The 8-in-1 screwdriver/flashlight combo from iZoom® features un-lose-able drivers. Includes slotted 1/8", 3/16", 1/4", Phillips #0, #1, #2, plus mini-slotted and Phillips, all on hinges at the bottom of the light. Swing them up and they snap in place with the light as a handle. The light/handle has (6) cool-white LEDs shining at 100 lumens. The whole shebang measures 5” long x 1-3/4” dia. and requires 3 "AAA' batteries which are included. 

Yes, there’s a scientific explanation, but we prefer to think this magnetizing/demagnetizing tool relies on magic. Stick a screwdriver head in the bottom, it’s magnetized. Stick it in the top, it’s demagnetized. Fun for the whole family. Measures 2” square x 1-1/4” with stair-step ports for blades of different sizes. Never drop a screw again.

This 34-piece set of chrome vanadium bits includes 1/4" hex bits with (8) security Torx from T8 to T40; (3) Pozi from PZ1 to PZ3; (2) Phillips at PH1 & PH2; (6) security Hex from H2 to H6; (4) Tri-wing from Y1 to Y4; (4) spanner head from U4 to U10; (3) Torq from S6 to S10; and a 6mm slotted bit. All are 3” long. Includes (2) mag-demag blocks, and a storage case.

We like these small pliers and cutters - they're a higher quality than most of the Chinese import tools we're offered. They are drop-forged, high-carbon steel with double-leaf springs, lap joints and rubberized foam handles. There is a trim 6" needle nose, and a 4-1/2" mini-round diagonal cutter. For precision work and hobbies, and especially nice for anyone with small hands.

These high-quality 8” long nickel-plated pliers from Tolsen Tools have an extra long nose, even when they’re telling the truth, and, as you know, pliers never lie. The 3” long jaws finish with a 1/2” gripper section and another side-cutter section. Also have coated plastic handles.

For these pliers--known at lineman’s pliers, TLs or combination pliers--the combination is a blunt nose, flat serrated gripper, rounded gripper and cutting jaws, in that order. Ours is a quality tool from Tolsen Tools, 8” long in nickel-plated steel with plastic-coated handles.

This 9-piece hex key set (“Allen wrenches” to their friends) is made of chrome vanadium steel with ball point ends on the non-business side. You know how you always need an Allen wrench at some point? And you have most of the sizes but not the one you actually need? Those days are over with this set. Sizes include: 10, 8, 6, 5, 4, 3, 2.5, 2, and 1.5mm. Lengths range from 1-3/4” to 4-1/2”, and they come in a nice folding holder for those times that you don’t need them.

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments include slotted, Phillips, square (Robertson) head, torx, hex and 12-point bits, plus security Phillips, torx and hex, and (4) different driver adapters (one of which, a super-cute cup-hook driver, has us oddly excited). They're all in a flip-top plastic case. How come it's surplus? If you turn it upside down and shake it, some of the bits fall out of their little size-marked slots. So don't do that. Or stick a thin sheet of foam inside it and all will be well.

Pick a pair of mini pliers, each set small enough to tuck into your pocket without causing a limp. You pick: the regular pliers pair has one standard pliers with grooved jaws and one slip-joint pliers, the ones we can't use the word channel about, both approx 4” long with padded handles; or the pair of locking pliers, the ones we can't use the word vice about, one blunt-nosed with grooved jaws at 4-1/4” long, and one needle-nosed at 5” long. All are nickel-plated, drop-forged, and heat-treated.

Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” bits. Measures 9” long over all with a flexible portion that’s 4-1/2” long and will bend 180 degrees.