Teensy tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc. Think miniature bottle brushes. You get a set of (5) brushes: 1/32", 1/16", 3/32", 1/8" and 3/16" dia. All have nylon bristles, are 4" long, and are on a slip ring so you won't lose them.

This excellent 4-piece set of double-ended picks is made of nylon so you won't damage your electronics or electrocute yourself. They have hex-shaped shafts for a good grip, and assorted pick, probe, hook and scraper ends. Equally good for auto detailing or any place where you want to avoid scratching.

Prick tiny bits of gunk from nasty places with these U.S. made hardened stainless steel dental tools. But please don't use them for dental work. They are slight seconds, and some may have been re-worked which only matters to teeth. Trim excess glue from models, place a barrel on the deck of the ship-in-a-bottle, clean a rasp. If you need the strength and durability in a tiny pick, you need these tools. We have an assortment of the sort you've seen laid out on your dentist's tray. We'll pick (3) different ones for you.

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

Winner of this week's "What IS That?" award. It's a watch crab, also called a spanner wrench, that's designed to remove the back from watches, lenses from telescopes, and other thin, flat components from whatever they're attached to. Heavy for its size, it's 1" x 2-3/4" x 3/8" thick, with sharp 1/4" prongs projecting from the edge. The prongs move from 2" to 7/16" apart as you spin the knurled nut between them. An impressive tool to flash in front of your brother-in-law. If he doesn't read our catalog, he won't have a clue!

A really cool mini drill set for your mini projects! The 7-1/4" long aluminum push drill for delicate work comes with (1) 1/16" and (1) 1/32" collet, and (20) bits that fit them. The bits are #61 through #80, some so needle-thin they could add tear ducts to a fashion doll. They come in a mini case marked with the number and size of each bit in mils.

Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.

This battery-operated, hand-held hobby drill, carver and engraver spins at 13,000 rpm and runs on (4) “AA” batteries that you add. Includes a 3/32” chuck with an engraving bit, (2) grinding wheels, and a sharpener; an extra 1/16” chuck with (1) drill bit; and a 1/8” chuck for added tools. Handle and battery case are in a floral pattern, and the unenlightened manufacturer has labeled the package “Her Embosser,” so it serves them right that it ended up discounted at your friendly surplus supplier.

Nice big, 60cc/2+ oz, polypropylene syringe is graduated in 5cc and 1/2 oz increments. Plunger has a black rubber gasket and a thumb ring at the top. Measures 6-1/2” long overall with a 1-7/16” x 5/32” ID nozzle with a cap. Handy in the shop, kitchen or craft room for gluing or decorating.

Sometimes you don’t want lead in your solder. You know this. Our each is a dispenser that feeds approx 109” of lead-free solder in 0.04” dia wire. Solder is 99.3% tin and 0.7% copper. No need to thank us for refraining from lead soldier puns.