This rope hoist has drop-forged, zinc-plated eye-hooks and claims to be rated for a 2,000-lb working load, but we think that's a misprint. Great for easily hoisting lumber and pails of gravel, but leave your grand piano on the first floor, or hire the professionals. The eye-hooks are 2" x 1-3/8" x 1/4" ID, and the nylon triple pulleys provide a 7:1 lift ratio. Includes (65) feet of 1/4” dia poly rope so it stays strong when wet.

These translucent silicone O-rings are 3/32" thick and measure 4" dia. Nice belts for science-project motors and even nicer for our slingshot needs. Crafters will see jewelry material that the metal-detectors won't care about.

Steel. Not used but a little rusty from storage. Handy. Measures 3-1/2" dia with a single 1/2” ID sheave with a 2-1/8" x 1-5/8" dia hub and a keyed 1” ID bore. Drilled for a 1/4” - 16 setscrew (not included). Made in the USA.

This small 24-tooth pulley is 1-1/16" long with 5/16" of that being a 5/8" dia shaft with a 1/2" x 3/8" flattened bore. The pulley portion is 1" OD x 7/8" ID. In shiny silver aluminum.

This 32-tooth gear is 1-1/16" dia, 32 pitch and 20-degree pressure angle. Measures 3/32" thick on its face with a 1/4" bore and a 15/32" dia x 17/32" long 13-tooth shaft with the same pitch/pressure

Or gear down-for the science fair or for any number of hobby projects. This hard-to-find set of (3) combination spur/beveled gears-for when you want gears set either straight or at 90° to one another-also has one small spur gear, plus three bushings. All in red, green, or blue plastic (we'll pick). The combo-beveled gears are 1-5/8", 1-1/4" and 27/32" dia with 3/16" bores to accept the bushings, which are 3/16" OD, 3/32" ID. The straight gear is 17/32" dia with a 1/16" half-bore. All are 24 pitch.