Surprise Special Free Gift this Week Just for Ordering! We’ll Just Add to Your Box!

Nickel-Coated, Quarter-Sized

Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

accent

1 INCH SUPER STRONG NEODYMIUM DISK MAGNET

Nickel-Coated, Quarter-Sized

Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

accent
$4.35 EACH

Metal Models Are Better Models

From Fascinations®, these small model kits are made from intricately laser-cut polished steel. Punch the pieces out from the 4-1/4" square sheet and put them together with the tiny tabs. You pick the dragonfly, with a 4-1/2" wingspan or the Black Pearl pirate ship, approx 3-1/2" long. For ages 14+, because they take plenty of small motor skills.

accent

FASCINATIONS® STEEL BLACK PEARL MODEL KIT

Metal Models Are Better Models

From Fascinations®, these small model kits are made from intricately laser-cut polished steel. Punch the pieces out from the 4-1/4" square sheet and put them together with the tiny tabs. You pick the dragonfly, with a 4-1/2" wingspan or the Black Pearl pirate ship, approx 3-1/2" long. For ages 14+, because they take plenty of small motor skills.

accent

Who’s Metal Model

From Metal Earth®, the people who make shiny metal 3D models, now comes the Doctor Who T.A.R.D.I.S. metal model. All punch-outs with no glue or soldering required. 1-5/8” square x 3-1/4” tall. And if you don’t know what Tardis is, you should probably be catching up on classic British Sci-Fi. These are challenging models, so they're rated for all ages over 14.

accent

BLUE 3D TARDIS MODEL

Who’s Metal Model

From Metal Earth®, the people who make shiny metal 3D models, now comes the Doctor Who T.A.R.D.I.S. metal model. All punch-outs with no glue or soldering required. 1-5/8” square x 3-1/4” tall. And if you don’t know what Tardis is, you should probably be catching up on classic British Sci-Fi. These are challenging models, so they're rated for all ages over 14.

accent
$15.95 EACH

Shine Some Tiny Lights

These 3-3/4” black plastic disks are 5/16” thick and were made to display the mini-models from Metal Earth™, which we also have. These bases have a pair of white LEDs at the 4 and 8 o’clock positions, lit by the included button cell batteries in the base or the also-included USB-Mini USB cord. Use them to display tiny treasures, or as nightlights, or just turn them on and play mini-frisbee in a dark room for some excitement.

accent

LIGHTED DISPLAY BASE

Shine Some Tiny Lights

These 3-3/4” black plastic disks are 5/16” thick and were made to display the mini-models from Metal Earth™, which we also have. These bases have a pair of white LEDs at the 4 and 8 o’clock positions, lit by the included button cell batteries in the base or the also-included USB-Mini USB cord. Use them to display tiny treasures, or as nightlights, or just turn them on and play mini-frisbee in a dark room for some excitement.

accent
$7.50 EACH

Tiny & Shiny

Takes a steady hand, a good eye and tweezers, along with wire cutters and needle-nose pliers, to construct these Metal Earth® steel models. Just punch out the tiny parts from laser-cut sheets and assemble them with tabs and slots—no glue, solder or screws required. The Kinkaku-Ji is a three-story Zen Buddhist temple in Kyoto and here it's in gold-tone steel, approx 3-1/2" x 2-3/8" x 2-1/2". Full instructions included. For ages 14+.

accent

KINKAKU-JI KYOTO TEMPLE MODEL KIT

Tiny & Shiny

Takes a steady hand, a good eye and tweezers, along with wire cutters and needle-nose pliers, to construct these Metal Earth® steel models. Just punch out the tiny parts from laser-cut sheets and assemble them with tabs and slots—no glue, solder or screws required. The Kinkaku-Ji is a three-story Zen Buddhist temple in Kyoto and here it's in gold-tone steel, approx 3-1/2" x 2-3/8" x 2-1/2". Full instructions included. For ages 14+.

accent
$15.95 EACH

Tiny & Shiny

For the steady-handed model-maker. These mini-models from Metal Earth® premium series and are demanding and beautiful. Use a tweezers to punch out the little pieces from the laser-cut shiny steel sheets, and assemble them using the tabs and slots--no glue, no screws. You pick the Yamato Battleship (5-3/4” long), or the imperial Star Destroyer (4" x 7") which are both battleships of sorts, we guess. All include instructions, which you’ll definitely need. For ages 14+.

accent

METAL EARTH® IMPERIAL STAR DESTROYER KIT

Tiny & Shiny

For the steady-handed model-maker. These mini-models from Metal Earth® premium series and are demanding and beautiful. Use a tweezers to punch out the little pieces from the laser-cut shiny steel sheets, and assemble them using the tabs and slots--no glue, no screws. You pick the Yamato Battleship (5-3/4” long), or the imperial Star Destroyer (4" x 7") which are both battleships of sorts, we guess. All include instructions, which you’ll definitely need. For ages 14+.

accent

Test Your Metal Mettle

Metal Earth® Kits are not for cowards or the clumsy. Clip the shiny steel parts from their matrix and assemble them with a tweezers. No glue or anything else is necessary, but a steady hand is required. Finished pieces will be approx 3-1/2” tall. For ages 14+. You pick the Japanese Toyotomi Armor or the Chinese Ming Armor.

accent

METAL EARTH CHINESE ARMOR MODEL KIT

Test Your Metal Mettle

Metal Earth® Kits are not for cowards or the clumsy. Clip the shiny steel parts from their matrix and assemble them with a tweezers. No glue or anything else is necessary, but a steady hand is required. Finished pieces will be approx 3-1/2” tall. For ages 14+. You pick the Japanese Toyotomi Armor or the Chinese Ming Armor.

accent

Showing 1–7 of 7 results