These itsy 120V neon lamps have negligible current draw and green sleeves over the lenses. Leads are 4-1/2" long with an inline limiting resistor on one. Made in the USA.

Sounds like a Shirelles song, Baby Blue Teardrops, but these are really your standard household current night-light bulb (also seen strung on tannenbaums across the land). Ten watts with the usual E12 candelabra base, with a translucent bluish tint.

Cage the wild light bulb in order to protect it from its natural enemy, Vandalus urbanosa. Unlike the domestic indoor bulb which can be protected with a silk or paper shade, this more-endangered bulb is found outdoors or in rugged industrial habitats. Our yellow-plastic cage is available for bulbs of 100 watts or less. (Bulb should not touch plastic.) This cage is 6-1/2" long x 5" dia at its widest point. One side has a release latch for access to the bulb. It fits over a medium-base socket to protect the lamp in it. Hardware included.

And vice versa. Luckily, you’ve come to the right place, where we’re pairing clear glass 2.2V, .25A wavy, flame-shaped candelabra bulbs, 1-1/2” tall x 5/8” dia, with matching steel sockets, 11/16" long x 7/16" ID, with (2) power tabs. Sockets have a pair of clips for securing them in the light fixture. You’ll get a package of (5) bulbs and (5) sockets.

Neon indicator lamp, complete in a snap-in panel mounting. The mounting bezel is 7/8" x 1-1/2" and the lamp lens is 7/16" x 7/8". UL and CSA rated for 3/8 watts, 125 V. It has (2) spade connectors and should be great for the model railroad control panel.

These unusual, yet semi-awesome, accent light fixtures are brushed aluminum cans, 2-3/4” tall x 2-1/8” dia, and emit white light from an internal LED. Have a pair of 5/32” mounting holes on a removable back plate and (44) 5/16” dia holes spiraling around the top half. We like them wall- or ceiling-mounted for atmosphere. Rated at 85-265 VAC so they work on standard household voltage. Draw just 1W and have 2”+ leads.

If not, you need this modern accent light. In brushed aluminum, this one’s a circular light diffuser with (3) dozen 3-headed fins. Measures 3-1/2" dia x 1-5/8" below a 2-3/4” x 1-3/16” solid housing. Housing has 2” leads and a bar mount. Operates between 85-265 VAC, so standard house current works but the light needs to be hard-wired. Draws just 1W for a warm-white LED. From Lumicon.

Our uber-slick, modern wall sconce is a COB LED that draws just 1W and throws white light up and down from a 3” long x 2-3/8” square hunk of brushed aluminum that’s open on the ends. (Yes, could be mounted to light to the sides, and yes, it could be a ceiling mount.) Has a pair of 1-1/2” torsion springs to pull it tight to the wall from behind. Operates between 85-265 VAC, so standard house current works but the light needs to be hard-wired. Includes a driver circuit and leads. From Lumicon.

Fancy up your lighting with these flame-shaped LED bulbs. Base is E-14 European-Edison size, and they have a diamond-shaped faux-filiament and vertical cooling slots in copper-colored aluminum around the bottom half. You pick the warm-white 3W (40W equivalent); the cold-white 3W (40W equivalent); or the cold white 5W (60W equivalent). Also, finding E14 to E12 adapters on the web is a snap.