This take-out solenoid valve is a simple open/closed solenoid valve that is normally closed. It draws 100mA at 12VDC. Has 3/16" OD inlet and outlet at right angles to each other. Housing measures 1-3/16" long x 15/16" dia with terminals at the back end.
The automotive relay is rated for up to 40A at 12V with a 9-12 VDC coil voltage. Has SPDT contacts for normally open or normally closed operation. The 1" cube has a 5/8" x 13/16" mounting tab and quick-disconnect terminals on the bottom. Made in the USA for Xpress Electrical, part #RL5. Mates perfectly with our 5-pin socket, already wired with 9" leads in black, red, white, yellow and blue to its quick-disconnect sockets, ready for your 1/4" or 7mm spade terminals. Housing is slotted so you can interlock them end to end. Measures 1-1/4" x 1-1/16" x 1" thick.
We thought power corrupts, but it turns out otherwise. Power locks. You could put these in a car door, or think up something really kinetically clever. These brand new 12VDC door lock actuator assemblies draw 2.6A pushing or pulling with a 5/8" throw. Measure 4-5/8" long x 2-1/4" at the solenoid x 1-3/16" thick. Top is a removable plastic ring. Comes with 6-3/4" x 5/8" steel mounting bracket, a 9" rod and assorted screws.
12VDC relays are on special this week. This little lower-power relay from Kest Manufacturing. Measures 13/16” x 3/8” x 7/16”. Load contacts are rated for 125VAC 1A or 30VDC 2A. Dual sets of NO/NC contacts. Pin-out diagram on the bottom of the housing. UL.
This 3-way, 120VAC refrigeration valve from Ranco has (3) 6" copper tubes on the valve stem controlled by solenoid action, which opens and closes ports to each tube. Measures 4" long including solenoid and valve x 1-1/4" x 1-1/2". Could be part of a cooler or vending system. Ranco part # 1122030-1071.
This rotary solenoid from Shindengen draws 100mA at 30VDC. Measures 1-3/16" dia x 11/16" with a removable 9/16" long x 7/16" - 1/4" cam on one side and another the same but with a 7/16" rod through it. Throw is 40 degrees. Includes 10" leads. Made in Japan.
This little solenoid air valve requires 220mA at 24VDC and is normally closed. Working pressure is 6 psi. The inlet and outlet are 3/16" OD x 3/32" ID x 1/4" long at right angles to each other. Comes with 6" leads with a Molex connector. Part #AJK-F0507.
This 24VAC 6VA electro-pneumatic valve from Siemens USA, #265-1027, has three barbed plastic tube connections- normally open, normally closed and a common for 1/4" OD tubing and is rated for a max of 50psi. Commonly used to alternately apply pressure to and exhaust pressure from pneumatically controlled devices, but we're sure you'll find a clever way to use them in your weekend project. Measures just over 2" x 1-1/2" x 1" and is mounted on a 2-7/8" x 3/4" bracket with 3/16" mounting holes and 9" leads. UL.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.