Never seemed fair to nail the "lazy" tag so permanently on the "Susans"
but that probably has no "bearing" on the issue. Also called turntable
bearings, they are the square or circular flat ball bearing devices YOU bolt
between two flat objects to achieve rotation. Like that spinning center
section of a Chinese restaurant table. We had these in surplus once and
they were quite popular. To our chagrin, we discovered they could be
bought commercially for the same price. So we did. The 4" version is
rated for a 300lb. load and the 12" (round) for 1000lbs.
That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Small one is 15/16" dia x 7/16" thick with a 3/8" bore and a slight taper and very light striations on the wider face. The middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper. The largest is 1" dia x 17/32" thick with a 3/8" bore.
You pick: the sleeved bearing, sometimes listed as a "special agricultural bearing," is a single race radial bearing, 1-9/16" OD x 5/8" ID x 3/4" with a black plastic sleeve surrounding it, measuring 1-13/16" x 1" with a 1/16" wall; the booted bearing measures 1-1/2" OD x just shy of 11/16" ID x 1/2" thick, inside a 1-13/16" black rubber boot with a removable hex ID bushing.
Interesting concentric sealed bearing, like a pillow block, from Hub City. The outer portion measures 52mm dia x 15mm thick with an anti-rotation pin, and the inner measures 34mm dia x 12mm thick with a 22mm ID bore and (2) 3mm setscrews.
Biggest industrial bearing we’ve seen in a dog’s age, and we’ve got some old industrial dogs around here. This shielded, single-direction roller thrust bearing is 80mm OD x 30mm ID x 36mm thick. Unique bore. Will fit either 30mm square or 31mm round shaft. Part #208PP5.
Well, who doesn’t, really? And yet most of us confine our swiveling to our local dive. Until now, when you can buy genuine authentic bar-stool swivel plates and make home swiveling a reality. In heavy-duty steel, double 7” square plates are separated by a plethora of steel ball bearings, and have 1/4” mounting holes on the corners. Might be a touch stiff at first, but a little break-in swiveling and a drop of oil or dab of grease will fix that. Please note: These are designed to be stiff not swivel freely. To test, add oil or grease, stand on and twist and shout like the Beatles.
Just a real soft name for a hunk of cast iron that holds a sealed bearing. This one measures 3-1/4" wide x 2-3/4" tall x 1-3/4" with a pair of 3/8" mounting holes in the bottom and a 1-15/16" sealed bearing with a 1" ID x 1-3/8" dia x 1-11/32" long bushing with two setscrews to hold a lube-fitting on top.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.