Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.

Hang it all with this set of (10) magnetic hooks. The 1-3/16" long x 9/64" hooks screw into 1-3/8" dia magnetic bases with an approx 8-lb pull, which is heavier than most jackets and keys. Good for horizontal or vertical mounts, and dandy for adding hooks to gym or school lockers.

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

Donut magnet you can take to town!! 74mmdia x 14mm thick with a 30mm hole. Verystrong and well pedigreed - in fact, its kin areactivating pacemakers. They are of a high permeabilityferrite material with a lovely light blueor white epoxy coating. Okay, we have thembecause there is the odd bubble, slight scratches orthe word MAGNET painted in the coating which ruled them outof the medical ball, but they're fine company nonetheless. Gooddisplay bases, paper clip traps, and super for classroom demos.

Voted most likely to attract by the judges, this magnet has the relative strength of 10 men. A shiny silver 1/2" cube of neodymium magnetism, it packs approx a 15-lb pull. If our boss Pat were that strong he could lift 2,160 lbs! Besides its superpower strength, this beautiful cube also would improve the looks of your fridge or bulletin board to no end.

This plated N52 14,200 gauss neodymium magnet is shaped like a miniature silver ingot, measuring 1-1/2" long x 1/2" wide x 1/8" thick. Has a big hangonability quotient, which the manufacturer claims is 15 lbs of pull, meaning it's probably closer to 13 lbs. Impressive either way for such a cute little magnet. 

Okay, it isn't the cheapest magnet in the warehouse - but we pulled about 35-40 pounds with this 4-7/8" x 1" x 3/4" ceramic magnet,  and we think it's a bargain. It has a 6" bracket with mounting holes on 5-1/2" centers, plus a 1/2" ID eyehook bolted into the center of it. It's all set to troll the bottom of the lake next time your filing cabinet falls overboard.

Add a door/drawer pull to any ferrous surface with this 1" dia x 1/4" thick neodymium disc in a polished sleeve with a 3/16" dia hole in a stand-off. Comes with a 1" slip-ring attached, and hangs on for 22 lbs worth. Plenty handy for hanging stuff from other stuff, too.

Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

We're liking this little plated N45 neodymium magnet because it will stand on end and stick out very prettily on the ice box. Measures 1" tall x 1/4" square with a hefty, for its size, 3-1/2 lb pull, 13,800 gauss. (Will also lie down on its side, of course, because everybody does.)