Easy-To-Cut Magnetic SheetThis strontium ferrite sheet is stronger than your average fridge magnet, and considerably bigger. Measures 7-3/8" sq x over 1/16" thick, with (2) adjacent corners trimmed off. Rubberized finish, black on one side, writable white on the other. Can be easily cut with a scissors.
Once upon a time, a copywriter put this little magnet next to his computer monitor and got really pretty, wavy, aurora-like effects. And then got a new monitor! Don't try this at home. Our shiny, silver-colored 1" x 1" x 1/2" neodymium magnet looks innocent, but is industrial strength, pulling something like 25 lbs with enough strength left over to erase all your credit cards. And wreak havoc with your monitor.
Donut magnet you can take to town!! 74mm dia x 14mm thick with a 30mm hole. Very strong and well pedigreed - in fact, its kin are activating pacemakers. They are of a high permeability ferrite material with a lovely light blue or white epoxy coating. Okay, we have them because there is the odd bubble, slight scratches or the word MAGNET painted in the coating which ruled them out of the medical ball, but they're fine company nonetheless. Good display bases, paper clip traps, and super for classroom demos.
Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.
Pick up this 1-3/4" x 7/8" x 3/8" ceramic pick-up magnet while we still have it. It's in a heavy metal housing and has a stationary metal hoop, about 1/2" i.d., on top. The manufacturer tells us the magnet will grab up to 5 lbs of metal, however Pat and Magnet Testing Team #3 have repeatedly lifted 10+ lbs, so it's very strong. Especially if you're going to dangle it on the end of a cord to gather spilled nails or to fish your keys out of the lake/pond/sewer/drain!
Our each is a stack of (10) nickel-plated neodymium magnets. They measure 5/16” dia x 1/8” thick and have about 2 lbs of pull. We like them for light cabinet door latches or hanging your macaroni craft project very securely.
Okay, it isn't the cheapest magnet in the warehouse - but we pulled about 35-40 pounds with this 4-7/8" x 1" x 3/4" ceramic magnet, and we think it's a bargain. It has a 6" bracket with mounting holes on 5-1/2" centers, plus a 1/2" ID eyehook bolted into the center of it. It's all set to troll the bottom of the lake next time your filing cabinet falls overboard.
Voted most likely to attract by the judges, this magnet has the relative strength of 10 men. A shiny silver 1/2" cube of neodymium magnetism, it packs approx a 15-lb pull. If our boss Pat were that strong he could lift 2,160 lbs! Besides its superpower strength, this beautiful cube also would improve the looks of your fridge or bulletin board to no end.
This plated N52 14,200 gauss neodymium magnet is shaped like a miniature silver ingot, measuring 1-1/2" long x 1/2" wide x 1/4" thick. Has a big hangonability quotient, which the manufacturer claims is 15 lbs of pull, meaning it's probably closer to 13 lbs. Impressive either way for such a cute little magnet.
Add a door/drawer pull to any ferrous surface with this 1" dia x 1/4" thick neodymium disc in a polished sleeve with a 3/16" dia hole in a stand-off. Comes with a 1" slip-ring attached, and hangs on for 22 lbs worth. Plenty handy for hanging stuff from other stuff, too.
Very appealing plated N52 neodymium disc magnets are 3/4” dia, which is a bug-hair smaller than a dime, and 1/8” thick. They have an impressive 7-lb pull, while an actual dime won’t hardly buy you anything these days.