Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.
This 9" wide rubber squeegee has a removable 5" handle for storage, e.g. in a glove box. The squeegee itself slides out of the holder and becomes 9" x 3/4" for the ultimate easy storage. Good for car windows, house windows, shower doors, and it just happens to be perfect for our 9" x 12" computer monitor.
A 2-1/2" x 1-5/8" plastic-framed mirror swivels on a ball-joint mount at the end of telescoping handle that stores at 8" long and extends to 31". The contoured rubber-coated handle makes those double-shift inspection days a little easier.
Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.
Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.
Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.
Like a 300-lb Labrador for the shop. Our ceramic lift magnet is mounted in a metal housing with swivel that will attach to a standard threaded broom handle or painter's pole. Will lift approx 65 pounds, enough to retrieve microwave ovens from storm sewers or pull a small outboard motor from the bottom of a lake. Maybe.
Our bulb-type manual siphon pump comes with 12” and 45” lengths of clear vinyl 3/16” tubing that attach to a 3-1/2” long x 1-7/8” dia bulb. Made for petroleum products. At $3.50, it pays for itself with the first gallon you suck out of your neighbor’s Toyota. (Just kidding!) Use it to empty oil on something besides the garage floor or your head, fill the mower straight from the mini-van, or transfer gas from one vehicle to another. (Check to make sure you own both vehicles first.)
Shove these down the throat of your bigger bottles or tubes and clean up. Measure 16" long over all, with 4" long x 1" dia spiral nylon bristles on a stainless steel handle and a small, but bendable, metal nub on the bottom.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.