SWITCHES

Power Locks

We thought power corrupts, but it turns out otherwise. Power locks. You could put these in a car door, or think up something really kinetically clever. These brand new 12VDC door lock actuator assemblies draw 2.6A pushing or pulling with a 5/8" throw. Measures 6-3/8" overall, 3-3/4" from the tip to the right-angle gear motor, which extends 1-5/16" out from the 1-3/16" thick body. Top has a removable plastic ring, the shaft is covered by a rubber boot and the bottom has 7-1/2" leads with bullet connectors. Comes with an eight-hole 8-7/8" x 9/16" steel mounting bracket, a 8-3/4" rod and assorted screws and mounting hardware.

accent

POWER DOOR LOCK

Power Locks

We thought power corrupts, but it turns out otherwise. Power locks. You could put these in a car door, or think up something really kinetically clever. These brand new 12VDC door lock actuator assemblies draw 2.6A pushing or pulling with a 5/8" throw. Measures 6-3/8" overall, 3-3/4" from the tip to the right-angle gear motor, which extends 1-5/16" out from the 1-3/16" thick body. Top has a removable plastic ring, the shaft is covered by a rubber boot and the bottom has 7-1/2" leads with bullet connectors. Comes with an eight-hole 8-7/8" x 9/16" steel mounting bracket, a 8-3/4" rod and assorted screws and mounting hardware.

accent
$4.50 EACH

Big Switches

These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut. There's also an internal 12V 3W replaceable indicator bulb. Needs 3" of rear clearance. You pick a red, green or yellow lens.

accent

GIANT RED LENS SWITCH

Big Switches

These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut. There's also an internal 12V 3W replaceable indicator bulb. Needs 3" of rear clearance. You pick a red, green or yellow lens.

accent

Relay & Socket

This 5-pin socket is already wired with 9" leads in black, red, white, yellow and blue to its quick-disconnect sockets, ready for your 1/4" or 7mm spade terminals. Housing is slotted so you can interlock them end to end. Measures 1-1/4" x 1-1/16" x 1" thick. Matches our 94746 relay.

accent

12 VDC RELAY

Relay & Socket

This 5-pin socket is already wired with 9" leads in black, red, white, yellow and blue to its quick-disconnect sockets, ready for your 1/4" or 7mm spade terminals. Housing is slotted so you can interlock them end to end. Measures 1-1/4" x 1-1/16" x 1" thick. Matches our 94746 relay.

accent

Wanna Toggle?

The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.

accent

DPDT TOGGLE SWITCH 20A ON-ON (A)

Wanna Toggle?

The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.

accent

Just A Moment…

These little PC-mount SPDT momentary switches from Omron® are rated for up to 0.1A at either 125VAC or 30VDC. Measures 3/4" x 1/4" x 1/4" with a 1-1/4" lever. UL/CSA.

accent

OMRON® 125VAC SPDT MOMENTARY SWITCH

Just A Moment…

These little PC-mount SPDT momentary switches from Omron® are rated for up to 0.1A at either 125VAC or 30VDC. Measures 3/4" x 1/4" x 1/4" with a 1-1/4" lever. UL/CSA.

accent
$3.50 PKG (6)

JUST A SIMPLE SOLENOID

This take-out solenoid valve is a simple open/closed solenoid valve that is normally closed. It draws 100mA at 12VDC. Has 3/16" OD inlet and outlet at right angles to each other. Housing measures 1-3/16" long x 15/16" dia with terminals at the back end.

accent

12 VDC SOLENOID VALVE 10-PACK SAVINGS

JUST A SIMPLE SOLENOID

This take-out solenoid valve is a simple open/closed solenoid valve that is normally closed. It draws 100mA at 12VDC. Has 3/16" OD inlet and outlet at right angles to each other. Housing measures 1-3/16" long x 15/16" dia with terminals at the back end.

accent
$9.95 PKG (10)
$19.95
-50%

Rockers

These panel-mount SPST rocker switches have a switch on one side and a blank face next to it. Rated for up to 10A at 125V and 6A at 250V. Measure 7/8" x 15/16" with snap clips for mounting, a 1-3/16" spacer and quick-disconnect terminals.

accent

SINGLE ROCKER SWITCH

Rockers

These panel-mount SPST rocker switches have a switch on one side and a blank face next to it. Rated for up to 10A at 125V and 6A at 250V. Measure 7/8" x 15/16" with snap clips for mounting, a 1-3/16" spacer and quick-disconnect terminals.

accent
$3.25 PKG (3)

Momentary Rocker

These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA. On-Off-On.

accent

SPDT MOMENTARY ROCKER SWITCH

Momentary Rocker

These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA. On-Off-On.

accent
$2.95 PKG (4)

Switch In Time

Perhaps a switch in time won't save nine, but if you keep getting caught without the goods, and have to rush off to the local high priced supplier, we can help. Of our assortment of (10) switches, (at least (5) different) should have the answer to a wide variety of needs. It contains an assortment which may include toggles, rockers, rotarys or slide switches in a variety of sizes. Chances are you can find what you need, or at least something that will serve. Try it!!

accent

SWITCH ASSORTMENT

Switch In Time

Perhaps a switch in time won't save nine, but if you keep getting caught without the goods, and have to rush off to the local high priced supplier, we can help. Of our assortment of (10) switches, (at least (5) different) should have the answer to a wide variety of needs. It contains an assortment which may include toggles, rockers, rotarys or slide switches in a variety of sizes. Chances are you can find what you need, or at least something that will serve. Try it!!

accent
$5.95 PKG (10)

Little Rocker

This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.

accent

MOMENTARY ROCKER SWITCH

Little Rocker

This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.

accent
$3.25 PKG (4)

Be With You In A Moment

These momentary SPST push-button switches are normally open and measure 11/16" dia x just over 3/16" thick and have a 15/32" shaft with a steel lock-washer & nut plus a pair of 1/8" solder terminals on the bottom. Rated 3A at 125VAC or 1A at 250VAC. You pick red, green or yellow.

accent

GREEN PUSHBUTTON SWITCH

Be With You In A Moment

These momentary SPST push-button switches are normally open and measure 11/16" dia x just over 3/16" thick and have a 15/32" shaft with a steel lock-washer & nut plus a pair of 1/8" solder terminals on the bottom. Rated 3A at 125VAC or 1A at 250VAC. You pick red, green or yellow.

accent
$3.25 PKG (3)

Snazzy Reed Switch

In the universe of reed switches, we're assured that this one is quite snazzy. In a 1" x 9/16" x 3/8" housing with a  3/8" mounting wing with (2) 3/32" mounting holes. Trigger distance is approx 1" regardless of magnet strength. Comes with 20" tinned leads. Rated for 400mA at 24VDC. Normally open.

accent

24VDC REED SWITCH

Snazzy Reed Switch

In the universe of reed switches, we're assured that this one is quite snazzy. In a 1" x 9/16" x 3/8" housing with a  3/8" mounting wing with (2) 3/32" mounting holes. Trigger distance is approx 1" regardless of magnet strength. Comes with 20" tinned leads. Rated for 400mA at 24VDC. Normally open.

accent
$3.25 PKG (2)
img
REED SWITCH
NEW

Are You Reedy?

This thin glass N/O reed switch measures 3/4" long x 3/32" with bent axial leads. We don’t know the amp rating, but it needed a magnet right close to trigger it, so were guesstimating it on the high end. Should be good for light-duty DC applications.

accent

REED SWITCH

Are You Reedy?

This thin glass N/O reed switch measures 3/4" long x 3/32" with bent axial leads. We don’t know the amp rating, but it needed a magnet right close to trigger it, so were guesstimating it on the high end. Should be good for light-duty DC applications.

accent
$3.50 PKG (5)

Push On

And see the red light. This panel-mount SPST push-on/push-off switch from Molex is rated for 125V and has a neon indicator lamp. Measures 2-1/4" x 15/16" x 1/2" with 3/16" quick-disconnect terminals. The panel face is 1-5/16" x 1/2" with plastic wings to keep it in place. The button is marked "AEC." Two contacts for the switch; two contacts for the lamp (diagram included). Latching. UL/CSA. Made in the USA.

accent

MOLEX SWITCH

Push On

And see the red light. This panel-mount SPST push-on/push-off switch from Molex is rated for 125V and has a neon indicator lamp. Measures 2-1/4" x 15/16" x 1/2" with 3/16" quick-disconnect terminals. The panel face is 1-5/16" x 1/2" with plastic wings to keep it in place. The button is marked "AEC." Two contacts for the switch; two contacts for the lamp (diagram included). Latching. UL/CSA. Made in the USA.

accent
$3.00 PKG (3)

Push The Button

These pushbutton switches have (8) sets of SPDT contacts and measure 2-3/8" long (not counting the button) x 1" x 5/8". The contacts for both rows, starting at the pushbutton, are normally closed; common; and normally open with (4) sets in each row. When the pushbutton is engaged, the window at the front is green. We think these were used as buss switches. Made in the USA for ITT/Schadow.

accent

8-CONTACT PUSHBUTTON SPDT SWITCH

Push The Button

These pushbutton switches have (8) sets of SPDT contacts and measure 2-3/8" long (not counting the button) x 1" x 5/8". The contacts for both rows, starting at the pushbutton, are normally closed; common; and normally open with (4) sets in each row. When the pushbutton is engaged, the window at the front is green. We think these were used as buss switches. Made in the USA for ITT/Schadow.

accent
$3.25 PKG (5)
img
10.1 AMP LEVER MICROSWITCHES
NEW

Need Some Microswitches?

Us too, so we bought these interesting little microswitches from Cherry™, rated for 10.1A at 125-250VAC. They’re dual SPDT switches with (2) adjacent levers and N/O and N/C contacts for both. Measure 3/4" x 1/2" x 3/8" with 2.5mm terminals and 7/8" levers. Made right here in the US of A.

accent

10.1 AMP LEVER MICROSWITCHES

Need Some Microswitches?

Us too, so we bought these interesting little microswitches from Cherry™, rated for 10.1A at 125-250VAC. They’re dual SPDT switches with (2) adjacent levers and N/O and N/C contacts for both. Measure 3/4" x 1/2" x 3/8" with 2.5mm terminals and 7/8" levers. Made right here in the US of A.

accent
$3.95 PKG (3)

RED LED

An LED that really shines. The red LED is configured with a resistor and works at 9-12 volts. It's held by a 1-5/8" bracket behind a 1-1/4" x 7/16" x 5/16" deep SPST slide switch, and has (2) 4" leads. All ready to roll.

accent

9-12 VOLT LED

RED LED

An LED that really shines. The red LED is configured with a resistor and works at 9-12 volts. It's held by a 1-5/8" bracket behind a 1-1/4" x 7/16" x 5/16" deep SPST slide switch, and has (2) 4" leads. All ready to roll.

accent
$2.50 PKG (2)

Microswitch

This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.

accent

DEFOND MOMENTARY 3A-6A MICROSWITCH

Microswitch

This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.

accent
$3.25 PKG (5)

Showing 1–18 of 37 results