Now you can have a good, strong hook without drilling any holes. This plated magnetic hook sticks to any ferrous metal surface via a 2" dia alnico magnet with a 10-12 pound pull. Handy gadget to hold a tool, towel, broom or key ring (and if the ring is too heavy, consider throwing away the keys to your 1983 Chevy, and maybe a few more). The 3/4" long J-hooks have threaded ends and are removable. Our each is a package of (2).
Hang it all with this set of (10) magnetic hooks. The 1-3/16" long x 9/64" hooks screw into 1-3/8" dia magnetic bases with an approx 8-lb pull, which is lighter than most jackets and keys. Good for horizontal or vertical mounts, and dandy for adding hooks to gym or school lockers.
If so, you don’t have to bend paper clips to hang stuff from them. You could just buy a bunch of these 2" white plastic ring thingies that twist onto the 1” tracks that hold most ceiling tiles. A 1-3/8” dia tab with a 7/8” dia hole sits perpendicular to the ceiling, ready for whatever you want to suspend from it.
Our each is a set of (42) assorted zinc-plated steel clamps with rubber insulation, for wiring, hoses, etc. You get (20) at 1/4"; (8) at 5/16"; (6) at 3/8" and (4) each at 1/2" and 5/8", all marked with the size and in a plastic storage box.
These 4" long plated steel J-hooks have a 2” ID with a 5/16” twisted loop on top. Made from 5/32” dia steel. Use? String them on a rope between trees and make a camping coat check at a party in the woods. Skewer apples on them and wire up a wreathe. Hang your clothes from the ceiling. Hang tools. Hang a bike. Hang a hammock. Hang etc.
A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that
forms a flange over one face and lines about 3/4" of the length of the
1/4" dia bore. Use it as a grommet, a shock mount, or both. With or
without a brass wire hanger that is set under the insert flange and
extends 1" to the side. The hanger is bent to hold a 1/4" dia wire.
1-7/8" dia. green, brown or orange hard plastic balls with a 1-1/4" ID x 1-1/2" deep hole on one side. Use them as slippery chair feet, as knobs on the ends of levers or tops of canes or even as protective caps for sharp pole ends. The tapered inner veins will provide a tight friction fit. You get an assortment of colors.
Brass L-shaped shoulder hooks (Why aren’t they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total of (6) 1” hooks, or (4) 1–1/2” hooks.
These black steel placard mounts are perfect for restaurant specials, place cards, or more permanent signage. Two very tight 1" tall clips are mounted on an approx 2" x 11/16" base with good'n'sticky self-adhesive foam on the bottom. Also drilled with (2) small holes if you want to nail or screw through the foam.
For store hours, phone and directions, click here.
Or View Our Latest Printed Catalog Online
Our web site always contains everything we have available for sale outside our retail stores. Typically, new items are listed on the site before they get published in our catalog...
Unlike Any Place On Earth
In addition to this fabulous on-line catalog of incredible stuff, American Science & Surplus has three great retail locations. If you're in the neighborhood, please stop by! Store hours may vary. Feel free to call for store hours and directions.