In the universe of reed switches, we're assured that this one is quite snazzy. In a 1" x 9/16" x 3/8" housing with a  3/8" mounting wing with (2) 3/32" mounting holes. Trigger distance is approx 1" regardless of magnet strength. Comes with 20" tinned leads. Rated for 400mA at 24VDC. Normally open.

Perhaps a switch in time won't save nine, but if you keep getting caught without the goods, and have to rush off to the local high priced supplier, we can help. Of our assortment of (10) switches, (at least (5) different) should have the answer to a wide variety of needs. It contains an assortment which may include toggles, rockers, rotarys or slide switches in a variety of sizes. Chances are you can find what you need, or at least something that will serve. Try it!!

These momentary SPST push-button switches are normally open and measure 11/16" dia x just over 3/16" thick and have a 15/32" shaft with a steel lock-washer & nut plus a pair of 1/8" solder terminals on the bottom. Rated 3A at 125VAC or 1A at 250VAC. You pick red, green or yellow.

These vacuum-sealed glass-cylinder switches have bimetal contacts inside. Normally open, they make contact at approx 500°F. Our vacuum-sealed-bimetal-switch boffin calls the leads "pretty skinny" and suggests low-power applications only. Measure 1-1/8" x 1/2" dia with 3/4" long leads.

And hey there, missus, too. This wired thermistor is a take-out from unused humidifier equipment. Has 10K Ohm resistance, which goes down as the temp goes up. Includes 39” leads, and measures 1-3/16” long x 1/4” dia thermistor.

Omron #A6D-6 PC mount dipswitch with (6) SPST switches. If you're not into switching dips, try making one into a caterpillar body for an art project!!

An LED that really shines. The red LED is configured with a resistor and works at 9-12 volts. It's held by a 1-5/8" bracket behind a 1-1/4" x 7/16" x 5/16" deep SPST slide switch, and has (2) 4" leads. All ready to roll.

Black plastic momentary push-button switch. Rated 1/4 amp at 250 VAC. Measures 1-3/8” tall, fits 3/8” hole. Panel-mount, with a pair of nuts on the threaded shaft, and (2) screw terminals. Great for all of your DIYers, makers and hobbyists of all stripes.