Paul went out to the warehouse and almost picked up a pallet jack with this monster 2” square 100-lb pull retrieving magnet from Magnet Source®. Painted red it stands 2-3/4” high with a 1” dia (5/8” ID) eyebolt screwed and bolted into the top, and has welded steel construction to protect and focus the ceramic magnets inside. Includes (2) magnetic shields that you remove before use. Attach a rope or chain to the eyebolt to retrieve or hang heavy items, or use to hold/position hoses or wiring temporarily. Also good for plucking stuff out of rivers and other waterways when the fish aren’t biting.

This 16-piece set of watchmaker's tools are just as handy for jewelry-makers, crafters, or anyone else working with small parts. The professional watch-repair kit Includes (2) tiny Phillips-head screwdrivers, (3) diminutive flat-heads, a case knife, non-magnetic tweezers, case wrench, metal/plastic watch hammer, link-pin remover, double-head pin pusher, (3) pin-punches, small needle-nose pliers, and a watchband holding block. Just changing bands and batteries? Get these tools to make it a lot easier, and order a brand-new pack of 30 popular-size button batteries-(6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13.

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

Silent movie star—came to a bad end. Also this 38-piece stubby handled driver and bit set in an easy-to-tote case. Forward, reverse and lock settings. Includes 3mm, 4mm, 4.5mm, 5mm, 6mm, 7mm slotted; #0, #1(2), #2(2), #3(2) Phillips; #0, #1(2), #2(2), #3(2) Pozi; T8, T10, T15, T20, T25, T30, T35, T40 torx; 3mm, 4mm, 5mm, 6mm hex; and #0, #1, #2, #3 square. Whole shebang in a 3.5" x 6.5"x 1.25" case. Get ratcheting.

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

This approx 5-1/2” long x 1-1/2" wide plane from Great Neck® feels great in the hand (but not on the neck!). Made entirely of metal, it sort of resembles a stapler. Allows you to shape, trim, shave and plane wood and soft metal. Blade needs no adjusting, and it won’t clog. This is a handy, compact tool for your collection.

You say your ex locked your bike to a fence just to be cruel? We’ve been there. Worry no more. From Tolsen Tools, this 8" long mini bolt cutter is compact and ready to slice through steel. Has a CRV steel blade which opens to 1/4" max., a steel-plated handle with a soft grip and a wire lock to keep them closed. Tolsen makes good stuff. After you free your bike, go find something else to cut.

These 10" Tolsen Tools chrome-moly beauties are aviation snips, right-cutters with a compound action and 1-1/2” long fine saw-tooth cutting blades. Will cut up to 1.5mm cold-rolled steel, 1.8mm aluminum, or 1.0mm stainless steel. Coated handles and a blade lock. Our Whs manager John, uses them around the shop to cut steel banding cable on pallets. If they’re Tolsen, you know they’re tough.

You’ll never feel like a hack with this 16” quick-refill tension hacksaw from Great Neck. It’s all metal with a rubber handle grip, and it includes a standard 1/2” fine-tooth blade. (replacements available at any hardware store) A thumb release on the handle swings it open to quickly discharge the old blade for replacement. No screwing around here! Celebration cake not included, but you won’t even need a separate knife.

Everything from Tolsen Tools is solid, and that includes this 8" long end cutting pincer tool with 1-3/16" jaws. It’s made of chrome vanadium steel, and you should get one for that reason alone. Not to mention the soft and grippy rubber-coated handles. Damn, we love quality tools.