2) offset and (1) regular Molex connector, plus (2) wires left over. Measures 7” long between the connectors. Great for DIY'ers looking for extra connectors. Now go wire something.

accent
$2.75 PKG (2)

POWER THAT PROJECT

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are 1/16” ID. Wired with 2” leads (positive and negative) for super easy battery or wall adapter hook up. A little dusty but incredible for scout projects, classroom robotics projects or making your own army of walking zombies.

accent

CLASSROOM PACK 3-6VDC PULLEY MOTOR

POWER THAT PROJECT

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are 1/16” ID. Wired with 2” leads (positive and negative) for super easy battery or wall adapter hook up. A little dusty but incredible for scout projects, classroom robotics projects or making your own army of walking zombies.

accent
$15.95 PKG (32)

Medical Valve Assembly

These high-end valve assemblies are medical take-outs from Lee Industries, but that’s all we know except that they look really expensive and fancy and high-quality, and are probably worth much more than we’re selling them for. Each has a 3VDC 275mA 2-phase stepper motor into a 5-250uL valve housing with a 5-pin connector that hooks up to (3) Omron infrared-based photomicro sensors. There’s what looks like a 4-pin encoder on top, as well as a 1/16” barb. Lee part # LPVX0520750CA.

accent

3VDC VALVE ASSEMBLY

Medical Valve Assembly

These high-end valve assemblies are medical take-outs from Lee Industries, but that’s all we know except that they look really expensive and fancy and high-quality, and are probably worth much more than we’re selling them for. Each has a 3VDC 275mA 2-phase stepper motor into a 5-250uL valve housing with a 5-pin connector that hooks up to (3) Omron infrared-based photomicro sensors. There’s what looks like a 4-pin encoder on top, as well as a 1/16” barb. Lee part # LPVX0520750CA.

accent
$14.50 EACH

Time For Your Screen Test

Take care of your screens and they'll take care of you. (A drill sergeant told us this about our socks once, but this time it's true.) This kit includes (3) wet and (3) dry anti-static wipes, a 7" x 4-1/2" microfiber cleaning cloth, and (6) self-adhesive clear vinyl screen protectors at 3-1/2" x 2-3/4" with a grid on the back to help cut them to size, and a little plastic thingy to squoogee the air bubbles out.

accent

SCREEN SAVER CLEANING KITS

Time For Your Screen Test

Take care of your screens and they'll take care of you. (A drill sergeant told us this about our socks once, but this time it's true.) This kit includes (3) wet and (3) dry anti-static wipes, a 7" x 4-1/2" microfiber cleaning cloth, and (6) self-adhesive clear vinyl screen protectors at 3-1/2" x 2-3/4" with a grid on the back to help cut them to size, and a little plastic thingy to squoogee the air bubbles out.

accent
$3.75 PKG (3)

Showing 145–162 of 164 results