Nice rare-earth neodymium disk magnet, 1" dia, about the same as a quarter but over twice as thick at 4mm. Rare-earth magnets are permanent and powerful, and this one has approx 7 lbs pull, and always will. Comes with a galvanized metal keeper approx 2" dia so you don't lose it.

Any Star Wars™ fans out there? Our newest Metal Earth model is of Kylo Ren’s Upsilon-class command shuttle. Yes, this is the one many of you have been waiting for since about 30 years after the Battle of Endor. It’s an epic, highly detailed, museum-quality, 3D steel sheet model, and it’ll be about 4” when finished. Then, all you’ll need is a prominent place to display it.

These 3-3/4” black plastic disks are 5/16” thick and were made to display the mini-models from Metal Earth™, which we also have. These bases have a pair of white LEDs at the 4 and 8 o’clock positions, lit by the included button cell batteries in the base or the also-included USB-Mini USB cord. Use them to display tiny treasures, or as nightlights, or just turn them on and play mini-frisbee in a dark room for some excitement.

From Metal Earth®, the people who make shiny metal 3D models, now comes the Doctor Who metal models. All punch-outs with no glue or soldering required. You pick: the Golden Dalek, at 2-1/4” x 3” x 1-1/4”; or the Blue Tardis model at 1-5/8” square x 3-1/4” tall. And if you don’t know what a Dalek or Tardis  is, you shouldn’t even be reading this. These are challenging models, so rated for all ages over 14.

From Fascinations®, these small model kits are made from intricately laser-cut polished steel. Punch the pieces out from the 4-1/4" square sheet and put them together with the tiny tabs. You pick the dragonfly, with a 4-1/2" wingspan or the Black Pearl pirate ship, approx 3-1/2" long. For ages 14+, because they take plenty of small motor skills.

For the steady-handed model-maker. These mini-models from Metal Earth® are demanding and beautiful. Use a tweezers to punch out the little pieces from the laser-cut shiny steel sheets, and assemble them using the tabs and slots--no glue, no screws. You pick the Hubble Telescope (3” x 2” x 2-1/2”), the U.S.S. Arizona (5-3/4” long) or the Mars Lander (5-7/8" x 2-1/4" x 2-1/2"). All include instructions, which you’ll need. For ages 14+.

Metal Earth® Kits are not for cowards or the clumsy. Clip the shiny steel parts from their matrix and assemble them with a tweezers. No glue or anything else is necessary, but a steady hand is required. Finished pieces will be approx 3-1/2” tall. For ages 14+. You pick the Japanese Toyotomi Armor, Chinese Ming Armor or the European Knights' Armor.

Takes a steady hand, a good eye and tweezers, along with wire cutters and needle-nose pliers, to construct these Metal Earth® steel models. Just punch out the tiny parts from laser-cut sheets and assemble them with tabs and slots—no glue, solder or screws required. You pick: the Apollo 11 Saturn V rocket and gantry, in stainless steel approx 5-7/8" x 2" x 1-5/16"; or the Kinkaku-Ji three-story Zen Buddhist temple in Kyoto, in gold-tone steel, approx 3-1/2" x 2-3/8" x 2-1/2". Full instructions included. For ages 14+.

From the world of Metal Earth® Kits, the domain of the sure-handed, comes this museum-quality 3D steel Star Wars™ model of an Imperial Shuttle. Clip the shiny steel parts from their matrix and assemble them with a tweezers—no glue, solder, or anything else but a steady hand required. Finished piece will be approx 4” tall. For ages 14+ on account of they’re toughies to assemble, but worth the effort.