Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.

Handy 3-pack of syringes, 10ml, 20ml and 60ml, perfect for squirting glues, greases, lubes, paint, whatever you need to squirt. And if you use them as squirt guns, you didn't get the idea from us. Small ones are graduated in 1ml increments; the big one in 2ml. All come with caps, so you don't dribble.

This 9" wide rubber squeegee has a removable 5" handle for storage, e.g. in a glove box. The squeegee itself slides out of the holder and becomes 9" x 3/4" for the ultimate easy storage. Good for car windows, house windows, shower doors, and it just happens to be perfect for our 9" x 12" computer monitor.

Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.

Manual liquid transfer system. Push the plunger and siphon…well, whatever you need to siphon, we don't ask questions around here. Also functions as an air pump. You get the pump, (2) 50" long hoses and adapters for a beach ball and a standard Schrader air valve. Pump itself is 7-1/2" long and the inlet and outlet are both 1/2" ID.

Like a 300-lb Labrador for the shop. Our ceramic lift magnet is mounted in a metal housing with swivel that will attach to a standard threaded broom handle or painter's pole, and lift 20-25 lbs.

Shove these down the throat of your bigger bottles or tubes and clean up. Measure 16" long over all, with 4" long x 1-1/2" dia spiral nylon bristles on a stainless steel handle and a small, but bendable, metal nub on the bottom.

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.

You don’t, huh? They’re called acid brushes because once upon a plumber they were used to apply acid flux to pipes for soldering. Now they’re just the cheap, disposable brushes with hollow aluminum handles you see in glue pots and everywhere else folks need to slather on goopy stuff. Measure 6" long with 5/8” wide bristles.

Hang on to your widgets, screws, bolts, pins and assorted teeny tinies while you're taking things apart. This indispensable 6" dia x 1-1/8" deep magnetic stainless steel dish from Omaha Tools holds all those parts and saves you from crawling around on the floor later, when you're putting things back together.