A handy space-saver, this 6-outlet tap expands a double outlet (with grounded plugs) to take (6) grounded plugs. In off-white plastic, it measures 4-3/4" x 3-1/8" x 1-1/4" thick, with the outlets on the long sides. The plugs run in the same direction, along the long axis. Can also be flush-mounted if you remove the existing wall plate, since it will take a long screw (not included) through to the outlet threads. Rated for a maximum of 15A. Great for behind furniture, TVs, etc. UL.

Converts (1) grounded outlet to (3) outlets, oriented so that the plugs you add run along the wall, not perpendicular to it. In dark green, with a 15A maximum. Indoor use only. UL.

Take care of them all with this grounded and surge-protected wall tap with (6) outlets plus (2) USB ports--and everybody needs USB ports. Converts a standard double outlet to an 8-way source that will support up to 15 Amps. USB puts out 2.1 Amps. Measures 5-5/8" x 3-1/2" x 1-5/8" in a light gray/beige color. ETL listed. Even includes the center screw (most don't) to anchor it to the wall plate so it wont pull out!

No funny business here folks. Just the facts. Ivory colored standard medium base 2-outlet socket adapter. Turns any medium base outlet into a 2 prong socket for plugging stuff in. It's also a pass--through for the bulb. From General Electric. 660Watt/120VAC max receptacles and 250Watt/120VAC max socket. 

This programmable digital timer from Velleman® plugs into a standard wall outlet and has a max load of 1800 watts/15 amps. Has a large LCD display, (10) daily or weekly on/off programs with a minimum time interval of (1) minute, 12- and 24-hour modes and a daylight savings function. In understated white plastic with black buttons, it measures 5” x 2-1/2” x 3”. Comes with instructions, and the internal rechargeable battery that keeps the display on will need about a 8 hour charge, so just leave it plugged in.

Can't beat this price for (30) 2' Replacement T-8 tubes.  Under $1/each! You know the type. Double pin on both sides. Ours are 5000k, Approx. 1500 Lumens, 10W and are frosted to disperse the light. Wiring diagram on lamp shows how to retrofit them but do require a driver. Guess what...We have the drivers. Click here! One heck of a deal. Please Note: These need to be retro fit and cannot just be swapped out with existing lamps. See photos.

Why curse the darkness when you can light these 120V 10W candelabra bulbs in the electric candelabra you build. Which you can do because each bulb comes in a matching socket, dark brown, 1-1/8" tall x 13/16" dia with steel wings to compress it into a fitting. Each socket is rated for up to 75W and has quick-disconnect terminals on the bottom. UL.

Call us dim bulbs and we won’t argue. We’ll just let you pick from our selection of dimmers. All of them are made for standard electrical boxes, and you'll need 1-3/8” back clearance. All are good with incandescents but not CFLs, and can be used with LEDs, but will then not fade to total black. All include wiring instructions, screws and wire nuts and are UL listed. The rotary dimmer is for for ceiling or wall-mounted light fixtures up to 600W (400W for multi-gang), and has a push-switch for master power. The dual slide one is for (2) 120V fixtures up to 300W, and has a full-off switch at one end of the faders. The 700W slide dimmer for a light fixture has an SPST rocker switch and is OK for single or 3-way wiring, although multi-gang wiring will be lower wattage. The toggle dimmer is rated at up to 600W, and has a full-off position at the bottom of the throw.

An 11/16" long x 7/16" ID steel socket for candelabra bulbs. Two tabs come up from the bottom to panel-mount it. Add power through another tab bent downward and one extending out to the side.

This panel-mount, grounded outlet from Eagle Electronics is rated for up 15A at 125V, and measures 1” square. You’ll need 1-1/2” clearance on the back. Has a pair of retaining clips, (2) spade terminals and a ground screw. UL/CSA.