RUBBER SYRINGE BULB WITH 2” TIP
This Bulb Really Sucks!
Sucking, of course, is the syringe bulb’s raison d’etre, and this one’s insatiable! Got a baby? Baby got snot? This little nose-vacuum will do the trick. Ear wax building up? Bring it on! Kitchen spill? Get a mop already—there are limits. But the 2.25" ridged rubber bulb and 2” tapered tip, 0.2" at the end, feel so good in your hand, you’ll happily agree next time someone tells you how much you suck.SHARE
Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.
Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.
Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.
Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.
Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.
Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.
What you torch is up to you, but we suggest you do it with this extra-high temperature 2300F refillable butane Torch Blue. It’s handheld, in a pistol-grip style, with a blue cylindrical body/handle, a wide black plastic base, a silver nozzle up top and a blue sliding lever control. Measures 6-1/2" x 5" x 2-1/2" comes empty but takes standard butane canisters. Creme brule anyone?
What you torch is up to you, but we suggest you do it with this extra-high temperature 2300F refillable butane Torch Blue. It’s handheld, in a pistol-grip style, with a blue cylindrical body/handle, a wide black plastic base, a silver nozzle up top and a blue sliding lever control. Measures 6-1/2" x 5" x 2-1/2" comes empty but takes standard butane canisters. Creme brule anyone?
These lights have COB LEDs in a 3-2/4” x 1-1/4” lens that rotates 250 degrees out of a red and black triangular housing. Two magnets in the base make them perfect for shedding light down on a locker shelf or workbench, or as a work light stuck on the underside of a car hood or trunk lid. Also has (6) LEDs on one end, so it will also function as a flashlight. The push-button lights the lens and flashlight in sequence. The housing measures 5” long x 2-1/8” on a side. You add a quartet of “AAA” batteries.
These lights have COB LEDs in a 3-2/4” x 1-1/4” lens that rotates 250 degrees out of a red and black triangular housing. Two magnets in the base make them perfect for shedding light down on a locker shelf or workbench, or as a work light stuck on the underside of a car hood or trunk lid. Also has (6) LEDs on one end, so it will also function as a flashlight. The push-button lights the lens and flashlight in sequence. The housing measures 5” long x 2-1/8” on a side. You add a quartet of “AAA” batteries.
Or bag something else in this olive drab unwashed 100% cotton canvas mechanics tool bag with webbing carry handles. Bag measures 11" x 7" x 6" with a zippered middle compartment, which is wide open with (8) interior side sleeves to hold pencils, tire gauges and items like that. Also has (2) double-zippered side compartments, (1) adorned with cool-looking orange printed tech info about the bag. Firm bottom permanently sewn in. It’s a sturdy, handsome little bag, no two ways about it.
Or bag something else in this olive drab unwashed 100% cotton canvas mechanics tool bag with webbing carry handles. Bag measures 11" x 7" x 6" with a zippered middle compartment, which is wide open with (8) interior side sleeves to hold pencils, tire gauges and items like that. Also has (2) double-zippered side compartments, (1) adorned with cool-looking orange printed tech info about the bag. Firm bottom permanently sewn in. It’s a sturdy, handsome little bag, no two ways about it.
From Morris Products, this heavy-duty plastic resin toolbox is lightweight and both weather- and impact-resistant. In gray and yellow, it has lid snap locks, a hasp for a small padlock, and an interior removable tray with a handle. The top has a fold-down handle, (2) slide-out lidded storage containers, plus a 20-slot driver-bit keeper. Measures approx. 16" x 10” x 7” deep.
From Morris Products, this heavy-duty plastic resin toolbox is lightweight and both weather- and impact-resistant. In gray and yellow, it has lid snap locks, a hasp for a small padlock, and an interior removable tray with a handle. The top has a fold-down handle, (2) slide-out lidded storage containers, plus a 20-slot driver-bit keeper. Measures approx. 16" x 10” x 7” deep.
Could be what you do if you’re buried alive, or if you want to dance your life away, but most likely it’s a description of the machinist’s friend. This tap & die set cuts straight, clean threads and includes a 1/8” to ¼” tap wrench, and a tap & die in 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, 1/4 – 20 NC and 5/16 – 18 NC. In drop-forged, heat-treated steel coated with titanium nitride. Titanium tools!
Could be what you do if you’re buried alive, or if you want to dance your life away, but most likely it’s a description of the machinist’s friend. This tap & die set cuts straight, clean threads and includes a 1/8” to ¼” tap wrench, and a tap & die in 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, 1/4 – 20 NC and 5/16 – 18 NC. In drop-forged, heat-treated steel coated with titanium nitride. Titanium tools!