These momentary SPST push-button switches are normally open and measure 11/16" dia x just over 3/16" thick and have a 15/32" shaft with a steel lock-washer & nut plus a pair of 1/8" solder terminals on the bottom. Rated 3A at 125VAC or 1A at 250VAC. You pick red, green or yellow.
In the universe of reed switches, we're assured that this one is quite snazzy. In a 1" x 9/16" x 3/8" housing with a 3/8" mounting wing with (2) 3/32" mounting holes. Trigger distance is approx 1" regardless of magnet strength. Comes with 20" tinned leads. Rated for 400mA at 24VDC. Normally open.
An LED that really shines. The red LED is configured with a resistor and works at 9-12 volts. It's held by a 1-5/8" bracket behind a 1-1/4" x 7/16" x 5/16" deep SPST slide switch, and has (2) 4" leads. All ready to roll.
These vacuum-sealed glass-cylinder switches have bimetal contacts inside. Normally open, they make contact at approx 500°F. Our vacuum-sealed-bimetal-switch boffin calls the leads "pretty skinny" and suggests low-power applications only. Measure 1-1/8" x 1/2" dia with 3/4" long leads.
Just like your love life?? This switch turns between on and off when the 1/4" dia x 7/8" long shaft is rotated 90°. Rated 120 VAC, 10 amps, it is 1-1/2" x 1" x 1" deep. (2) threaded mounting holes on the face plate and (2) spade connectors complete the picture.
An old standard from Gardner-Bender®. Their rotary switch is an SPTT (single pole triple throw) rated for up to 6A at 125VAC for both of the loads it can switch. Measures 1" x 7/8" x 3/8" with a 5/8" x 3/8" dia double flattened shaft. UL/CSA.
This 6-position rotary switch is rated for up to 20A at 120/240/277VAC, 10A at 120VAC with an inductive load. Has (3) sets of contacts for multiple on/off combinations. The housing measures 1-7/8" x 1-1/2" on the face and is 1-3/16" thick. The 3-1/2" long shaft with a threaded neck is flattened 7/16" from the tip to fit a knob. Most terminals are on the bottom with (2) coming out of opposite sides near the face. UL/CSA.
This DPDT slide switch has a couple of extra positions and is rated for 13A at 125VAC, 6A at 250VAC, and 0.5A at 125VDC. Measures 1-1/8" x 1/2" x 1/2" counting the (6) solder terminals on the bottom. The two middle positions are tied together.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.