Robot Parts

This bipolar, 2-phase stepper motor from Shinano Kenshi Corp (SKC) draws 500mA at 9VDC with a 0.9 deg./step. Coils are brown/orange and red/yellow. Measures 1-7/16" dia x 1/2" with a 4" long, 3/8" threaded shaft, and mounting wings with 1/8" holes.

5...4...3...2...1...Launch! What we have here is a bunch of toggle switches rated at 20A, 12VDC (Max) with LED lights in their tips so you can tell when your rockets are hot and ready to launch. On/off 2-position standard size toggles, SPST. with a 12mm...

This silver 9VDC air pump with a clear pumping assembly is 3-1/2" x 2” x 3” with a piston behind the clear plastic on one end. Both the 7/16” intake and ¼” output are on one side of the assembly. We couldn't find exact info...

No, not knives. These are bayonet bulbs, so named because you push them in and twist, just like mounting a bayonet. Our each is a 2-pack of 12V 8W bulbs, most likely for automotive use.

No Mount Motor... Our motorman, CJ, called this reversible 12-24VDC motor strange, mostly because it has the power contacts mounted on the face, bracketing the 11/16" x 1/8" mostly striated shaft, and has no mounting brackets. But that shouldn't stop a...

…with this nice little gear motor. Nominally rated for 24VDC and draws .2A with no load, this motor spins clockwise at 24RPM. The motor measures 2” X 1-1/8” and comes on a mounting bracket, but that’s removable. Shaft size is...

A Breath Of Fresh Air That’s us, a breath of fresh air in the shopping atmosphere. Also, your source for these surplus Swiss-Air™ II Freshener Systems--one with a motion activator, and one without (you pick). Originally...

This 3-9VDC 3-1/2” long cylindrical style motor was once going to be an airpump. Open on one end has a piston style action coming off the shaft side with cam and piston attached. Overall it measures 3-1/2” x 2-3/4” x 2”. Has two...

And hey there, missus, too. This wired thermistor is a take-out from unused humidifier equipment. Has 10K Ohm resistance, which goes down as the temp goes up. Includes 39” leads, and measures 1-3/16” long x 1/4” dia thermistor.

Don’t you hate having to all the time run out to the electric store for speaker wire? Us too. That’s why we have this 500-foot spool of standard 24AWG wire with clear insulation in our closet. Now you can too.

Remember those old school vibration football games, or those fantastic days-of-yore vibrating beds in roadside motels? This is like that, just sized to today's pocket-held devices. It's a very small vibration motor (10mm dia x 2.5mm) that produces a...

Eight Leads Good for detectives, and equally handy on this 9-pin Molex connector with (8) leads breaking out into (3) different pairs of leads with (2) offset and (1) regular Molex connector, plus (2) wires left over. Measures 7” long between the...

This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.

This 3-6VDC motor operates optimally at 6VDC, draws 450mA no load, stalls at approx 2.4A and spins at about 13K rpm. Measures 2" long x 1-1/16" dia with a little 3/8" dia x 5/16" 12-tooth gear. Simple +/- leads are wired to a double jack that can easily...

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are...

These high-end valve assemblies are medical take-outs from Lee Industries, but that’s all we know except that they look really expensive and fancy and high-quality, and are probably worth much more than we’re selling them for. Each has a 3VDC...

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are...