These Night Angel deluxe outlet covers are more than just your standard, run of the mill, white plastic covers. What we have here is a 3-pack that replaces standard 2-outlet covers and have...wait for it...wait for it...3-LED night lights built into the bottom of the cover. Powered by the outlet itself, these glow a gentle white light while lighting your path so you don't trip on the dog or step on a Lego. (Been there, done that). Lasts over 100,000 hours and each has a built in light sensor to automatically turn off in the daylight. Remove outlet cover plate, slide Night Angel Deluxe in its place. The two metal tabs make contact with the outlets screws. Presto instant light. Work best with verticle outlets. While these are simple to install, a little working electrical knowledge helps. ETl/Intertek. From OnTel Brands. Instructions included.

You probably won’t see these Farpoint® LED bar lights in any taverns or discos, but you never know. They’re called bar lights because they’re long and thin, like a bar, and you’ll get (2) of them, each weatherproof and blasting 350 lumens of brightness. Measure 12-3/4" x 1-3/4" x 1/2", and they’re easy to mount. Motion- and light-activated, and rechargeable battery-powered. Run for 2-1/2 hours nonstop, and have a (3)-mode switch (on/off/motion detection that turns off in 30 seconds) and a 10-foot sensor. Perfect for senior safety with middle of the night bathroom needs, a laundry room, closet, workshop or garage, but with the understated silver trim, you could put them anywhere. Come with magnetic steel mounting plate and self-adhesive backing. Set also includes a Micro-USB charging cable.

We love a good wine label, but nothing makes an empty bottle stand out like these LED string lights. Go ahead—buy the cheap stuff (wine nerds call it “plonk”), and once you’ve polished it off, drop this 30” long wire into it and turn it on. Cork-shaped stopper holds the (3) included button-cell batteries and sits at the top of the bottle while (9) LEDs glow inside. Instant decorations.

These are called Infinity Lights because they give the illusion, using LEDs and a mirror, that the space you’re looking into goes on forever. Have LED strips inside and measures approx 6” x 7-3/4” x 2-3/4” deep. Pretty cool, we have to say, just remember to peel off the protective films and don’t stick your fingers or nose on them. You pick: the Unicorn shape with RGB LEDs, or the Star shape with white LEDs. You supply (3) “AA” batteries, and today’s your lucky day, because we carry those too.

Keep your nights free of terror with these color-changing, 3D looking night lights with remote control. Light shines through a plexiglass cutout to illuminate the engraved image. All (3) have a hockey puck-like base, approx 3-1/4” dia x 1-1/2” high, and the whole thing stands about 6” tall. Tap the single button on the base to change color, mode and turn off/on or use the battery-included remote to select one of 16 pre-set colors, 4 modes, increase/decrease the brightness or, of course, turn it on/off.  You pick the image: super sports car, triceratops, or heart with the word ”LOVE”. Includes a 37" micro-USB cord, you supply (3) AA batteries for remote terror-free dreams, despite what the box says.

Jarvis says: Don't forget to peel off the cloudy protective film from the back of the plexi cutout.

There’s no snap or pop, but this solar-powered LED accent light definitely has some crackle. Bulb throws cool white light, and the 5” tall clear glass tube looks crackled, or ice-spackled. It’s very cool, whatever you want to call it. The whole thing measures 8” long x approx 3-1/4” dia with an extra 1/4” mounting support on each side and is open on the bottom. Makes for a nice wall sconce. It’s weatherproof, IP54-rated, with 6 to 8 hours of operation on a full charge. Turns on at night, off in the day, like a good light should. Uses a “AA” 300mAH rechargeable battery (included). No need for wires or outlets. Simple installation, mounting hardware included.

Fancy up your lighting with these flame-shaped LED bulbs. Base is E-14 European-Edison size, and they have a diamond-shaped faux-filiament and vertical cooling slots in copper-colored aluminum around the bottom half. You pick the warm-white 3W (40W equivalent); the cold-white 3W (40W equivalent); or the cold white 5W (60W equivalent). Also, finding E14 to E12 adapters on the web is a snap.

These unusual, yet semi-awesome, accent light fixtures are brushed aluminum cans, 2-3/4” tall x 2-1/8” dia, and emit white light from an internal LED. Have a pair of 5/32” mounting holes on a removable back plate and (44) 5/16” dia holes spiraling around the top half. We like them wall- or ceiling-mounted for atmosphere. Rated at 85-265 VAC so they work on standard household voltage. Draw just 1W and have 2”+ leads.

Our uber-slick, modern wall sconce is a COB LED that draws just 1W and throws white light up and down from a 3” long x 2-3/8” square hunk of brushed aluminum that’s open on the ends. (Yes, could be mounted to light to the sides, and yes, it could be a ceiling mount.) Has a pair of 1-1/2” torsion springs to pull it tight to the wall from behind. Operates between 85-265 VAC, so standard house current works but the light needs to be hard-wired. Includes a driver circuit and leads. From Lumicon.

This small red-lensed indicator lamp is rated for 250V 2mA but is fine with 120V. Has an 11/32" dia lens in a 1-3/8" long housing with (2) 8-1/2" long leads.