From ET Tech, this series 23 liquid micro-pump draws less than 300mA at 4-6VDC (5VDC nominal) with a liter-per-minute flow rate and up to a 3-foot lift. Not submersible, but suitable for hot-water apps and continuous duty. Measures 1" x 1" dia with a barbed 1/4" right-angle inlet and a 3/8" OD outlet on top. Great for fountains!
Great little 12VDC oil-less diaphragm style air pump. For you techies out there it draws 40-300mA, 2.0 Litres/min, 350mm Hg max pressure. These are takeouts but in great condition. Outlet port is 5/32". Overall size 2-3/4" x 1-1/16". Koge electronics KPM27H
Here are the ins and outs of submersible
pumps for your DIY fountain.These small electric pumps run on 24 VAC
(For low energy consumption.) from the included wall outlet adapter, are
rated for continuous duty, have (3) suction-cup feet, an adjustable
flow control and both a straight and 90° 5/16" tubing adapter. This
little pump is roughly 2-5/8" x 1.5" x 2-1/4", has a 6-ft power cord
with an in-line switch, and pumps 70 gal/hr @ 1 ft lift. Plug it in and
go with the flow. Indoor use only.
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i.e. it runs on 12VDC @ 10 amps. Air output is via a 12" hose with a variety of valve adapters for tires, soccer balls, rubber rafts, and just dusting off the environment. Complete with a 0-250 psi gauge. Which should be plenty of pressure to explode a weak bike tire or flimsy beach ball, so please be careful!
This nifty little compact air compressor will blow up tires, air mattresses, toys and other inflatables while taking up less room in your car than a tall iced skinny cinnamon dolce latte. Measures 4.5" x 6.5" x 3", including the little head-like 0-250 psi gauge on top. On a 10-foot cord that plugs into an auto cigarette lighter/auxiliary outlet, and comes with (1) needle and (2) nozzle attachments. Also fits standard tire valves.
This 12VDC pump was made for water, windshield washer fluid or other non-corrosive juice. Draws 800mA running but 3A at start-up. No pressure rating listed. Measures 3-3/4" x 1-3/8" dia with an 11/16" OD inlet and a barbed 3/4" long x 7/32" outlet. Power in via 2mm terminals. Intermittent duty.
We’re guessing it’s from a medical device, but we know for sure that it’s a pump assembly from The Lee Company of Connecticut. Looks expensive, like it should cost more than ten times our price, and that’s why you shop here. Has a 2-phase (275mA/PH) 4.4VDC stepper motor, a Honeywell microswitch home sensor and a secondary pressure sensor leading to a 3/32” outlet barb. Has 250uL volume and measures 5-3/8” x 1-1/2” dia with separate wiring to the sensors and motor. Item# LPVX0517.
These windshield-washer pumps are replacement parts for 2013-16 Dodge Darts, but will be happy to squirt on anything you like. They draw approx 150mA at 12VDC with a 7/8" long x 1/4" OD inlet tube with what looks like a small impeller, and a 1/4" OD outlet barb at a right angle. Housing is 2-1/2" long x 1-3/8" dia with shielded electric connectors at the back. Terminal one is hot; two is common. Made in Switzerland, by gosh.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.